This portable DVD player is designed with a
built-in Ni-MH battery to supply power to the
player when you are on travel.
1Slide the POWER switch to the OFF
position (charging of the DVD player only
possible in the power-off mode).
2Connect the supplied power adaptor cord (or
the car adaptor) to the player and AC mains
(or the car cigarette lighter outlet) to start
charging.
➜The CHG indicator turns red .
➜When the battery is fully charged, the
indicator turns off.
3Disconnect the power adaptor cord (or the
car adaptor) when the CHG indicator turns
off.
Note:
– You can also connect the supplied power adaptor
cord (or the car adaptor) to the player and AC mains
(or the car cigarette lighter outlet) directly wherever
possible.
Charge your battery
1
Quick start guide
Philips Portable DVD Player PET714
3OPEN HERE
PET714
1Open the lid of the player.
2Slide the POWER switch to ON to switch
on the DVD player.
➜The POWER indicator turns on.
3Press OPEN to open the disc door.
4Remove the protective card (if any) and load a
disc with the label side facing up.
5Close the disc door. Playback will start
automatically. If not, press 2;.
6To stop playback, press 9.
2Enjoy (Disc operation)
Note:
– Once the battery is fully discharged, immediately recharge
it (regardless of whether you plan to use the battery or not)
in order to maximize the battery life.When the power is low,
the battery icon will be shown on the upper-left corner of
the TFT for warning.
2Enjoy (AV OUT)
Connecting additional equipment (TV
for example)
1Connect the AV OUT socket on the set to the
video and audio sockets on a TV as shown
directly.
2Switch on the TV and set to the correct
video-in channel.
➜You can consult the owner's manual of
your TV. (If your TV does not have Audio and
Video inputs, you will need to purchase a RF
modulator. Please consult your dealer.)
Printed in China WK742
