Philips DVP3040K/51 User manual

1Connect
Basic Connection A
Before Connecting
You only need to make one video and audio connection, depending on the capabilities of your TV. B
SCART connection to TV
A SCART connection will let you use features both audio and video on the DVD player.
AUse the black SCART cable (not supplied) to
connect the SCART socket (TV OUT) on the rear panel of the DVD player and the SCART input socket at the rear of the TV.
BPlug in the power cable from the DVD player to an
AC power outlet.
Note See the accompanying user manual for other possible connections (e.g. S-VIDEO, Component Video).
2Set up
A
Insert batteries in Remote Control
ARemove batteries compartment cover. BInsert the provided batteries in the remote control.
Take note of where the positive and negative ends should go.
CReplace the batteries compartment cover. B
Finding the viewing channel
APress STANDBY-ON on the DVD player’s
remote control.
BSwitch on the TV. CPress SETUP.
Go to General Setup Page
Disc Lock Display Dim Program OSD Language Sleep DIVX(R) Vod Code
- - General Setup Page - -
DPress ‘0’ on the TV’s remote
control, then repeatedly press the Channel Down button until you see the DVD background screen. This is the correct viewing channel for the DVD player.
Note For some TVs, to nd the correct viewing channel, you can keep pressing the AV or SELECT buttons, If still unable to nd the correct viewing channel, check the connections again or check your TV’s user manual.
SCART IN
SCART IN
To SCART In socket on the TV
Television (rear)
C
TV settings basic setup
Use the DVD player’s remote control to select the settings that matches your country of residence and the TV settings. Selecting TV Settings APress
Xto select {Video Setup Page}.
BPress STto highlight one of the options, then
press Xto enter into the submenu.
In {TV Type}. options to select {PAL/NTSC/Multi} In {TV Display}, options to select {4:3 Panscan/4:3 Letterbox/16:9}
CPress
STto highlight one of the options in the
submenu according to your country of residence and the TV settings.
DSelect an option and press OK.
Note Follow the instructions shown on the TV to
conrm the selection (if any).
D
Language preference setup
Use the DVD player’s remote control to select the desired On-screen language, Audio language, Subtitle language and Menu language you preferred. Selecting On-screen language APress
Xto select {General Setup Page}.
BPress STto highlight {OSD Language}, then press
X.
CPress STto select a language and press OK.
Note The On-screen language for the setup menu will
remain once you set it, regardless of various disc languages.
Selecting disc languages APress
Xto select {Preference Page}.
BPress STto highlight one of the options, then
press Xto enter into the submenu.
In {Audio} - select disc’s soundtracks languages In {Subtitle} - select disc’s subtitles languages In {Disc Menu} - select disc’s menu languages
CPress STto select a language and press OK.
Note If the language selected is not available on the
disc, the disc’s default language will be used instead.
From SCART Out socket on the DVD Player
DVD Player (rear)
Remote Control (rear)
DVD Player (front)
1_dvd3040_qsg_51_eng.indd 11_dvd3040_qsg_51_eng.indd 1 2005-10-28 3:06:45 PM2005-10-28 3:06:45 PM

3Enjoy DVD Video Player DVP 3040K
Quick Start Guide
Connect Set up
Enjoy
1
2
3
What’s in the box?
Need help? User Manual For more product information refer to the user manual of the DVD player Online Go to www.philips.com/support
2005 CKoninklijke Philips N.V. All rights reserved. www.philips.com SL/0543/51_2
B
Start playback
APlayback may starts automatically when a disc has
been loaded in the disc tray.
Note If a disc menu appears on the TV:
1) Press STWXto scroll through the options
available in the DVD menu.
2) Press PLAY XÅon the option you want to
start playback
BPress PLAY XÅto start playback. CTo stop playback, press STOP Ç. DPress DISC MENU to go back to the disc menu
anytime.
A
Inserting disc
APress OPEN/CLOSE on the front of the DVD
player.
Note You can also hold down the STOP Çbutton on the remote control to open and close the disc tray.
BPlace a disc into the disc tray with the label facing
up. For doubled-sided discs, load the side you want to play facing up.
CPress OPEN/CLOSE on the front of the DVD
player again to close the disc tray.
DVD player (front)
Troubleshooting For more troubleshooting tips, see the user manual. Problem Tip No power • Check if the AC power cord is properly connected. • Press the STANDBY-ON on the front of the DVD player to turn on the power. No picture • Check connection to TV and ensure the plugs are rmly in place. No sound or distorted sound • Adjust the volume • Check audio connections are in the correct input source. Remote control does not work • Check the batteries are loaded correctly or replace the batteries with new ones. • Reduce the distance between the remote control and the DVD player.
• Point the remote control directly toward the IR sensor.
DVD Video Player
Video cable
(yellow plug)
Remote Control
and 2 batteries
User Manual
Audio cables
(red & white plugs)
Quick Start Guide
1_dvd3040_qsg_51_eng.indd 21_dvd3040_qsg_51_eng.indd 2 2005-10-28 3:06:54 PM2005-10-28 3:06:54 PM