Philips CDR 800/17 User manual

Philips Audio CD Recorder CDR 800: Getting started…
English
IN OUT
L
R
CDR/TAPE
AMPLIFIER/
RECEIVER
OUT
DIGITAL
DIGITAL COAXIAL SOURCE
(CD player, DVD, DAT)
IN
L
R
ANALOG
CD RECORDER
OUT
L
R
PHONO
RECORD PLAYER
OUT
L
R
ANALOG
OPTICAL
IN
IN OUT
DIGITAL
IN OUT
L
R
ANALOG
IN
L
R
PHONO
AC MAINS
Demo mode
The demo mode displays various features of the set and will start automatically.
0To switch off the demo mode keep STOP 9 pressed for at least 5 seconds.
➜The demo mode is cancelled permanently.
General information
This Quick Installation Card gives a rough
overview and helps to quickly start with basic
steps. Please read the supplied instruction
manual for detailed information.
Power
1Check whether the power voltage as shown on the
type plate corresponds to your local power voltage. If
it does not consult your dealer or service
organization.
2After all connections have been made connect
the power cord to AC MAINS ~ and to the wall
outlet.This switches on the AC power supply.
To disconnect the set from the power
completely, remove the power plug from the wall
outlet.
Discs for recording
Use discs with the “Digital Audio” logo only:
– CD-Audio Recordable (CDR) discs, or
– CD-Audio ReWriteable (CDRW) discs.
Do not use computer CDR(W)s as
recording would not work properly.
Discs for playback
Note: MP3 playback works only if the filenames end
with “.mp3”.
ReWritable
playback standard CDRW Philips
in: CD player compatible CDR 800
disc: CD player
finalized CDR ●● ●
finalized CDRW ●●
unfinalized CDR ●
or CDRW
CD Recorder only
MP3 CD ●
xp QRC CDR 800/17 eng.1 02-08-2001 12:55 Pagina 1

Philips Audio CD Recorder CDR 800: Getting started…
English
3103 306 1824 2 Printed in Hungary Cmm/RR/0130
Recording an entire CD
CD 3
CD 2
CD 1
OPEN
CLOSE
PLAY/PAUSE
2/ ;
1Press OPEN·CLOSE and insert a CD
into a tray. Close the drawer by pressing
OPEN·CLOSE again.
3Press PLAY/PAUSE 2/;
to start playback.
CDRECORDER
OPEN
CLOSE
CD 3
CD 2
CD 1
OPEN
CLOSE YES
ENTER
COPY CD
CDRECORDER
RECORD
OPEN
CLOSE
CD 3
CD 2
CD 1
OPEN
CLOSE
56
¡™
0
E
A
S
Y
J
O
G
YES
ENTER
Recording a single track
2Select the tray
by pressing CD1,
CD2 or CD3.
Playing a CD in the CD changer
Finalizing manually
FINALIZE CD
OPEN
CLOSE YES
ENTER
1Insert the CDR(W)
to be finalized into
the CD recorder.
2Press
FINALIZE CD .
3PressYES to start
the finalization.
1Insert an Audio
CDR(W) into the
CD recorder tray.
3Select a track by
rotating
¡EASY JOG
™ .
4Press
RECORD.
5PressYES to
start recording.
2Insert a CD into the
CD changer and
select the CD tray.
2Insert the CD to be
copied into the
CD changer and
select the CD tray.
1Press OPEN·CLOSE and
insert a blank Audio CDR(W) into
the CD recorder tray.
3Press
COPY CD.
4PressYES to start
CD recording.
The CD will be
finalized automatically.
xp QRC CDR 800/17 eng.1 02-08-2001 12:55 Pagina 2