Philips CDR770 User manual

Audio CD Recorder
CDR770/771
•Instructions for use
•Mode d'emploi
•Instrucciones de manejo
•Bedienungsanleitung
•Gebruiksaanwijzing
•Istruzioni per l'uso
•Brugsanvisning
•Bruksanvisning
•Käyttöohje
•Manual de utilização
•O‰ËÁ›Â˜ ¯Ú‹Ûˆ˜O‰ËÁ›Â˜ ¯Ú‹Ûˆ˜
•Instructions for use
•Mode d'emploi
•Instrucciones de manejo
•Bedienungsanleitung
•Gebruiksaanwijzing
•Istruzioni per l'uso
•Brugsanvisning
•Bruksanvisning
•Käyttöohje
•Manual de utilização
•
•
AUDIO CD RECORDABLE/REWRITABLE
OPEN / CLOSE
PLAY / PAUSE STOP
PHONES INFRA RED
EASY JOG
CDR77X AUDIO CD RECORDER
STORE/
MENU
REC
TYPE
REM TRACKRECORD TIME
DIGITAL
OPTICAL
ANALOG
PROGRAM
SHUFFLE
REPEAT
SCAN
1
1
CD
RW
SYNC MANUAL
REMTOTAL
LEVEL
ALL
TRACK
TEXT TIME STEP
TRACK
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Recordable
ON / OFF
SHUFFLE
SCROLLPROGRAM
REPEAT
PHONES INFRA RED
EASY JOG STORE/
MENU
OPEN / CLOSE
PLAY / PAUSE STOP
SOURCE
ERASEFINALIZE
OPEN / CLOSE
PLAY / PAUSE STOP
SOURCE
ERASEFINALIZE
AUDIO CD RECORDABLE/REWRITABLE
AUDIO CD RECORDABLE/REWRITABLE
DISPLAY
ENTER
CANCEL/
DELETE
SCROLLPROGRAM EASY JOG STORE/
MENU CANCEL/
DELETE
RECORD

English
8
1ON/OFF ........................turns the CD recorder ON and OFF
2Standby indicator
3Disc tray
4OPEN/CLOSE /..........opens/closes disc tray
5PLAY/PAUSE 2; ......starts play/interrupts play or
recording
6STOP 9........................stops/clears a program
7REC(ord) TYPE ............selects recording modes
8RECORD ......................starts recording, finalizing, erasing
9FINALIZE ....................selects finalize mode
0ERASE..........................selects erasing mode (disc or track)
!SOURCE ......................selects input source
@DISPLAY......................selects display information,
permanent text scrolling and time
#Display..........................information screen
$SHUFFLE......................plays CD(RW) or program in
random order
%PROGRAM ..................opens/closes program memory
^SCROLL........................activates scrolling of text over the
display (once)
&REPEAT........................repeats play (all, program or track)
*Q............................- searches backward
- cursor control in Menu/Prog.
review mode
(R............................- searches forward
- cursor control in Menu/Prog.
review mode
)¡EASY JOG ™........- previous/next track (Play and
(rotate) Program mode)
- recording level control (recording)
- selects settings (menu on)
ENTER (push) ..............- plays selected tracks
- selects settings in Menu mode
- programs track numbers
¡STORE/MENU ............- enters Menu mode
- stores Menu settings
™CANCEL/DELETE ......- deletes tracks from a program
- deletes text in Menu mode
- returns to a higher level in the
menu
£PHONES......................socket for headphones
≤IR sensor ....................receives signals from the remote
control
Note: Unless stated otherwise, all controls are on the front of
the CD recorder. When provided on the remote control,
you can also use the corresponding buttons, after
selecting the CD recorder or separate CD player by
pressing CDR or CD.
1Connection to mains
2ANALOG IN ................connects to the line output of an
amplifier (left and right)
3ANALOG OUT CDR ....connects to the line input of an
amplifier (left and right)
4DIGITAL IN..................connects to the digital coaxial
output of an external CD player
5DIGITAL OUT CDR ....connects to the digital coaxial
input of e.g. amplifier or recording
device
6OPTICAL IN ................connects to the digital optical
output of an external CD player
Connections at the back
Controls on the front
CONTROLS AND CONNECTIONS
AUDIO CD RECORDABLE/REWRITABLE
OPEN / CLOSE
PLAY/ PAUSE STOP
PHONES INFRA RED
EASY JOG
AUDIO CD RECORDABLE/REWRITABLE CDR77X
STORE/
MENU
REC
TYPE
Recordable
ON / OFF
SHUFFLE
SCROLLPROGRAM
REPEAT
PHONES INFRA RED
EASY JOG STORE/
MENU
OPEN / CLOSE
PLAY/ PAUSE STOP
SOURCE
ERASEFINALIZE
AUDIO CD RECORDABLE/REWRITABLE
DISPLAY
ENTER
CANCEL/
DELETE
RECORD
REM TRACKTIME
DIGITAL
OPTICAL
ANALOG
PROGRAM
SHUFFLE
REPEAT
SCAN
1
1
CD
RW
SYNC MANUAL
REMTOTALLEVEL
ALL
TRACK
TEXT TIME STEP
TRACK
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 +
RECORD
DIGITAL
IN OUT
OPTICAL
IN
ANALOG
IN
L
R
L
R
OUT
CDR
1 65
4
32
17 18 19 20 21 22 23 244 65 9 10 11 12 13 14 15 167 8
1
2
3

