Philips HP8235 User manual

© 2021 Koninklijke Philips N.V.
保留所有权利
3140.035.3217.5 ( 06/09/2021 )
EN User manual ZH-CN 用户手册
e
g
f
b
a
c
d
h
i
English
Congratulations on your purchase, and welcome to Philips! To
fully benet from the support that Philips oers, register your
product at www.philips.com.cn/welcome.
1 Important
Read this user manual carefully before you use the appliance
and keep it for future reference.
• WARNING: Do not use this appliance near water.
• When the appliance is used in a bathroom, unplug it after
use since the proximity of water presents a risk, even when
the appliance is switched o.
• WARNING: Do not use this appliance near
bathtubs, showers, basins or other vessels
containing water.
• Always unplug the appliance after use.
• If the appliance overheats, it switches o automatically.
Unplug the appliance and let it cool down for a few minutes.
Before you switch the appliance on again, check the grilles
to make sure they are not blocked by u, hair, etc.
• If the mains cord is damaged, you must have it replaced
by , a service centre or similarly qualied persons in order to
avoid a hazard.
• This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
• For additional protection, we advise you to install a residual
current device (RCD) in the electrical circuit that supplies the
bathroom. This RCD must have a rated residual operating
current not higher than 30mA. Ask your installer for advice.
• Do not insert metal objects into the air grilles to avoid
electric shock.
• Never block the air grilles.
• Before you connect the appliance, ensure that the voltage
indicated on the appliance corresponds to the local power
voltage.
• Do not use the appliance for any other purpose than
described in this manual.
• Do not use the appliance on articial hair.
• When the appliance is connected to the power, never leave
it unattended.
• Never use any accessories or parts from other manufacturers
or that Philips does not specically recommend. If you use
such accessories or parts, your guarantee becomes invalid.
• Do not wind the mains cord round the appliance.
• Wait until the appliance has cooled down before you store it.
Electromagnetic elds (EMF)
This Philips appliance complies with all applicable standards
and regulations regarding exposure to electromagnetic elds.
Recycling
- Do not throw away the product with the
normal household waste at the end of its life,
but hand it in at an ocial collection point for
recycling. By doing this, you help to preserve the environment.
- Follow your country’s rules for the separate collection of
electrical and electronic products. Correct disposal helps
prevent negative consequences for the environment and
human health.
2 Dry your hair
1 Connect the plug to a power supply socket.
2 Adjust the airow switch ( ) to for gentle airow and
styling, or for strong airow and fast drying.
Tip: You can also use the turbo button ( ) for extra powerful
airow.
You can use the speed setting for a more convenient quiet
drying.
3 Adjust the temperature switch ( ) to for hot airow,
for warm airow, or for eciently drying your hair at a
constant caring temperature. Press the Cool shot button ( )
for cool airow to x your style.
The appliance with ionic function provides additional shine and
reduces frizz.
4 To turn the ionic function on or o, adjust the ionic slide
switch ( ) to or .
» The ionic function may produce a special odor. It is normal
and caused by the ions which are generated.
Nozzle
A nozzle enables you to direct the airow straight at the brush
or comb with which you are styling your hair, and to get perfect
styling results and a shiny, polished look.
• To connect the nozzle ( ), snap it onto the appliance.
• To disconnect the nozzle, pull it o the appliance.
Volume diuser
The volume diuser is specially developed to gently dry both
straight and curly or wavy hair.
The volume diuser has a unique asymmetric design that is
contoured to the head, making it easier and more intuitive to
use.
1 To connect the volume diuser ( ), snap it onto the
appliance.
To disconnect the volume diuser, pull it o the appliance.
2 To enhance your natural volume and maintain your curls,
hold the dryer vertically to dry your hair.
3 To add volume at the roots, insert the pins into your hair in
such a way that they touch your scalp.
4 Make rotating movements with the appliance to distribute
the warm air through your hair.
After use:
1 Switch o the appliance and unplug it.
2 Place it on a heat-resistant surface until it cools down.
3 Take the air inlet grille ( ) o the appliance to remove hair
and dust.
4 Rotate the air inlet grille anti-clockwise to take if o the
appliance.
5 Rotate the air inlet grille clockwise to reattach it to the
appliance.
6 Keep it in a safe and dry place, free of dust. You can also
hang it with the hanging loop ( ).
3 Guarantee and service
If you need information or if you have a problem, please visit
the Philips website at www.philips.com.cn/support or contact
the Philips Customer Care Centre in your country (you nd its
phone number in the worldwide guarantee leaet). If there
is no Consumer Care Centre in your country, go to your local
Philips dealer.
