Philips AJ5350D User manual

Register your product and get support at
www.philips.com/welcome
AJ5350D
EN User manual

A
B
User manual
DC IN

C
2 sec.
TIME SET

D
SOURCE

E

F

G

H
MP3-LINK
SOURCE

I
2 sec.

1 Important
 Read these instructions.
 Heed all warnings.
 Follow all instructions.
 Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
 Do not install near any heat sources such as radiators, heat

that produce heat.
 Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the
point where they exit from the clock radio.
 
manufacturer.
 Unplug this clock radio during lightning storms or when
unused for long periods of time.
 
is required when the clock radio has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the clock radio,
the clock radio has been exposed to rain or moisture,
does not operate normally, or has been dropped.
 This clock radio shall not be exposed to dripping or
splashing.
 Do not place any sources of danger on the clock radio

 Where the plug of the Direct Plug-in Adapter is used as
the disconnect device, the disconnect device shall remain
readily operable.

2 Your clock radio
Congratulations on your purchase, and welcome to Philips! To fully

www.philips.com/welcome.
What’s in the box
3 Get started
Always follow the instructions in this chapter in sequence.
Connect power
Caution
 Risk of product damage! Make sure that the power voltage
corresponds to the voltage printed on the back or underside of
the clock radio.
 Risk of electric shock! When you unplug the power adapter,
always pull the plug from the socket. Never pull the cord.
 Use the supplied power adapter only.
Note
 The type plate is located at the bottom of the clock radio.

Turn on
Press .
» The clock radio switches to the last selected source.
Switch to standby mode
Press again to switch the clock radio to standby mode.
» 
Set time
Note
 You can only set time in standby mode.
Tip
 When an iPod/iPhone is connected, the clock radio synchronizes time with
the iPod/iPhone automatically.
 The accuracy of the transmitted time depends on the docked iPod/iPhone
that transmits the time signal.
Select a source
Press SOURCE repeatedly to select a source: FM tuner, iPod/iPhone,
or MP3 Link.

Note
 When an iPod/iPhone is docked, the clock radio switches to
iPod/iPhone mode automatically.
4 Play
Play from iPod/iPhone
You can enjoy audio from iPod/iPhone through this clock radio.
Compatible iPod/iPhone
The clock radio supports the following iPod and iPhone models:
Made for.
 
 iPod classic
 
 
 iPhone 4
 
 iPhone 3G
 iPhone

Install HomeStudio App
Philips HomeStudio app brings a suite of new features to your clock
radio, including FM radio programming and a multi-function alarm
clock.To enjoy more features, you are recommended to install this
free HomeStudio app.
Note
 Make sure that your iPod/iPhone is connected to the Internet.
1 Press SOURCE to select the iPod/iPhone mode.
2 Insert your iPod/iPhone into the dock.
3 HomeStudio app
on your iPod/iPhone.
4 Tap [Yes] 
5 Follow the on-screen instructions to complete the installation.
Play music in the iPod/iPhone
Note
 Make sure that you have installed the HomeStudio app on your
iPod/iPhone.

1 Tap HomeStudio icon on your iPod/iPhone.
» The clock/alarm setting screen appears.

2 

3  .
» Music streams from your iPod/iPhone to the clock radio.
Use more features with “HomeStudio App”
Note
 Make sure that your iPod/iPhone is inserted into the clock
radio.
Set clock, alarm and sleep timer:
1 Launch the HomeStudio app.

2 On the screen below, tap the setting icon .
» You can set clock, sleep timer, and alarm for your clock radio.

Note
 The alarms set with your clock radio will appear under [Dock Alarm]

 You can also set more alarms by tapping on the top right of the alarm
setting screen.

Store FM radio stations manually:
1 
2 Press to tune to a radio station.