Philips SHB9100WT User manual

Quick start guide
Philips Bluetooth stereo headset SHB9100WT
Pair the headset with your mobile phone
1Make sure that your mobile phone is
turned on and its Bluetooth feature is
activated.
2Make sure that the headset is charged
and turned off.
3Press and hold until the LED starts
ashing white and blue alternately.
»The headset is in pairing mode,
which lasts ve minutes.
4Pair the headset with your mobile
phone. For details, refer to the user
manual of the mobile phone.
Enter “0000” (4 zeros), if
prompted to enter the pin
code of the headset.
EN
Please refer to www.philips.com/welcome for full user manual.
Settings
Select
Back
Connectivity
10:37
Enter Password
****
0000
Settings
Bluetooth
Select Back
Connectivity
10:35
Add
Bluetooth
device
Settings
Devices Found
Select
Back
10:36
Philips SHB6000
Settings
Select
Back
Connectivity
10:37
Enter Password
****
0000
Settings
Bluetooth
Select Back
Connectivity
10:35
Add
Bluetooth
device
Settings
Devices Found
Select
Back
10:36
Philips SHB9100WT

Turn the headset on. Press and hold for more than 4 seconds
Turn the headset off. Press and hold for more than 4 seconds
Play or pause music. Press
Pick up or terminate a call. Press
Reject a call. Press and hold
Redial the last number. Press twice
Switch caller in a call. Press twice
Transfer a call to your mobile phone.
(This function is available if your mobile
phone supports this feature.)
Press and hold for more than 4 seconds
Adjust volume. Slide up / down VOL +/-
Skip forward. Press
Skip backward. Press twice
Mute/unmute the microphone in a call. Press
Activate voice dialing Press twice
Use your headset
*Available if supported by your mobile phone.
The headset is connected to a Bluetooth
device, while the headset is in standby
mode or while you are listening to music.
Blue LED ashes every 8 seconds.
The headset is ready for pairing. LED ashes whiteand blue alternately.
The headset is on but not connected to a
Bluetooth device.
Blue LED ashes fast.
There is an incoming call. Blue LED ashes twice per second.
Low battery. White LED ashes.
Battery is fully charged. White LED ashes.
The LED is off. The headset is off./Charging is nished.
The headset beeps every 5 seconds The Mic is muted.
Other status and indicators
© 2012 Koninklijke Philips Electronics N.V.All rights reserved.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
V2.0
Welcome to Philips!
For an optimal experience, register your product at
www.philips.com/welcome