Philips Sonicare DiamondClean Instruction Manual

Frequently Asked Questions
Can I replace the battery of my Philips
Sonicare Toothbrush?
The rechargeable battery inside your Philips Sonicare Toothbrush cannot be replaced.
Which accessories are available for my
Philips Sonicare Toothbrush?
If you are looking for new parts and accessories for your Philips Sonicare Toothbrush, please
follow the steps below to find out which accessories are compatible with your Philips Sonicare
Toothbrush.
Accessories for Philips Sonicare Toothbrush
Follow these steps to see which accessories are available for your Philips Sonicare Toothbrush:
1. Go to Philips' parts and accessories page
2. Use the search bar to search by model number or navigate to your product
3. Once on the electric toothbrush overview page, you can use the filters on the left to specify your
search
Please contact us if you need further assistance.
s my Philips Sonicare Toothbrush safe for
kids?
All Philips Sonicare Toothbrushes are safe to use for children. It is important to advise and
properly guide them on how to correctly use the toothbrush. Below you can also find Philips
Sonicare toothbrush that will be better suitable for your kids.
Philips Sonicare for Kids toothbrush
For a better-suited option, the Philips Sonicare for Kids toothbrush is built for kids for ages 3+.
It is a specially designed electric toothbrush for kids that help them learn about oral care through
play, which also comes with an app.

Can I use my Philips Sonicare Toothbrush in
the shower?
It is completely safe to use your Philips Sonicare Toothbrush in the shower. Make sure to never
store your Philips Sonicare Toothbrush in the shower between brushings. Allow the toothbrush
to air-dry between uses. Also, do not place the charger where it might risk contact with water.
Can I use my Philips Sonicare charger with
other toothbrushes?
Philips Sonicare chargers are designed to fit the matching toothbrush handle, however, some
models are interchangeable. Find out below if your charger is compatible with other Philips
Sonicare toothbrushes.
Interchangeable Philips Sonicare chargers
Below you will find a list of Philips Sonicare toothbrushes that are compatible with other
chargers:
EasyClean toothbrush
ExpertClean toothbrush
ExpertResults toothbrush
Flexcare Platinum Connected toothbrush
FlexCare Platinum toothbrush
FlexCare+ toothbrush
FlexCare toothbrush
HealthyWhite toothbrush
HealthyWhite+ toothbrush
ProtectiveClean toothbrush
2 Series Plaque Removal toothbrush
3 Series Gum Health toothbrush
Essence+ toothbrush
Sonicare for Kids
Philips Sonicare AirFloss
The DiamondClean and DiamondClean Smart chargers
The DiamondClean and DiamondClean Smart chargers are not interchangeable with each other
or with other Philips Sonicare toothbrush handles. Even if the charging light on the handle
blinks, it will not charge properly.

We advise to always use the charger that comes with your Philips Sonicare DiamondClean and
DiamondClean Smart toothbrush.
Can I use my Philips Sonicare Toothbrush in
the shower?
It is completely safe to use your Philips Sonicare Toothbrush in the shower. Make sure to never
store your Philips Sonicare Toothbrush in the shower between brushings. Allow the toothbrush
to air-dry between uses. Also, do not place the charger where it might risk contact with water.
Can I leave my Philips Sonicare Toothbrush
on the charger?
You can always keep your Philips Sonicare Toothbrush on a plugged-in charger between
brushings. This will not affect the battery lifespan of your toothbrush.
Why is there a gap between my brush head
and Philips Sonicare handle?
The gap between the brush head and the Philips Sonicare handle is completely normal. Find out
why there is a gap between the brush head and the handle.
A small gap is necessary
A small gap is necessary. The Philips Sonicare Brush head must be free to move in order to
deliver the vibrations needed to clean your teeth.
However, the brush head should not be loose and slip off your toothbrush easily. If this occurs,
please contact us for further assistance.
What are the differences in modes of my
Philips Sonicare Toothbrush?
Some Philips Sonicare Toothbrush models come with different brushing modes. Find out what
the differences are in brushing modes.
Brushing modes

