Photoflex LiteIgloo Series User manual

For detailed specifications, product tutorial videos and more, please visit www.photoflex®.com Rev 8/2016
LiteIgloo® Family Instrucons • Item #: 870295 (DP-MC1975) / 870289 (DP-LC3150)
This manual covers:
• Opening the LiteIgloo
• Posioning the camera
• Sweep instrucons (oponal)
• Lighng the LiteIgloo
• Folding the LiteIgloo
Opening the LiteIgloo Figures 1-9
1. Open the protecve carrying bag.
2. Remove the LiteIgloo from the protecve carry bag
Large LiteIgloo only: The large size comes folded in layers to
1/3 its size. Just pull the layers apart and the box will pop
open at.
3. The sidewalls are stack folded into two layers.
4. Pull one layer edge away from the other layer.
5. The box is now opened half way.
6. Grab the box frame at the inside corner and pull out.
7. The LiteIgloo will open fully.
8. Posion the box on your shoong surface. The front of the
LiteIgloo (with the port doors) should sit close to the front of
the shoong surface so that the camera lens can be posioned
close to the doors' opening.
9. The LiteIgloo completely open.
Figure 3
Figure 5
Figure 7
Figure 9
Figure 4
Figure 6
Figure 8
FirstStudio® LiteIgloo
The FirstStudio LiteIgloo is a tabletop shoong enclosure for achieving
so, nearly shadowless lighng when shoong items for catalogs,
promoon and online aucon. Each LiteIgloo comes with removable
white and blue sweeps for shoong on seamless backgrounds.
Figure 1 Figure 2

For detailed specifications, product tutorial videos and more, please visit www.photoflex®.com Rev 8/2016
Figure 13 Figure 14
Posioning the Camera
10. The front of the LiteIgloo has two (2) sewn-on, hinged doors
with Velcro® tabs on the top, boom and middle of the inside
edge. This allows the camera to be posioned high, low and
center. the Velcro on the inside edge allows the doors to be
closed when the camera is set high or low. Figure 10
11. The door can be held open with the sewn-on Vecro to the
sides of the LiteIgloo. Either or both doors can be held open.
This allows shoong o center of the LiteIgloo. Figure 11
Sweep Installaon (oponal)
12. The LiteIgloo comes with a blue sweep and a white sweep for
shoong seamless backgrounds.
Velcro tabs are sewn on the inside of the LiteIgloo forposioning
the sweeps. Figure 12
Lighng the LiteIgloo
13. This is a typical set up for shoong items in the LiteIgloo. Figure 13
Visit www.Photoex.com to view lessons on using the LiteIgloo
and placing the lights for opmal performance.
Folding the LiteIgloo Figures 14 – 16
14-16. To fold the LiteIgloo, push one edge of the box to the opposite
edge and then fold the box onto itself.
Large LiteIgloo Only:
The large LiteIgloo can be folded further by grabbing the opposite
edges of the at folded frame and twisng the frame to fold onto itself.
Figure 15 Figure16
Figure 10
Figure 11
Figure 12
Customer Support [phone]
E-mail: [email protected]
Photoflex is a division of PromarkBRANDS, Bartlett, IL USA.
©2016 ALL RIGHTS RESERVED. FirstStudio®, LiteIgloo®, Photoflex® and the Photoflex logo
are trademarks or registered trademarks of Photoflex and/or its affiliates in the U.S. and
other countries.
PHOTOFLEX® WARRANTY
• Warranties only cover manufacturer’s defects and workmanship.
• We reserve the right to inspect all merchandise returned (end
users and dealers) for warranty fulfillment.
• All returns must be pre-approved with Return Manufacturers
Authorization obtained from Photoflex/PromarkBRANDS.
• A receipt showing date of purchase will be required for all returns.
• Freight must be paid by the customer or dealer.
• Warranties are valid only from date of Original Purchase.
LiteIgloo® Family Instrucons • Item #: 870295DP (MC1975)/ 870289(DP-LC3150)