Using the timer
You can use the Timer button ( ) to decide how much time you want
the appliance to work in different cooking modes.
1 Follow the steps in “Preparing for use”.
2 Press the On/Off button (
3 Press the menu button ( ) once or more times to choose the
desired cooking mode.The corresponding indicator lights up and the
induction cooker starts working in the selected mode.
4 Press the Timer button ( ) and the timer indicator lights up.
5 Press the Increase ( ) or Decrease ( ) button to adjust the
minute.
6
induction cooker turns off automatically.
Note
()again to
cancel the timer.
Setting up child lock
)
for three seconds to enter child lock mode.
Note
) and child lock ( ) buttons
are responsive.
) for three seconds again.
5 Cleaning
Unplug the appliance after the fan stops working and let it cool down.
cleaning agent.
6 Environment
Do not throw away the appliance with the normal household waste
7 Guarantee and service
the Philips website at www.philips.com or contact the Philips Consumer
9 Troubleshooting
If your induction cooker does not function properly or if the cooking
Centre in your country.
Problem Solution
The On/Off button
() does not
respond.
There is a connection problem. Check if the
induction cooker is connected to the mains and
The appliance beeps
continuously and
then stops working.
You may have put unsuitable cookware on
the cooking plate or you may have removed
the cookware from the cooking plate during
cooking. Make sure the cookware is made of
cladding base and has a base diameter larger
than 12cm.
You may have placed the cookware outside of
the cooking zone.
The cookware
does not heat up
to the required
temperature.
The bottom of the cookware may not be
Philips dealer or a service center authorised by
Philips.
The appliance stops
working suddenly.
The temperature of the cookware is too high.
Let the cookware cool down for a while.
The appliance does
not switch from
one preset mode to
another.
You need to switch off the appliance and
restart with another cooking mode.
When pressing
one of the cooking
light of the selected
mode does not go
on.
The light is defective.Take the appliance to your
Philips dealer or a service centre authorised by
Philips.
The fan works but
the appliance has
not started working.
You need to press the Menu ( ) or Keep
warm ( ) button after you have pressed the
ON/OFF ( ) button.
Error code E1 or E2
is displayed on the
screen.
The main sensor is in open circuit or short
circuit state.Take the appliance to your Philips
dealer or a service center authorised by Philips.
Error code E3 or E4
is displayed on the
screen.
The heat sink sensor is in open circuit or short
circuit state.Take the appliance to your Philips
dealer or a service center authorised by Philips.
Error code E5 or E6
is displayed on the
screen.
The voltage is either too high or too low.
Check if the voltage in your home is suitable
for the induction cooker.
1
2
a d
b e
c
f
g n
h o
i p
j q
k r
l s
m
3
1
2
3
4
4
).
1
2
3
4
5
)
()
()
)
)
()
)
)
1
2
3
4
5 )
6
).
5
6
7
9
Philips.
().
HD4959_UM_RU_V1.0_A3x0.75.indd 27/30/2012 4:09:41 PM