Philips DVDR70/051 User manual

Quick install guide
Connecting your DVD recorder to the V
set /Initial installation
Warning ! As long as the initial installation has not been carried out, the buttons on
the front of the DVD recorder remain without function.
1Remove the aerial cable plug from your TV set. Insert it into the
ANTENNA IN socket at the back of the DVD recorder
2Insert one end of the supplied aerial cable into the TV OUT socket at
the back of the DVD recorder and the other end into the aerial input
socket of the TV set.
3Connect socket EXT 1 TO TV-I/O or sockets OUT S-VIDEO
(Y/C) ,OUT VIDEO (CVBS) ,OUT L AUDIO R with the
corresponding sockets of your TV set.
My V sets supports the functions Easy Link, Cinema Link,
Nex View Link, Q1link, Smart Link, Megalogic, Datalogic,...
Connect the scart socket EXT 1 TO TV-I/O at the back of the DVD
recorder with the - suitable for data transfer - scart socket of your TV set
(see the instruction manual of your TV set) using a special cable (suitable for
these data transfers). ?
4Switch on the TV set.
5Use the supplied mains cable to connect the mains socket
4MAINS at the back of the DVD recorder with the wall outlet.
The most important features of the DVD recorder will appear in
scrolling text on the display. After the first installation is completed
this function will be switched off.
6Switch on the DVD recorder using STANDBY/ON m.
IS TV ON? 7'IS TV ON?' will appear on the display.
Virgin mode
Menu Language
English
Español
Français
Italiano
Deutsch
Press OK to continue
8If necessary, select the programme number for the input socket at the
TV set.
The initial installation menu appears on the screen.
9Select your favourite setting using CH- Bor CH+ A.
Confirm with OK .
The initial installation is carried out automatically. Wait until the whole procedure is complete.
ENGLISH

How to make a recording
1Press MONITOR to view the currently selected input signal on the
screen.
2Select the programme number from which to record using
CH+ Aor CH- B.
Recording via external sockets
Using CH+ Aor CH- B, select the front socket ('CAM1') or the sockets
('EXT1', 'EXT2') at the back of the DVD recorder, from which you wish to
record.
Selecting the recording mode (quality)
Using REC MODE , you can choose between 'M1' (camcorder recordings/1
hour), 'M2' (2 hours), 'M2x' (2,5 hours), 'M3' (3 hours) or 'M4' (4 hours) or
'M6' (6 hours).
SAFE1RECORD
Normally, a recording always begins at the position where the previous
recording ended. All subsequent recordings will be erased.
If you want the new recordig to be made at the end of all the other
recordings, hold down REC/OTR nuntil 'SAFE REC' appears on the display. ip
3Press RECORD or REC/OTR nto start the recording.
a'NO SIGNAL' (no signal) will appear on the display
bCheck whether the cable connectors are properly inserted.
bIf the recording is to be made from a video recorder, change the 'tracking'
setting on the video recorder.
bIn case of bad or non-standard video input signals, the DVD recorder may
be unable to detect the signal. Problem
How to program a recording
1Switch on the TV set. If required, select the programme number for
the DVD recorder.
2Press TIMER on the remote control.
Timer
Timer programming
Date
01
Prog
BBC1
Start
20:15
VPS
PDC End
21:30
Rec
Mode
M1
Mo-Fr/Weekly
Press SELECT
To store
Press OK
3Select 'Timer programming' using CH- Bor CH+ Aand confirm
with C.
The current information is displayed.
4Select the field using Dor C.
5Enter the data you want using CH- B,CH+ A, or with the
number buttons 0..9 .
6Confirm with OK .
The information has been stored in a TIMER block.
7To end, press TIMER .
8Switch off the DVD recorder using STANDBY m.
A programmed recording functions only if the DVD recorder has been switched off using
STANDBY m.
ENGLISH
3139 246 12791 3103/000 (WwnnNwWnNnnwNnWNwwnNnwnNWNwnwN) DVDR 70/051