Philips PET988/12 User manual

Note:
You can:
– Press RELEASE PANEL on the
right side of the player to slide the
panel up.
– Press the top of the panel to slide
the panel down.
– Adjust the viewing angle as shown.
AV OUT
TV
AV OUT
1Connect the AC power
adaptor to the player
and to the AC outet.
2Slide the POWER
switch to ON to switch
on the player.
Turn on
1
Quick start guide
Philips Portable DVD Player PET988
POWER
DC IN ... 9V
1Push OPEN DVD DOOR to open the
disc compartment.
3Enjoy (Disc operation)
2Switch on the TV and set to the correct
video-in channel.
➜You can consult the owner's manual of
your TV. (If your TV does not have Audio
and Video inputs, you will need to
purchase a RF modulator. Please consult
your dealer.)
Printed in China WK0839
White
Red
Yellow
(Not
supplied)
2Set clock
1Press Settings for the setup menu.
2Select Clock and press 4.
3Select Set Time and press §to set time.
4Press OK to confirm.
5Select Set Date and press §to set date.
6Press OK to confirm.
4Enjoy (USB/SD)
1Insert a USB or SD card into the USB or SD
slot on the player.
2Press Home to select switch to SD or USB
mode.
3Play video/audio/picture files stored in the
USB or SD card.
Note:
– You need set clock again if you disconnect the
power adaptor from the AC outlet.
5Enjoy (AV OUT)
Connecting additional equipment (TV
for example)
1Connect the AV OUT socket on the player
to the video and audio sockets on a TV as
shown directly.
2Remove the protective card (if any) and load
a disc with the label side facing up.
3Close the disc compartment.
4Press Home to select switch to DVD mode.
➜Playback will start automatically. If not,
press 2;.
5To stop playback, press 9.
6Display clock
When watching DVD, listening to music or
viewing photos, press 2;;the set will enter
CLOCK mode automatically in about 30
seconds.
PET988_Eng_QSG.qxd 2008.9.23 14:26 Page 1