4 Troubleshooting
Problem Cause Solution
The
appliance
does not
work at
all.
The power socket
to which the
appliance has
been connected
may be broken.
Check the appliance is
plugged in correctly.
Check the fuse for this
power socket in your home.
The appliance
may have
overheated and
switched itself o.
Unplug the appliance and
let it cool down for a few
minutes. Before you switch
on the appliance again,
check the grilles to make
sure they are not blocked by
u, hair, etc.
The appliance may
not be suitable
for the voltage to
which it has been
connected.
Ensure that the voltage
indicated on the type
plate of the appliance
corresponds to the local
power voltage.
Problem Cause Solution
There is
bad smell
for the
rst-time
of use.
The smell may
come from the
new appliance.
The smell will gradually
disappear after a few uses.
Please try to dry/style your
hair in a well-ventilated
room.
There is
burning
smell
when
drying/
styling my
hair.
If there is some
dust or residue left
in the appliance,
it may be burnt
due to the high
temperature and
produce odor.
Turn o the appliance and
wait until it cools down.
Check if any residues left.
Remove the dirty stus from
the appliance and keep it
clean.
简体中文
感谢您的惠顾，欢迎光临 Philips！
为了您能充分享受 Philips 提供的支持，
请在www.philips.com.cn/welcome 注册您
的产品。
1 重要信息
使用产品之前，请仔细阅读本用户手册，
并妥善保管以供日后参考。
• 警告：请勿在靠近水的地方使用本
产品。
• 本产品在浴室内使用时，使用后拔
下插头，因为即使本产品开关断开
后，接近水仍存在危险。
• 警告：不要在盛水的浴缸、淋浴、
洗脸盆或其他器皿附近使用
本器具。
• 警告符号注释：禁止在洗澡
或淋浴时使用。
• 使用后务必拔下产品的插头。
• 如果产品过热，它将自动关闭
电源。拔掉产品插头，让其冷却几
分钟。再次启动产品之前，请检查
出风口，确保其未被绒毛、头发等
杂物堵塞。
• 如果电源软线损坏，为避免危险，
必须由制造厂或其维修部或类似专
职人员来更换。
• 本产品适合由 8 岁或以上年龄的儿
童以及肢体不健全、感觉或精神上
有障碍或缺乏相关经验和知识的人
士使用，但前提是有人对他们使用
本产品进行监督或指导，以确保他
们安全使用，并且让他们明白相关
的危害。不得让儿童玩耍本
产品。不要让儿童在无人监督的情
况下进行清洁和保养。
• 为了增加保护，建议在浴室供电的
电气回路中安装一个额定剩余工作
电流不超过 30mA 的剩余电流装
置 (RCD)。向 RCD 安装商咨询。
• 切勿将金属物体插入风口，
以免触电。
• 切勿阻塞电吹风风口。
• 连接产品之前，请确保产品上标示
的电压与当地电源电压相符。
• 请勿将本产品用于本手册中说明以
外的任何其它用途。
• 请勿对假发使用本产品。
• 当产品连接了电源时，切勿让其无
人看管。
• 切勿使用由其它制造商生产的，或
未经飞利浦特别推荐的任何附件或
部件。如果使用此类附件或部件，
您的保修将失效。
• 切勿将电源线缠绕在产品上。
• 待产品完全冷却后再存放。