Brushing modes vary across Philips Sonicare Toothbrushes. Please refer to the user manual for
the specific modes that come with your toothbrush.
The brushing modes run for different lengths of time:
Clean mode has a higher frequency of vibrations in comparison to a standard mode for
better cleaning. Brushing time is 2 minutes
Deep Clean mode is for extra cleaning. The unique motion of the brush head in this
extended three-minute mode is more powerful than any other mode. Brushing time is 3
minutes
White mode is a two-minute clean mode, followed by a 30-second polishing mode.
Brushing time is 2:30 minutes
Polish mode runs at a lower frequency of vibrations than the standard cleaning mode.
Brushing time is 1 minute
Gum Care mode has a 1-minute massage cycle after the standard 2-minute clean mode
to clean your gums. Brushing time is 3 minutes
Gum Health mode has an extended massage cycle after the standard 2-minute clean
mode to clean your gums. Brushing time is 3:20 minutes
Sensitive mode has a lower frequency of vibrations in comparison to the standard mode.
Brushing time is 2 minutes
Tongue Care mode is a 20-second mode designed to clean your tongue, together with
the Tongue Care brush head. Brushing time is 20 seconds
How often can I use my Philips Sonicare
toothbrush per charge?
Do you want to know the operating time of your fully charged Philips Sonicare toothbrush? Find
the operating time for your Philips Sonicare tootbhrush.
Operating time for each toothbrush
Below operating times are based on a full charge and regular use (twice a day). It can take up to
24 hours before your Philips Sonicare toothbrush is fully charged. To avoid an empty battery,
you can always leave your toothbrush on the charger between brushings.
Operating time from a full to empty
DiamondClean Smart; up to 2 weeks
DiamondClean; up to 3 weeks
Flexcare Platinum Connected; up to 2 weeks
Flexcare and Flexcare+; up to 3 weeks
ProtectiveClean; up to 2 weeks
3 Series; up to 3 weeks
2 Series; up to 2 weeks

Healthywhite+; up to 3 weeks
Essence+; up to 10 days
Essence; up to 2 weeks
Can I pause my Philips DiamondClean
toothbrush mid-use?
You can pause the brushing cycle of your Philips Sonicare DiamondClean Toothbrush after 5
seconds of use. Before the 5 seconds of use, the handle will simply switch modes. To pause
brushing, press the power button. Press the power button again to resume the brushing cycle. If
your toothbrush is paused for more than 30 seconds, the brushing cycle will reset.
How to use my Philips Sonicare Toothbrush
with braces
All Philips Sonicare Toothbrushes are suited for braces. Use this instructional video to brush
your teeth with the Philips Sonicare Toothbrush while wearing braces.
Instructions to brush your teeth wearing braces
1. Wet the bristles of the brush head
2. Apply a small amount of toothpaste
3. Place the bristles against your teeth at a 45° angle
4. Press the power button to start brushing
5. First, brush above the brackets. Then below the brackets
6. Finally, clean between your braces with a circular motion
Please do not force the bristles into the gaps of your braces.
How to charge my Phillips Sonicare
Toothbrush
Depending on the model you have, you can charge your Philips Sonicare Toothbrush with a
normal charger, charging glass, travel case or charging pad. Find out how to charge your Philips
Sonicare Toothbrush.
Charging your Philips Sonicare Toothbrush
1. Plug the charger in a live outlet

2. Place the handle on the charger
3. The battery indicator will start flashing to indicate that your toothbrush is charging.
The battery indicator stops flashing when your toothbrush is fully charged. It can take up to 24
hours before your toothbrush is fully charged.
Charging your DiamondClean Toothbrush with the
charging glass
Follow these instructions on how to charge your DiamondClean or DiamondClean Smart
Toothbrush with the charging glass
1. Place the handle in the charging glass or stand and place it on the charging base
2. Plug the charging base in an outlet
3. The battery indicator will start flashing white or green to indicate that your toothbrush is
charging.
The battery indicator stops flashing when your toothbrush is fully charged. It can take up to 24
hours before your toothbrush is fully charged.
Charging your DiamondClean Toothbrush with the travel
case

Follow these instructions on how to charge your DiamondClean or DiamondClean Smart
Toothbrush with the travel case
1. Place the handle in the travel case
2. Connect a mini USB cable from the travel case to the USB adapter or a laptop
3. Some models come with a build in USB cable which is located at the bottom of your
travel case.
4. The battery indicator will start flashing white or green to indicate that your toothbrush is
charging
The battery indicator stops flashing when your toothbrush is fully charged. It can take up to 24
hours before your toothbrush is fully charged.
Charging your DiamondClean Toothbrush with the
charging pad
Follow these instructions on how to charge your DiamondClean Toothbrush on the wireless
charging pad.
1. Plug the USB cable into the wall adapter and plug into a live outlet
2. Place the handle on the raised surface of the charging pad
3. The charging pad beeps and the battery indicator will start flashing white to indicate that
your toothbrush is charging.
The battery indicator stops flashing and turns solid white when your toothbrush is fully charged.
It can take up to 12 hours before your toothbrush is fully charged.

