Philips DC146/05 User manual

iPOD
PROG
MENU
MUTE
OK
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
DC146
1
Quick Start Guide
2
User Manual
Quick Start Guide User Manual
Remote Control
4 Dock Adaptors
DC146_QSG_05_ASDA_Eng 4/7/10, 11:511

speaker
(right)
speaker
(left)
FM wire antenna
AC power cord
A
B
1
2
Connection
Connect the speaker wires to the SPEAKERS terminals.
Connect the power cord of the system to the AC power outlet.
Tip:
It is unnecessary to connect the FM pigtail antenna since it
is fixed to the main unit.
2
1
DC146_QSG_05_ASDA_Eng 4/7/10, 11:512

5
1
2
3
4
Setting the clock
In standby mode, press and hold CLOCK/DISPLAY on the
remote control set for 2 seconds.
Press PROG to select 12-hour or 24-hour display.
Press CLOCK/DISPLAY to confirm.
➜The clock digits for the hours flash.
Press TUNING 4 ¢ (4 ¢ on the remote
control) to set the hours.
Press CLOCK/DISPLAY again.
➜The clock digits for the minutes flash.
Press TUNING 4 ¢ (4 ¢ on the remote
control) to set the minutes.
Press CLOCK/DISPLAY to confirm the time.
6
7
1
2
3
4
5
Playing a disc
Select CD source.
Lift the CD door on the top of the system to open the CD compartment.
Insert a disc with the printed side facing up and press down
on PULL TO OPEN to close the CD door.
PressÉÅto start playback.
Press 9to stop playback.
iPOD
PROG
MENU
MUTE
OK
iPOD
PROG
MENU
MUTE
OK
Enjoy
DC146_QSG_05_ASDA_Eng 4/7/10, 11:513

Tip:
Detailed playback features and
additional functions are described in
the accompanied user manual.
1
2
Select TUNER source.
Press PROG on the remote control for more than two seconds to program all available stations
in order of waveband.
Press PRESET +/- until the desired preset station is displayed
Programming and tuning to radio stations
3
Notes for the remote control:
– First, select the source you wish to
control by pressing one of the source select
keys on the remote control (CD or AUX, for
example).
–Then select the desired function ( 2;,
4, ¢for example).
1
2
Press PUSH TO OPEN to open the dock.
Select the dock adaptor of the correct type and size, and snap it into the dock.
Correctly place your iPod in the dock.
Press SOURCE repeatedly or DOCK on the set (iPOD on the remote
control) to select iPod source.
➜The connected player will play automatically.
Playing iPod using the dock
3
4
MIC
PUSH TO OPEN
DOCK FOR iPOD
RO SYSTEM DC146
SOURCE
DOCK
STANDBY-ON
REPEAT DBB
CD/CD-R/CD -RW COMPATIBLE
PRESET
iR
VOL
VOL
TUNING
Enjoy
C2010 Koninklijke Philips Electronics N.V.
All rights reserved.
http://www.philips.com DC146_05_QSG_V2.0_1014.2
DC146_QSG_05_ASDA_Eng 4/7/10, 11:514