Philips Azur GC4010 Assembly instructions

ServiceManual
Philips Domestic Appliances and Personal Care
Published by Philips Domestic Appliances and Personal Care Printed in the Netherlands © Copyright reserved Subject to modification
Steam Iron Elixir
GC 4010
Service Manual 4322 277 00471 (01/02) is herewith cancelled
PRODUCT INFORMATION
Features
- Colour white/blue
- Careeza soleplate
- Tank capacity (350 ml)
- Steam rate (40 g/min)
- Shot of steam (80 g)
- Vertical steam
- Integrated cord winder with clip
4322 277 00870
02/02
This product meets the requirement regarding
interference suppression on radio and television.
TECHNICAL INFORMATION
Voltage : 120 V, 220-240 V
Frequency : 50-60 Hz
Power consumption : 1450 W, 2200 W
Water advice : Suitable for tap water use. However if
the tap water in your area is very hard,
we advise you to mix it with an equal
portion of distilled water or to use
distilled water only.
Cleaning of the Iron : Use only the Calc clean button for
cleaning of the Iron.
Never use vinegar or other descaling
agents.
Soleplate
Careeza is a multi layer chemical substance that gives an excellent
gliding over various fabrics and better care for the garments.
Vertical Steam
When the iron is kept in a vertical position, the shot of steam
(S.O.S) button can be used to iron hanging fabrics such as curtains.
Anti drip
Water is only released to through the tank valve into the steam
chamber if the soleplate temperature is high enough to evaporate
all water. If the temperature is too low, the tank valve is closed by
means of a bi-metal disc.

DISASSEMBLY ADVICE IRON
DIAL 1
RATTLE SPRING 2
BACKPLATE 102 103
CORD SET 4
SWIVEL HOLDER 101
SWIVEL 104
Remove Screw A
Remove Screws B1, B2
FILLING DOOR 6
INLAY 7
OPERATION KNOBS 8
LAMP 9
Remove Screw A
Remove Backplate 102, 103
SLIDE UNIT 10
NEEDLE SET 11
TANK SEAL 12
HANDLE 13
SELF CLEAN
BUTTONS 14
SPRAY NOZZLE
ASSY 15
PUMP ASSY 16
Remove Screw A
Remove Backplate 102, 103
Remove Inlay 106
Remove Operation knobs
107, 108
Remove Screws C1, C2
Remove Slide Unit 114, 115
Remove Needle set
116, 117, 118
Remove Screws D1, D2
THERMOSTAT
BUSH 17
WATER TANK 18
Remove Screw A
Remove Backplate 102, 103
Remove Inlay 7
Remove Operation knobs
107, 108
Remove Screws D1, D2
Remove Handle 13
Remove Screws E1, E2
Remove Water tank 18
Remove Screw F
SOLEPLATE
COVER 19
ISOLATION PLUG 20
SOS SEAL 21
DOSING SEAL 22
SOLEPLATE ASSY 23
Remove Screw A
Remove Backplate 102, 103
Remove Inlay 7
Remove Operation knobs
107, 108
Remove Screws D1, D2
Remove Handle 13
Remove Screws E1, E2
Remove Water tank 18
Remove Screw F
Remove Heat shield
Remove Screws G1, G2
Remove Soleplate cover 19

PARTS LIST IRON
Screws : d x 1
A, B, C, D, E 3.5 x 16.5 mm
F4.0 x 9.0 mm (with washer)
G4.0 x 9.0 mm
RESISTOR
LAMP
FUSE
N
L
E
HEATING
UNIT
INPUT
THERMOSTAT
Dial
Rattle spring
Backplate 102, 103
Cordset EU 230V / 2200 W
Cordset CSA 120 V / 1450 W
Cordset UL 120V / 1450 W
Swivel 101, 104
Filling door
Inlay printed 105, 106, 109
Operation knobs 107, 108
Lamp
Slide unit 114, 115
Needle set 116, 117, 118
Tank seal
Handle unprinted
Self clean buttons 110, 111
Spray nozzle unit
Pump assy
Thermostat Bush
Water tank (blue) 113
Soleplate cover
Isolation plug
Sos seal
Dosing seal
Soleplate assy + thermostat (230 V / 2200 W) 112, 119
Soleplate assy + thermostat (120 V / 1450 W) 112, 119
Lamp holder
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
4239 021 03010
4239 014 53830
4239 022 53040
4239 000 06580
4239 021 03260
4239 000 07870
9965 000 08787
4239 021 03200
9965 000 08794
9965 000 08789
4239 021 03140
9965 000 08790
9965 000 08791
4239 015 54400
4239 021 03180
9965 000 08792
4239 021 03040
4239 020 90560
4239 015 98410
4239 022 52940
4239 026 06350 (cover sprayed)
4239 025 98250
4239 015 54410
4239 015 54390
4239 021 02050
4239 021 03270
4239 026 01220
Description Consist ofPos Service code

EXPLODED VIEW IRON
G1
G2
F
H
E1
D1
C1
C2
E2
D2 A
B1
B2
9
8
108
107
101
104
110
111
1
13
17
102
103
2
24
119
22
6
7
106
113
16
12
116
118
114
115
117
18
19
21
112
23
4
20
15
109
105
5
3
14
10
11

IMPORTANT + ADJUSTMENT AND CONTROLS
IMPORTANT
Due to high voltage of the iron, only the specified cordsets must be used.
NOTES :
1) For standardisation reasons :
Dial : With English / Spanish text only.
Rattle spring : 5 pcs will be supplied when ordered.
Type plate : No info. about the typenumber and voltage have been stamped onto the typeplate.
When replacing the typeplate, engrave at least typenumber onto the typeplate with a sharp object.
2) Parts with numbers from 100 and higher, cannot be ordered separately.
3) After the product had been repaired, it should function properly and has to meet the safety requirement and legal
regulations as laid down and officially established at this moment.
ADJUSTMENTS AND CONTROLS
Thermostat
Thermostat 119, fitted to the soleplate 23 has already been adjusted by the supplier and secured by glue.
To avoid mal-function of the iron, NEVER re-adjust the thermostat.
NOTE : the thermostat 119 can only be ordered together with the soleplate assembly 23.