Philips PET727 User manual

Philips Portable DVD Player PET727
Quick Start Guide
1Charge the built-in battery
1Switch the ON/OFF slide selector to the OFF position.
2Connect the supplied AC adaptor to the DC IN 12V socket on the
DVD Player and to the AC outlet.
The red charge indicator turns on. It takes about 4 hours to fully

charge the battery.
When the battery is fully charged, the red charge indicator turns off.

Tip
– You can only charge the battery when the temperature is between 0°C
and 35°C.
– When headphones are connected to the DVD Player, the fully charged
battery lasts about 2.5 hours.
2Install remote control battery
1Open the battery compartment.
2 Insert 1 CR2025 battery with correct polarity (+/-) as indicated.
3Close the battery compartment.
CR2025
1
CR2025
2
3Play discs
1Lift the display panel.
2Switch the OPEN slide selector to the right to open the disc
compartment.
• (For the first time) Remove the protective card.
3Insert a disc with the printed side facing up.
4Push the lid down to close the disc compartment.
Disc starts to play automatically. If not, press
OK or 2; .
If a menu appears, select an item and then press
OK to start play.
4Connect a TV
On the DVD Player,
1Connect the black end of the supplied AV cable to the AV OUT
socket.
On the TV,
1Connect the white end to the left audio input socket and the red
end to the right audio input socket.
2Connect the yellow end to the video input socket.
TV
AUDIO IN
VIDEO IN
English
PET727_58_QSG_V1.0
PET 727_94_QSG_EN.indd 1PET 727_94_QSG_EN.indd 1 2009-9-17 20:19:492009-9-17 20:19:49