English
11
For recording the following inputs are present:
- Digital optical input.
- Digital coaxial input.
- Analog input.
For playback the following outputs are present:
- Digital coaxial output.
- Analog output.
We advise you to connect these to the CD input on your
amplifier.
The connections you make will depend upon the possibilities
your audio equipment offers. Please refer to the user manuals
for your other audio equipment first.
Digital recordings (optical or coaxial) give the best
performance in audio and usability (e.g. auto-track).
(The digital optical connection is less sensitive to external
disturbances).
If your equipment does not offer digital connections, the high
quality Analog-Digital-Convertor of your CD recorder will
ensure very good audio performance when recordings are
made from the analog input.
Playback via the digital coaxial output of the CD recorder
gives the best audio performance.
If your equipment does not offer digital connections, the high
quality Digital-Analog-Convertor of the CD recorder ensures a
very good sound quality via the analog output.
We advise you to always establish both digital and analog
connections. In this way you can always make analog
recordings when digital recording is not possible.
We have described the most common ways of connecting the
CD recorder. If you still have difficulties with the connections
you can always contact the Philips Consumer Service desk in
your country.
Analog connection is required for playback of CDs (use cable
2) and for recording from external analog sources
(use cable 1).
Use the audio cables supplied. Connect the red plugs to the
R sockets, and the white plugs to the L sockets.
1For recording, connect cable 1between the ANALOG IN-
sockets on the CD recorder and the CDR LINE- or TAPE OUT-
sockets of an amplifier.
Note: For recording directly from a CD player, the analog
input of the CD recorder should be connected to the
analog output of the CD player.
2For playback, connect cable 2between the ANALOG OUT-
sockets on the CD recorder and the input sockets of an
amplifier e.g. TAPE IN, CDR or AUX.
Note: Never use the PHONO input.
OPTICAL
IN
ANALOG
IN
L
R
L
R
OUT
DIGITAL
IN OUT
CD RECORDER
TAPE
OUT
L
R
L
R
IN
RECEIVER
1
2
Analog connectionsConnections general
INSTALLATION

English
12
Digital coaxial connection is only required in case you wish to
record from a CD player with a digital coaxial output.
Use the digital coaxial cable supplied.
1For recording, connect the cable 3between the DIGITAL
IN-socket on the CD recorder and the DIGITAL OUT-socket of
a CD player.
Note: Your CD recorder is equipped with a digital coaxial
output. This output can be used for digital playback.
Digital optical connection is only required in case you wish to
record from a CD player with a digital optical output.
When connecting the Digital
Optical cable, make sure it
is fully inserted until
there is a click.
1Remove the dust caps from the digital optical connection.
(We recommend you save the cap).
2For recording, connect a fibre-optic cable 4between the
digital optical input of the CD recorder and the digital-
optical output of a CD player.
Note: For playback, the digital coaxial output or analog output
should be connected to an amplifier.
OPTICAL
OUT
ANALOG
L
R
OUT
DIGITAL
OUT
CD PLAYER
OPTICAL
IN
ANALOG
IN
L
R
L
R
OUT
DIGITAL
IN OUT
CD RECORDER
TAPE
OUT
L
R
L
R
IN
RECEIVER
1
2
4
Digital optical connections
OPTICAL
OUT
ANALOG
L
R
OUT
DIGITAL
OUT
CD PLAYER
OPTICAL
IN
ANALOG
IN
L
R
L
R
OUT
DIGITAL
IN OUT
CD RECORDER
TAPE
OUT
L
R
L
R
IN
RECEIVER
1
2
3
Digital coaxial connections
INSTALLATION

English
13
1Plug the power cord supplied into the MAINS connector on
the CD recorder, then into a mains socket.
2Press ON/OFF.
➜The CD recorder will switch on.
Note:
- If the CD recorder is in Standby mode (red led on), press any
key to activate the recorder.
- The CD recorder will automatically adjust to the local mains
voltage.
- When the CD recorder is in the ‘OFF’ position, it is still
consuming some power. If you wish to disconnect your
player completely from the mains, withdraw the plug from
the AC outlet.
- Place the CD recorder on a solid, vibration free surface.
- Do not place the CD recorder near a source of heat or in
direct sunlight.
- Do not use the CD recorder under extremely damp
conditions.
- If the CD recorder is placed in a cabinet, make sure that a
2.5 cm space remains free on all sides of the CD recorder
for proper ventilation.
Important:
- Do not put the CD recorder on top of other equipement that
heats up the CD recorder (e.g. receiver or amplifier).
1Open the battery compartment cover.
2Insert 2 batteries (“AA”, LR-6 or UM-3; as supplied) as
shown.
3Replace the cover.
Note: We recommend you use 2 batteries of the same type
and condition.
Batteries contain chemical substances, so they should
be disposed of properly.
Inserting batteries in the remote control
Setup recommendations
Power supply
INSTALLATION