Philips HP4898/00 User manual

Powerprotect ION
HP4898/01

2

3

4

ENGLISH 6
DEUTSCH 17
FRANÇAIS 29
NEDERLANDS 41
ESPAÑOL 53
ITALIANO 65
PORTUGUÊS 77
TÜRKÇE 88
HP4898/01
5

Introduction
The Philips Powerprotect ION has been specially
designed to meet your personal needs, giving you
frizz-free, beautiful and shiny hair.The ioniser
inside the hairdryer emits negatively charged ions
that surround your hair. Negative ions reduce the
build-up of static electricity and help to keep your
hair in good condition, making it frizz-free and
smooth.
Scientific tests have shown that drying at a too
high temperature can lead to overdrying. Hair
that has been overdried, feels coarse and looks
dull and frizzy.Whereas normal hairdryers can
heat up the hair to very high temperatures
(approx. 80cC), the Powerprotect ION features
the Powerprotect System.This system offers
gentle drying at a lower and caring temperature
of 57cC, reducing the risk of overheating the hair.
Combined with an ultra-strong airflow, the system
dries your hair ultra-quickly, giving it the lustre,
body and richness you love.
For more information on this hairdryer or any
other Philips beauty product, visit our website:
www.philips.com/beauty.
General description (fig. 1)
AAir inlet grille
BRocker switch for temperature settings
-‡Quick-Dry setting
-·Protect setting
-—Cool setting
ENGLISH6

CAirflow and on/off slide
- O = off
- I = Low airflow especially intended for
styling
- II = Medium airflow for drying and styling
- III = Ultra-strong airflow for fast drying
DHanging loop
EVolume diffuser
FConcentrator
GIon generator
HProfessional haircare set
- Round brush
-Comb
- Hairclips
- Pouch
Important
Read these instructions for use carefully before
using the appliance and save them for future
reference.
◗Check if the voltage indicated on the
appliance corresponds to the local mains
voltage before you connect the appliance.
◗Check the condition of the mains cord
regularly. Do not use the appliance if the plug,
the cord or the appliance itself is damaged.
◗If the mains cord is damaged, it must be
replaced by Philips, a service centre
authorised by Philips or similarly qualified
persons in order to avoid a hazard.
◗Keep this appliance away from water! Do not
use this product near or over water
ENGLISH 7

contained in baths, washbasins, sinks etc.
When used in a bathroom, unplug the
appliance after use since the proximity of
water presents a risk, even when the
hairdryer is switched off.
◗For additional protection, we advise you to
install a residual current device (RCD) with a
rated residual operating current not
exceeding 30mA in the electrical circuit
supplying the bathroom.Ask your installer for
advice.
◗Keep the appliance out of the reach of
children.
◗Never block the air grilles.
◗If the appliance overheats, it will switch off
automatically. Unplug the appliance and let it
cool down for a few minutes. Before you
switch the appliance on again, check the grilles
to make sure they are not blocked by fluff,
hair, etc.
◗Always switch the appliance off before putting
it down, even if it is only for a moment.
◗Always unplug the appliance after use.
◗Do not wind the mains cord round the
appliance.
◗You may notice a characteristic odour when
using this hairdryer.This is caused by the ions
that are generated and it is not harmful to the
human body.
◗Do not probe the ion generator with metal
objects.
ENGLISH8

Using the appliance
Drying
1Put the plug in the wall socket.
C2Switch the appliance on by selecting the
desired setting:
O=Off
I = Low airflow especially intended for styling
II = Medium airflow for drying and styling
III = Ultra-strong airflow for fast drying
The ions will be generated automatically.
3Select the desired temperature setting by
pressing the rocker switch.
The Quick-Dry setting
C◗‡The Quick-Dry setting enables you to dry
shower-wet hair very quickly.
It is recommended to use the Quick-Dry setting
only on shower-wet hair and to select the Protect
setting when the hair is almost dry in order to
reduce the risk of overdrying.
The Protect setting
C◗·The Protect setting gently dries the hair at
a caring temperature of 57cC.
ENGLISH 9

The Cool setting
C◗—The Cool setting fixes the style you have
created.
For long-lasting styling results, set the rocker
switch to the Cool setting and direct the cool
airflow at your hair to fix your style.
C4Dry your hair by making brushing
movements with the hairdryer at a small
distance from the hair.
5Select the highest airflow speed (III) in
combination with the Quick-Dry or
Protect setting for ultra-quick drying.
6Select a lower airflow speed (I-II) for
drying short hair or styling your hair.
Attachments
Concentrator
The concentrator enables you to direct the
airflow straight at the brush or comb with which
you are styling your hair.
C1Connect the concentrator by simply
snapping it onto the appliance. Disconnect
it by pulling it off.
2Switch the appliance on by setting the
airflow slide to position I, II or III.
ENGLISH10