Philips HR 7753/01 User manual

ServiceManual
Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
Essence Foodprocessor
HR 7753/01
PRODUCT INFORMATION:
The Foodprocessor is equipped with mechanical and
thermal safety switches.
TECHNICAL DATA:
Motor : universal, radio / TV interference
suppressed
Power consumption : 800 Watt max.
Voltage & frequency : 230 V, 50 Hz
Cordset : 100 cm, double insulated with
moulded on plug
Speed setting : 2 speeds + pulse
Bowl capacity : 2.5 L dry ingredients, 1.7 L liquids
Blender capacity : total jar capacity 2.0 L,
1.5 L effective
Speeds unloaded : blender drive shaft 19500 rpm (max)
accessories drive shaft 2150 rpm
(max at speed 2 + pulse)
accessories drive shaft 1700 rpm
(min at speed 1)
Weight in fancy box : 6.266 g
Dimensions
fancy box (l x w x h) : 390 mm x 290 mm x 400 mm
4322 277 01000
02/08
SAFETY:
Automatically resettable : protects motor against overheating
thermal cut out
Built – in safety lock : detects wheter lid & bowl are
assembled
Motor brake system : stops the appliance wthin
1.5 seconds
COLOURS:
White with Vapor Dusk accents, clear transparant bowl & jar
MATERIALS USED:
- Bowl, bowl lid, blender jar & safety cover, : SAN
JE lid
- Housing, screw cap, blender lid, pusher, : PP
inlay bowl handle
- Juice extractor (sieve, pusher), : PP
citrus press (sieve & cone)
- Kneading accessory : PP / 30% chalk
- Balloon beater : POM
- Insert holder, handgrip blender jar : ABS
- Adjustable slicing disc : POM, ABS,
stainless steel
This product meets the requirements regard-
ing interference suppression on radio and TV.
After the product has been repaired, it should
function properly and has to meet the safety
requirements as officially laid down at this
moment.

Pos. Description Service Code
35 Closed bowl 4203 065 63780
39 Insert granulating 4203 065 61570
40 Insert shredding fine 4203 065 61550
42 Insert shredding medium 4203 065 61560
43 Insert shredding coarse 4203 065 62310
44 Insert holder 4203 065 61520
45 Adjustable slicing disc 4203 065 63670
46 Plastic kneader 4203 065 63970
47 Metal knife 4203 065 63690
48 Emulsifing disc 4203 065 63660
49 Toolholder 4203 605 63680
50 Ballon beater assy 4203 065 61350
51 Gear wheel 4203 065 61360
55 Blender safety lid 4203 065 63650
56 Blender lid 4203 065 63640
57 Blender jar 4203 065 63630
60 Juice extractor pusher 4203 065 63820
61 Juice extractor lid 4203 065 63830
62 Juice extractor lid bearing 4203 065 63840
63 Juice extractor sieve 4203 065 63850
64 Juice extractor shredding piece 4203 065 63860
70 Potato knife 4203 065 61830
A Wire connector for 2 wires 4203 065 63190
PARTS LIST HR 7753/01
Pos. Description Service Code
1 Blender cover 4203 065 63470
2 Screw cap 4203 065 63620
3 Top housing 4203 065 63480
4 Switch assy 4203 065 60630
6 Housing parts 4203 065 63490
7 Safety switch lever 4203 065 63580
8 PCB brake 4203 065 63510
10 Blender coupling 4203 065 63570
11 Motor assy - 230V 4203 065 63930
12 Motor coupling assy 4203 065 63590
13 Mounting plate 4203 065 63600
14 Adjusting piece 4203 065 63540
15 Motor screw 4203 065 60310
16 Tooth belt 4203 065 60440
17 Belt wheel 4203 065 63560
18 Single speed gear 4203 065 63610
19 Cordset EURO 4203 065 63980
Cordset UK 4203 065 63990
Cordset SWISS 4203 065 64010
30 Press cone 4203 065 64030
31 Sieve 4203 065 63870
32 Pusher closed bowl 4203 065 63800
33 Bowl lid 4203 065 63760
34 Lid bearing 4203 065 63770
SERVICE INFORMATION :
- The blender coupling on the motor shaft has been provided
with a customary left-handed thread.
The drive coupling (item 10) can be detached by means of
a hammer and a screwdriver. Strike the screwdriver with a
short sharp blow and remove the drive coupling, or block
the acc. drive wheel (item 17) and thereby the rotor shaft,
by sticking a pin through the hole (5 mm dia. – marked with
an arrow) in the bottom plate.
- The assembly of the accessories depends on the national
version.
- For specific versions, the component configuration may
differ from the one shown on the exploded view.
However, the actual components can be distinguished by
their code numbers.
- Make sure that all functions, including the safety devices,
are working correctly after you have completed the repair.
Automatic resettable cut-out (part of item 11)
To prevent damage due to overheating, the appliance has
been equipped with an automatic cut-out system.
This system will automatically cut off the power supply when
the appliance overheats.
If the appliance suddenly stops running:
- Unplug the appliance
- Switch off the appliance
- Let the appliance cool down for 15 minutes
- Plug the appliance in again
- Switch the appliance on again
Safety lock (item 7)
Place the lid on the bowl in the right position. The appliance
will only function if the line on the applinace is directly
opposite the mark on the lid of the food processor bowl and
the same holds for the other accessoires. The built-in safety
lock will now be deblocked and you can turn the appliance on.
Note that if both the blender jar and the bowl have been
correctly mounted, only the blender will function.
Important:
If the appliance is used without the blender jar, the appliance
will not function, when the blender coupling (item 10) has not
been protected by the blender cover (item 1).
Note:
The blender cover can only be removed, when the bowl
including the bowl lid is not mounted on the foodprocessor.
How to set the belt tension:
Step 1: Give 30 N pretension force on the adjusting plate to
minimise the distances between the belt and the belt
wheels
Step 2: Reduce the tension force from 30 N down to 10 N
which is the required belt drive force for the appliance.
Step 3: Fix the adjusting screw on the adjusting plate when
the tension force reaches the value of 10 N (after
coming down from 30 N!)
MAINS R1
R2
C1
D1
U
Change-over switch
in braking position
1
2
Pred
brown
yellow
blue
blue
brown
yellow
white
red
S1
S2
black
F1
F2
OFF
Rotor

2
1
6
4
8
3
7
A

DAP2285
10
15
13
11
12
18
19
14
16
17
A

DAP2624
32
31
30
35
33
34
46
44
43
42
39
40
45
48
49
47
50 51
57
56
55
64
63
61
62
60
70