Philips Energy Advantage P-6018 User manual

An energy saving solution
for government facilities
Philips Energy Advantage T8 25W Extra Long Life Lamps
featuring ALTO II™Technology

Energy savings, extra lon
life, extra low mercury,
and a 7-year warranty!*
Philips Energy Advantage T8 25W Extra Long Life Lamps featuring ALTO II™
Energy efficient lighting not only reduces operating costs;
it also supports a clean and sustainable environment
Philips Energy Advantage T8 25W Extra Long Life Lamps save up to
7 watts instantly when compared to a T8 32W lamp.
The lowest mercury levels in the industry
Philips ALTO II™Technology leads the industry with the lowest mercury
level of only 1.7mg per lamp, helping you obtain LEED-EB certification.
With just 18 Picograms per lumen hour3, these lamps allow for more
design freedom and help exceed your LEED requirements.4
ReduceYour Energy Costs
(See back page for footnotes)
Save 7 watts when you replace an existing T8 32W lamp
with an Energy AdvantageT8 25W Extra Long Life lamp
Annual operating hours
(12 hours/day) (24 hours/day)
Savings ver Lamp Life
(40,000 hrs Rated Average Life)
kWh
Rate 4380 hours18760 hours21 lamp 4 lamps
0.06 $1.84 $3.68 $16.80 $67.20
0.08 $2.45 $4.91 $22.40 $89.60
0.1 $3.07 $6.13 $28.00 $112.00
0.12 $3.68 $7.36 $33.60 $134.40
0.15 $4.60 $9.20 $42.00 $168.00
0.2 $6.13 $12.26 $56.00 $224.00

g
Technology
Superior performance, reduced maintenance—
guaranteed!
Philips Energy Advantage T8 25W Extra Long Life Lamps
are guaranteed to last 7 years*reducing maintenance costs
by extending the relamp cycle.
Rated Average Life
Philips Energy Advantage T8 25W Extra Long Life lamps
last up to 46,000 hours.
Made in USA
Philips ALTO II™T8 lamps are manufactured in one of
the world’s largest fluorescent, state-of-the-art plants
located in Salina, Kansas.
Philips Lighting North America’s manufacturing facilities,
corporate offices, and distribution centers.
rdering, Electrical and Technical Data
Color Nom. Rated Average Life (hrs)6Approx.
Product rdering Pack. Temp. Length 12-hr on 12-hr on Initial Design Lumen
Number Code Watts Qty. (Kelvin) (In.) Ins. Start Prog. Start Lumens7Lumens8CRI Maint.
15206-6 F32T8/ADV830/XLL /ALTO 25 25 3000 48 40,000 46,000 2400 2330 85 97%
15207-4 F32T8/ADV835/XLL /ALTO 25 25 3500 48 40,000 46,000 2400 2330 85 97%
15208-2 F32T8/ADV841/XLL /ALTO 25 25 4100 48 40,000 46,000 2400 2330 85 97%
15209-0 F32T8/ADV850/XLL /ALTO 25 25 5000 48 40,000 46,000 2350 2280 82 97%
E
E
E
E
TCLP
C MPLIANT
†

© 2009 Philips Lighting Company.
All rights reserved.
Printed in USA 6/09
P-6018
www.philips.com
Philips Lighting Company
200 Franklin Square Drive
P.O. Box 6800
Somerset, N 08875-6800
1-800-555-0050
A Division of Philips Electronics
North America Corporation
Philips Lighting
281 Hillmount Road
Markham, Ontario
Canada L6C 2S3
1-800-555-0050
A Division of Philips Electronics Ltd.
F TN TES:
* 7 year warranty based on burning a maximum of 4000 hours per year on a Philips Advance Optanium®ballast. See Philips for further warranty details.
1) 4380 based on operating the lamps 12 hours per day / 7 days a week.
2) 8760 based on operating the lamps 24 hours per day / 7 days a week.
3) Picogram calculation: Mercury content (mg) per lamp x 1,000,000,000 / (RAL x design lumens) = picogram per lumen hour.
4) For more information on LEED, please visit www.usgbc.org
5) Average life under specified test conditions with lamps turned off and restarted no more frequently than once every 3 operating hours. Lamp life is appreciably longer if lamps are started less frequently.
6) Average life under engineering data with lamps turned off and restarted once every 12 operating hours.
7) Approximate initial lumens.The lamp lumen output is based upon lamp performance after 100 hours of operating life, when the output is measured during operation on a reference ballast under
standard laboratory conditions. For expected lamp lumen output, commercial ballast manufacturers can advise the appropriate ballast factor for each of their ballasts when they are informed of the
designated lamp.The ballast factor is a multiplier applied to the designated lamp lumen output.
8) Design lumens are the approximate lamp lumen output at 40% of the lamp’s rated average life.This output is based upon measurements obtained during lamp operation on a reference ballast under
standard laboratory conditions.
Lamp meets US Federal Minimum Efficiency Standards.
This lamp is better for the environment because of its reduced mercury content. All Philips ALTO II™lamps give you end-of-life options which can simplify and reduce your lamp disposal costs
depending on your state and local regulations.
† Fluorescent lamps that are TCLP compliant reduce the amount of pollutants released into the environment.
E