Philips Clearflood Large BVP651 User manual

BGP221/231
Clearood Large
1/20
583 4430 000 20878 _C
© 06 / 2019, SignifyHolding. All rights reserved
Printed in Spain
Data subject to change without notice
740 / 757
LED800-4S
184
80000 540 25 15
-40 24kg
LED750-4S 75000 495 35 25
LED700-4S 70000 455 45*
35
LED650-4S 65000 420
LED600-4S 60000 380
45
LED550-4S 55000 345
LED500-4S 50000 310
LED450-4S 45000 275
LED400-4S 40000 245
LED350-4S 35000 210
830
LED650-4S
184
65000 540 25 15
-40 24kg
LED600-4S 60000 495 35 25
LED570-4S 57000 465
45 35
LED530-4S 53000 425
LED490-4S 49000 385
LED440-4S 44000 345
LED400-4S 40000 310
LED360-4S 36000 275
LED310-4S 31000 235
*only with OFA52 and S optics. (ETO based)
BVP651
0,25m
At 90º 0,41m2At 0º 0,05m2At 15º 0,13m2
Inrush Current (230VAC) (Apk/ms)
Luminaire Surge Protection
Luminaire Surge Protection with SPD Optional
340/220
4KV
10KV
Type of electrical protection installation Maximum number of luminaires to install
MCB16A B TYPE 1
C TYPE 3
MCB10A B TYPE 1**
C TYPE 2**
** Only in luminaires with CityTouch
Outdoor Indoor
RG1
Outdoor Indoor
T ambient = 25 ºC 30ºC 35ºC 40ºC 45ºC T ambient = 25 ºC 30ºC 35ºC
Flux Reduction (%) -1% -2% -3% -4% Flux Reduction (%) -1% -2%
If Ta<45ºC, there are no restrictions in the position of the luminaire.

WARNING
This luminaire must be installed by qualied personnel only
Disconnect before servicing
Use gloves to install/service the luminaire
The space between U-shape bracket and luminaire could be a pinch point
Keep hands clear during operation.
Free rotation of the U-shape bracket can cause damage to painted parts
Always follow this mounting instructions to x the luminaire
Never modify the luminaire nor the xation locations for
installation
Risk of accident due to incorrect tightening torque
2/20

Position A
Position B
CITYTOUCH
VERSION
STANDARD VERSION
3/20

Unscrew Bolts 1 and 2 (2x)
For B-type installation>3m,
additional 2nd xation device
is mandatory
Never include more screws than indicated in
this mounting instruction
For Australia, the maximum
allowed tilt angle is 25º
Do not forget to screw the
bolt with the torque indicated
Fixation screws: Stainless steel
- EN-10027-2: 1.4301 (X5CrNi18-10)
- AISI: 304
- ISO: A2
SET TILT
Set tilt of luminaire Fix screws 1 and 2 (2x)



LUMINAIRE FIXATION
A: Two screws B: One screw
Do not forget to screw the
bolt with the torque indicated
(ocial installation xation locations)
19 50 30 50
4/20

STANDARD, CONTROL LINE, DALI,
DALI IN/OUT CONNECTIONS
MAINS CONNECTOR
Ø10-14 mm 2-4 mm2
SECONDARY CONNECTOR (2x)
(Only DALI IN/OUT versions)
Ø7-12 mm 0,5-1,5 mm2
8
4
5/20
CITYTOUCH BOX INSTALLATION / FIXATION

WIRE CONNECTION TO WIELAND
The connectors are not for current
interruption.
Never connect or disconnect under
load
1
5
26
6/20

PSU, PSA (D13), PSDD (D18) CONNECTION
Mains connector Class-I Mains connector Class-II
LLINE
(Brown) 1LINE (Brown)
GROUND
(Yellow &
Green)
2 -
NNEUTRAL
(Blue) 3NEUTRAL (Blue)
1 - 4 -
2 - 5 -
PSR (D4) CONNECTION
Mains connector Class-I Mains connector Class-II
LLINE
(Brown) 1LINE (Brown)
GROUND
(Yellow &
Green)
2 -
NNEUTRAL
(Blue) 3NEUTRAL (Blue)
1 Lc (L2) 4 Lc (L2)
2 Nc 5 Nc
7/20
TYPES OF MAINS CONNECTOR

PSD, (D9) CONNECTION
Mains connector Class-I Mains connector Class-II
LLINE
(Brown) 1LINE (Brown)
GROUND
(Yellow &
Green)
2
NNEUTRAL
(Blue) 3NEUTRAL (Blue)
1 DALI 4 DALI
2 DALI 5 DALI
DALI IN/OUT CONNECTION
Mains connector Class-I Mains connector Class-II
LLINE
(Brown) 1LINE (Brown)
GROUND
(Yellow &
Green)
2 -
NNEUTRAL
(Blue) 3NEUTRAL (Blue)
1 - 4 -
2 - 5 -
Secondary connector Class-I Secondary connector Class-II
2 DALI 2 DALI
3 DALI 3 DALI
DALI IN/OUT
8/20

CITYTOUCH CONNECTION
Ø1014 mm 24 mm2
OPEN MAINS CONNECTOR
CLOSE MAINS CONNECTOR
CITYTOUCH CONNECTION
Mains connector Class-I Mains connector Class-II
LLINE
(Brown) 1LINE (Brown)
GROUND
(Yellow &
Green)
2 -
NNEUTRAL
(Blue) 3NEUTRAL (Blue)
1 DALI 4 DALI
2 DALI 5 DALI
The connectors are not for current
interruption.
Never connect or disconnect under
load
WIRE CONNECTION TO WIELAND
1
5
26
9/20

10 KV PROTECTION
10A max.
10/20