How to recalibrate Philips Sonicare
toothbrush pressure sensor settings
If your Sonicare pressure sensor is too sensitive, or not sensitive enough, you can re-calibrate the
pressure sensor settings.
How to calibrate the pressure sensor settings
1. If your handle is currently on the charger, please remove.
2. Place your handle on the charger. Make sure that the charger is plugged in to a live outlet.
Leave the handle on the charger for at least 45 seconds.
3. Remove your handle from the charger and place it back on the charger for at least 45
seconds four more times.
How to change the modes and intensity
settings on my Philips Sonicare toothbrush
If you would like to change the brushing modes or intensity settings on your Philips Sonicare
toothbrush, find out below on how you can do so.
Changing the brushing modes
Your Sonicare toothbrush comes with 5 different modes to accommodate all your oral care needs
(some models come with 4 brushing modes only): Clean, White+, Gum Health, Deep Clean and
Tongue Care (Specific models only).
To change the brushing modes on your Philips Sonicare toothbrush, follow these simple steps:
1. Turn off your Philips Sonicare toothbrush
2. Press the mode/intensity button (or the power button if you have a Philips Sonicare
DiamondClean) to change and select the preferred brushing mode
3. Your Philips Sonicare toothbrush will remember the selected mode for your next
brushing session.
The above steps work for Philips Sonicare DiamondClean Smart, ExpertClean, Expert Results,
and Protective Clean 5100 and 6100 Series.
Note: The brushing modes settings may vary depending on the toothbrush handle and not all
Sonicare toothbrush models have brushing modes available.
Changing the intensity settings

Your Sonicare toothbrush gives you the option to choose between 3 different intensity levels:
low, medium and high. Based on the brush head you attach, the intensity will be selected
automatically. If you wish to change to a different intensity, you
can do so by pressing the mode/intensity button while brushing.
Note: The above steps work for Philips Sonicare DiamondClean Smart, ExpertClean, Expert
Results, Protective Clean 5100 and 6100 Series. For Sonicare toothbrush handles with an
Intensity Level Panel on the handle, press the intensity panel up or down to adjust the intensity
level.
How do I charge my Philips Sonicare
toothbrush
Depending on which Philips Sonicare toothbrush model you have, below you will find step-by-
step instructions how to charge your toothbrush properly.
Charging most Philips Sonicare toothbrushes
To charge your Philips Sonicare toothbrush, follow the simple steps below:
1. Plug the charger into a live electric power outlet
2. Place the handle on the charger
3. The charging indicator lights will flash green until your handle is fully charged
The above steps apply to the models below:
EasyClean toothbrush
ExpertClean toothbrush
ExpertResults toothbrush
Flexcare Platinum Connected toothbrush
FlexCare Platinum toothbrush
FlexCare+ toothbrush
FlexCare toothbrush
HealthyWhite toothbrush
HealthyWhite+ toothbrush
ProtectiveClean toothbrush
2 Series Plaque Removal toothbrush
3 Series Gum Health toothbrush
Essence+ toothbrush
Sonicare for Kids
Philips Sonicare AirFloss
Note: It takes at least 24 hours to fully charge the battery.

DiamondClean and DiamondClean Smart toothbrush models come with unique charging
components. These chargers are not interchangeable across the DiamondClean toothbrush
family. If a handle is put in the incorrect charger, it may appear to look as if it's charging,
but it is not. Be sure to use the charger that came with your toothbrush
See below for more detail on DiamondClean and DiamondClean Smart toothbrushes.
Charging Philips Sonicare DiamondClean and
DiamondClean Smart toothbrushes
1. Plug the chrome base charger into a live electric power outlet
2. Place the glass (or charging puck) on the chrome charging base
3. Place your Philips Sonicare DiamondClean or DiamondClean smart into the glass in an
upright position
4. The flashing light on the handle indicates that the toothbrush is charging. If the battery is
very low and the indicator does not start flashing, keep the handle in the charger for at
least 10-15 minutes to allow the toothbrush to recover
Note: It takes at least 24 hours to fully charge the battery.
Note: The DiamondClean Smart toothbrushes (in addition to a flashing battery indicator) will
also lit up on the bottom and will beep twice when placed in the glass charger.
Charging Philips Sonicare DiamondClean toothbrush using
the travel case
If you would like to charge your Philips Sonicare DiamondClean toothbrush using the travel
case, follow these easy steps:
1. Place the handle in the travel case
2. Connect the mini USB cable that came with the travel case to the USB adapter or a laptop