Philips DC320/37 User manual

1
Quick start guide
EN
What’s in the box
2
Connect
Setup
Enjoy
3
© Royal Philips Electronics N.V. 2009
All rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
Printed in China
DC320_37_QSG_V1.0
Quick Start Guide
User Manual
User Manual
Quick Start Guide
Register your product and get support at
www.philips.com/welcome DC320
Docking Entertainment System
AC power
adaptor
Remove control
1Connect
Connect power
A
1Prepare the AC power adaptor.
2Connect one end of the AC adaptor
to the DC IN socket on the main
unit.
3Connect the other end of the AC
adaptor to the wall outlet.
a
b
c
MP3 link cableMain unit

Setup
2
1In standby mode, press and hold SET
TIME/PROG for 2 seconds.
[12 HR] begins to blink.»
2 Press
/to select 12/24 hour
format.
3 Press SET TIME/PROG to confirm.
The hour digits begin to blink.»
4 Press
/to set the hour.
5 Press SET TIME/PROG to confirm.
The minute digits begin to blink.»
6 Repeat steps 4-5 to set the minute,
year, month, and day.
Set time and date
A
1In the tuner mode, press and
hold SET TIME/PROG for
more than 2 seconds to activate
automatic program mode.
»All available stations are
programmed in the order of
waveband reception strength.
The first programmed radio»
station is broadcast automati-
cally.
2Press PRESET +/- to select a
preset number.
E Tip
Detailed functions and features are•
described in the user manual.
Program and listen to
radio stations
APlay from iPod/iPhone B
Setup
2
Set the alarm timer
B
Activate and deactivate the alarm timer
1Press ALM 1 or ALM 2 repeatedly
to activate or deactivate the timer.
If the timer is activated, [»AL 1]
or [ AL2] is displayed.
If the timer is deactivated,»
[ AL1] or [ AL2] disappears.
Repeat alarm
1 When the alarm rings, press
BRIGHTNESS/REP ALM.
The alarm repeats ringing»
minutes later.
E Tip
You can press•
/to adjust the
interval to repeat alarm.
Stop alarm ring
1When the alarm rings, press the
corresponding ALM 1 or ALM 2.
The alarm stops but the alarm»
settings remain.
1Place the iPod/iPhone in the dock.
2 Press SOURCE repeatedly to
select iPod/iPhone source.
The connected iPod/iPhone»
plays automatically.
To pause• /resume play, press
.
To skip to a track, press•
/ .
Enjoy
2
3
You can set two alarms which go off at
different time.
1 Ensure that you have set the clock
correctly.
2 Press and hold ALM 1 or ALM
2for 2 seconds.
[AL 1] or [AL 2] begin to»
blink.
3 Press SOURCE to select an alarm
sound source: iPod/iPhone, iPod/
iPhone playlist, FM tuner, or
buzzer.
4 Press ALM 1 or ALM 2.
Hour digits begin to blink.»
5 Press / repeatedly to set
the hour.
6 Press ALM 1 or ALM 2 to con-
firm.
Minute digits begin to blink.»
7 Repeat steps 5-6 to set the minute.
8 Repeat steps 5-6 to select wheth-
er to ring alarm the whole week,
on weekdays, or at weekend.
9 Repeat steps 5-6 to set the alarm
volume.
Enjoy
2
3
To search during play, press•
and hold / , then release
to resume normal play.
To go back to previous iPod/•
iPhone menu, press MENU.
To scroll through the menu,
press PRESET +/-. To
confirm a selection, press
OK/.
If no key is pressed for»
more than 10 seconds,
OK/ acts back as the
play/pause key.