Philips SoundShooter SBA3005P User manual

User manual
Question?
Contact
Philips
SBA3005P
Always there to help you
Register your product and get support at
www.philips.com/support

1 Important
Safety
Important Safety Instructions
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers,
stoves, or other devices (including ampliers) that produce heat.
• Only use attachments/accessories specied by the manufacturer.
• Refer all servicing to qualied service personnel. Servicing is required
when the device has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen
into the device, the device has been exposed to rain or moisture,
does not operate normally, or has been dropped.
• The battery shall not be exposed to excessive heat such as sunshine,
re, or the like.
• Devices shall not be exposed to dripping or splashing.
• Do not place any sources of danger on the device (e.g. liquid lled
objects, lighted candles).
Warning
• Never remove the casing of this apparatus.
• Never place this apparatus on other electrical equipment.

Notice
Any changes or modications made to this device that are not expressly
approved by WOOX Innovations may void the user’s authority to
operate the equipment.
This product complies with the radio interference
requirements of the European Community.
Disposal of your old product and battery
Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused
This symbol on a product means that the product is covered by
European Directive 2012/19/EU.
This symbol means that the product contains a built-in
rechargeable battery covered by European Directive 2013/56/
EU which cannot be disposed of with normal household
waste. We strongly advise you to take your product to an
ofcial collection point or a Philips service centre to have a
professional remove the rechargeable battery.
Inform yourself about the local separate collection system for
electrical and electronic products and rechargeable batteries. Follow
local rules and never dispose of the product and rechargeable batteries
with normal household waste. Correct disposal of old products and
rechargeable batteries helps prevent negative consequences for the
environment and human health.
Always bring your product to a professional to remove the built-in battery.
()
Environmental information
All unnecessary packaging has been omitted.We have tried to make
the packaging easy to separate into three materials: cardboard (box),
polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.)

Your system consists of materials which can be recycled and reused
if disassembled by a specialized company. Please observe the local
regulations regarding the disposal of packaging materials, exhausted
batteries and old equipment.
2 Get started
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number
of this apparatus.The model number and serial number are on the
bottom of the apparatus.Write the numbers here:
Model No. __________________________
Serial No. ___________________________
Power supply
The speaker can operate on built-in rechargeable battery.
To recharge the built-in battery: ()
Connect your speaker with PC through supplied USB cable.
» The power indicator turns on.
• The power indicator turns off when it’s fully charged.
Play
1 Pull the audio input plug out of the speaker. ( )
2 Slide the switch to turn the speaker on.
» The LED lights up.
3 Connect the speaker to your device with the audio input plug. ()
4 Adjust the volume and navigate your audio content on your device.
5 After use,disconnect your device from the speaker and slide the
switch to turn the speaker off.

3 Product information
Specications
General information
Rated Output Power 2W RMS
DC power input USB 5V 500mA
Built-in Li-Polymer battery 3.7V 500mAh
Battery working time >8 hours
Dimensions-Main Unit(diameter
x height)
D56mm * H80mm
Weight- Main Unit 0.2 kg
4 Troubleshooting
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the
following points before requesting service. If the problem remains
unsolved, go to the Philips web site (www.philips.com/support). When
you contact Philips, ensure that the apparatus is nearby and the model
number and serial number are available.
No power: Recharge your speaker.
No sound: Adjust volume on your device.
No response from the speaker: Restart the speaker.