Philips LX Series User manual

LX Series
HEAVY DUTY LED EXIT
Page 1 of 2
Job Information Type:
Job Name:
Cat. No.:
Notes:
Features
Illumination: Illumination
of the exit stencil face is
accomplished with either
red or green high-output
Light Emitting Diodes (LEDs).
Hot spots and striations are
eliminated by a combination
of indirect and direct aiming
points covering the exit stencil
face.
Housing: Constructed of
three-piece, 20 gauge, cold
rolled steel. White powder
coat finish is standard, black
is optional. NFPA-compliant
field-selectable chevrons. UL
damp location listing is available
on the AC Only version.
Universal knockouts located
on the backplate allow for wall
mounting directly to standard
junction boxes. A mounting
canopy is provided for top and
end mount applications.
Operating Temperature
Range: Standard Location
65°F (19°C) to 85°F (30°C)
Damp Location
50°F (10°C) to 104°F (40°C)
Electronics: AC Only -
120/277 VAC dual voltage
input.
Self-Powered - 120/277 VAC
dual voltage input with surge-
protection, solid-state circuitry
provides for a reliable charging
system. Charging system is
complete with low voltage
disconnect, AC lockout,
brownout protection, AC
indicator lamp and test switch.
Electrical Specifications:
AC Only Red:
0.030 A (120 VAC)
0.013 A (277 VAC)
AC Only Green:
0.035 A (120 VAC)
0.015 A (277 VAC)
Self-Powered Red:
0.037 A (120 VAC)
0.016 A (277 VAC)
Self-Powered Green:
0.037 A (120 VAC)
0.016 A (277 VAC)
Code Compliance
UL 924 listed. Optional UL
damp location (AC only
versions) listed. NFPA 101,
NEC, BOCA, OSHA and IBC
illumination standards.
Warranty
Three year full electronics
warranty. Five year full,
five year prorated battery
warranty.
12.5"
(31.8 cm)
LXN1RW
7.8 "
(19.9 cm)
6.8"
(17.3 cm)
2.0"
(5.1 cm)
4.8"
(12.2 cm)
2.5"
(6.4 cm)

LX Series
HEAVY DUTY LED EXIT
Page 2 of 2
Philips Lightolier
e: [email protected]
t: [phone]
w: www.lightolier.com
LX Series August 12, 2011
Specifications are subject to change without notice.
© Koninklijke Philips Electronics N.V., 2011.All rights reserved.
Job Information Type:
Ordering Information
Series
LX = LX Series
Heavy Duty Steel
LED Exit
A= AC Only
N= Nickel Cadmium
Battery
B= Black
W= White
Housing Color
LX
1= Single
2= Double
# of Faces
R= Red
G= Green
Letter Color
Accessories (order as a separate item)
XCKITW = Canopy Kit, White
DCKCE06 = DC Conversion Kit, 6 VDC, 5.4 W lamps
DCKCE22 = DC Conversion Kit, 12 VDC, 5.5 W lamps
XPKIT12W = Pendant Kit, 12”, White Finish
WG4 = Wire Guard for Exit Wall Mounting
WG10 = Wire Guard for Exit End Mounting
2CKT1 = 120 VAC Two Circuit Wiring
2CKT2 = 277 VAC Two Circuit Wiring
BF = Buzzer/Flasher (emergency units only)
BZ = Buzzer (emergency units only)
EX = Special Input Transformer (specify voltage
and frequency)
FA = 24 VDC Fire Alarm Interface
FL = Emergency Flasher
SW = Special Wording (consult factory)
Z= UL Damp Location Listing (AC only)
Factory Installed Options1
Note
1) Some option combinations may impact UL listing. Consult factory for specifics.