Philips HX3631/07 User manual

4235.020.6204.2
6 Automatically turns off after
two minutes.
7 Replace brush heads every
3 months or sooner if needed.
The toothbrush is safe to use on:
- Braces (brush heads wear out
sooner when used on braces).
- Dental restorations ( llings,
crowns, veneers).
CLEANING AND
STORAGE
Clean head with water and wipe
handle regularly with a damp cloth
only. Store in a cool dry location
when not used.
DISPOSAL
At product end of life - do not
throw away in trash can; recycle
products and batteries appropriately.
WARRANTY
This product is warranted for 1 year
from the date of purchase. What is
not covered under the warranty:
- Brush heads
- Replacement batteries
- Damage from misuse, abuse,
neglect alterations, unauthorized
repair/parts.
- Normal wear and tear including
discoloration or fading.
For complete warranty details,
visit www.philips.com/support and
download the operator’s manual
with full warranty details.
Questions: Call 1-800-682-7664
HX3600
4235_020_6204_2_Leaflet_88x124_v1.indd 1 2/12/13 11:47 AM

IMPOR-
TANT
SAFE-
GUARDS
READ ALL INSTRUCTIONS
BEFORE USE
Warnings
- Use only as intended and with
manufacturer attachment.
- Use only 1.5 V AA Alkaline
batteries. Always replace with
two new batteries; never mix old
and new batteries.
- Supervise use by children and
persons with reduced physical,
sensory or mental capabilities.
- Discontinue use if any part of this
product appears damaged in any
way (brush head and handle).
- Use this product only for its
intended use. This is not a toy.
- Consult dentist or physician if you
experience signicant bleeding, dis-
comfort, pain or medical concerns.
SAVE
THESE
INSTRUC-
TIONS
Electromagnetic elds (EMF)
This appliance complies with current
standards regarding electromagnetic
elds (EMF). If used as directed, this
appliance is safe.
OPERATING
INSTRUCTIONS
Note: Not intended for use on multiple
patients in a dental practice or institution.
1 Pull battery cap down. Install
2 size 1.5 V AA Alkaline
batteries. Proper battery
direction is indicated under
cap. Do not use the product
without battery cap installed.
2 Install brush head by placing on
metal shaft and pushing down.
Remove brush head by pulling up.
Note:A gap between brush head and
handle is normal.
3 Avoid splattering: place brush
in mouth before turning on.
4 Press power on/off button to
turn on.
5 Brush normally with light
pressure for 2 minutes.
4235_020_6204_2_Leaflet_88x124_v1.indd 2 2/12/13 11:47 AM