电磁场(EMF)
本飞利浦产品符合所有有关暴露于电磁场
的适用标准和法规。
Key content
HP8235

ϔ৮  喟下ݖ⊓⩢䷻
ಸ  喟)1
䷊Ⴧ⩢ࢸ 喟7_
䷊Ⴧ䶾⢴ 喟)[
䷊Ⴧ䓀ڒߌ⢴ 喟8
⩌ϔᬒ᱌  喟䄤㻮ϔ৮᱙Ҁ
ϔౝ  喟పᎬ㣋
⤍⊤㏼≻➦ࡧ下ݖ⊓უᏚ⩢கᰶ䭽ڙ
ప⤍⊤ጯ▣䩴⥡ⴠጒࡧ
ڕప䶫჏᰺ߎ☚㏬喟
᱙ϔ৮ᵦᢛపᴴ(#
(#(#
ࣷ(#ݣ䕍
回收
- 弃置产品时，请不要将它与普通生
活垃圾一同丢弃，应将其交给官方
指定的回收中心。这样做有利于
环保。
- 请遵循您所在国家/地区的电器及电子
产品分类回收规定。正确弃置本产品有
助于避免对环境和人类健康造成负面
影响。
2 吹干头发
1 将插头连接至电源插座。
2 将风速开关 ( f ) 调至 可获得暖风
用于造型，调至 可获得强风用于快
速吹干。
提示：您也可以使用强风按钮 ( h ) 以获
得更强劲的风速。
您可以使用速度设置 来更加方便安静
地吹干头发。
3 将温度开关 ( g ) 调至 可获得热
风，调至 可获得暖风，或调至 可
让您以恒定的护发温度高效地吹干
头发。按冷风按钮 ( i ) 可获得冷风用
于定型。
该产品具有负离子功能，可令秀发更加闪
亮、顺滑。
4 要打开或关闭负离子功能，请将负离子
滑动开关 ( e ) 调至 或 。
» 负离子功能可能会发出一种特殊
气味。这是正常情况，是由所产生
的负离子导致的。
集风嘴
集风嘴可以将气流集中到您用于制作发型
的发梳上，为您打造闪亮完美的造型。
• 要连接集风嘴 ( c )，只需将其扣合到
产品上即可。
• 要卸下集风嘴，将其从产品上拔下
即可。
弧形扩散风嘴
弧形扩散风嘴能轻柔地吹干直发、卷发或
波浪形头发而设计。
弧形扩散风嘴采用独特的流线形设计，
贴合头部线条，使用更方便简单。
1 要连接弧形扩散风嘴 ( d )，只需将其
扣合到产品上面。
要卸下弧形扩散风嘴，将其拔出即可。
2 要增强您头发自然丰盈的效果，并保
持卷发造型，请垂直握住电吹风以吹干
头发。
3 要塑造发根蓬松的效果，可将梳齿插入
头发并触碰到头皮。
4 握住本产品做旋转运动，用暖风均匀的
吹风造型。
使用后：
1 关闭产品并拔下电源插头。
2 将产品置于隔热表面上，直至其冷却。
3 将进风口 ( b ) 从产品上卸下，清除毛
发和灰尘。
4 逆时针旋转进风口，可将其从产品上
卸下。
5 顺时针旋转进风口，可将其重新安装到
产品上。
6 将产品存放在安全、干燥、清洁的位
置。您也可以使用挂环 ( a ) 将产品挂
起存放。
3 保修与服务
如果您需要了解信息或有任
何疑问，请访问飞利浦网站
www.philips.com.cn/support。您也可以
与您所在地的飞利浦客户服务中心联系
（可从保修卡中找到其电话号码）。如果
您所在的国家/地区没有飞利浦客户服务
中心，请向当地的飞利浦经销商求助。
4 故障种类和处理方法
问题 原因 解决方法
产品完
全无法
工作。
产品所连接
的电源插座
可能已损
坏。
检查设备已正确
插入。
检查您家中电源
插座的保险丝。
产品可能过
热，因此自
动断电。
拔掉产品插头，
让其冷却几分
钟。再次打开产
品电源之前，
请检查出风口，
确保没有被绒
毛、头发等杂物
堵塞。
产品连接的
电源电压可
能与产品电
压不符。
确保产品型号铭
牌上标示的电压
与当地电源电压
相符。
首次使
用时有
异味。
气味可能来
自新产品。
使用几次后，气
味将逐渐消失。
请尝试在通风良
好的房间内吹干
头发/造型。
吹干头
发/造
型时有
烧焦的
气味。
如果产品中
残留了一些
灰尘或残留
物，则可能
会因高温而
燃烧，并产
生气味。
关闭产品电源，
等待其冷却。检
查是否有残留
物。
从产品中取出脏
物，并保持清
洁。
保留备用
出版日期： 2021-09-06
产品中有害物质的名称及含量
部件名称
有害物质
铅（Pb） 汞（Hg） 镉
（Cd）
六价铬
（Cr6+）
多溴联苯
（PBB）
多溴二苯醚
（PBDE）
电源线 XO O O O O
马达 XO O O O O
本表格依据SJ/T 11364的规定编制。 O：表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572规定的限量要求以下。 X ：表示该有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572规定的限量要求。
*该表格中所显示的“ 有害物质 ”在产品正常使用情况下不会对人身和环境产生任何伤害。 * 该表格中所显示的“ 有害物质 ”及其存在的部件向消费者和回收处理从业者提供相关物质的存在信息，有助于产品废弃时
的妥善处理。
e
g
f
b
a
c
d
h
i