PIAGGIO Beverly Tourer 250 i.e. User manual

PIAGGIO WOULD LIKE TO THANK YOU
for choosing one of its products. We have prepared this booklet to help you to get the very best from your scooter. Please read it carefully before riding
the scooter for the first time. It contains information, tips and precautions for using your scooter. It also describes features, details and devices to assure
you that you have made the right choice. We believe that if you follow our suggestions, you will soon get to know your new vehicle and it will serve you
well for a long time to come. This booklet forms an integral part of the scooter; should the scooter be sold, it must be transferred to the new owner.
BEVERLY Cruiser 250ie

The instructions given in this manual are intended to provide a clear, simple guide to using your scooter; this booklet also details routine maintenance
procedures and regular checks that should be carried out on the vehicle at an authorised Dealer or Service Centre. The booklet also contains
instructions for simple repairs. Any operations not specifically described in this manual require the use of special tools and/or particular technical
knowledge: to carry out these operations refer to any authorised Dealer of Service Centres.
2

Personal safety
Failure to completely observe these instructions will result in serious risk of personal
injury.
Safeguarding the environment
Sections marked with this symbol indicate the correct use of the vehicle to prevent dam-
aging the environment.
Vehicle intactness
The incomplete or non-observance of these regulations leads to the risk of serious
damage to the vehicle and sometimes even the invalidity of the guarantee.
The signs that you see on this page are very important. They are used to highlight those
parts of the booklet that should be read with particular care. As you can see, each sign
consists of a different graphic symbol, making it quick and easy to locate the various
topics.
3

4

INDEX
VEHICLE...................................................................................... 7
Dashboard................................................................................ 9
Analogue instrument panel....................................................... 11
Key switch................................................................................. 11
Locking the steering wheel.................................................... 12
Releasing the steering wheel................................................ 12
Switch direction indicators........................................................ 13
Horn button............................................................................... 13
Light switch............................................................................... 14
Start-up button.......................................................................... 14
Engine stop button.................................................................... 15
The immobilizer system............................................................ 15
Keys...................................................................................... 16
Immobilizerdevice enabled indicator led............................... 17
Operation............................................................................... 17
Programming the immobilizer system................................... 18
Accessing the fuel tank............................................................. 20
Power supply socket................................................................. 20
The saddle................................................................................ 21
Opening the saddle............................................................... 23
Identification.............................................................................. 23
Rear top box opening................................................................ 24
Bag clip..................................................................................... 25
USE.............................................................................................. 27
Checks...................................................................................... 28
Refuelling.................................................................................. 28
Tyre pressure............................................................................ 30
Shock absorbers adjustment.................................................... 31
Running in................................................................................. 32
Starting up the engine............................................................... 32
Precautions........................................................................... 33
Difficult start up......................................................................... 34
Stopping the engine.................................................................. 34
Stand......................................................................................... 35
Automatic transmission............................................................. 36
Safe driving............................................................................... 37
MAINTENANCE........................................................................... 39
Engine oil level.......................................................................... 40
Engine oil level check............................................................ 40
Engine oil top-up................................................................... 41
Warning light (insufficient oil pressure)................................. 41
Engine oil change.................................................................. 41
Hub oil level.............................................................................. 43
Tyres......................................................................................... 45
Spark plug dismantlement........................................................ 46
Removing the air filter............................................................... 47
Air filter cleaning....................................................................... 48
Cooling fluid level...................................................................... 49
Checking the brake oil level...................................................... 50
Braking system fluid top up................................................... 51
Battery....................................................................................... 52
Use of a new battery............................................................. 53
Long periods of inactivity.......................................................... 54
Fuses........................................................................................ 54
Front light group........................................................................ 59
Headlight adjustment............................................................. 60
Front direction indicators........................................................... 61
Rear optical unit........................................................................ 62
Number plate light..................................................................... 64
Helmet compartment lighting bulb............................................ 65
Rear-view mirrors...................................................................... 65
Front and rear disc brake.......................................................... 66
Puncture.................................................................................... 67
Periods of inactivity................................................................... 68
Cleaning the vehicle.................................................................. 68
TECHNICAL DATA...................................................................... 73
5

Kit equipment............................................................................ 78
SPARE PARTS AND ACCESSORIES........................................ 79
Warnings................................................................................... 80
PROGRAMMED MAINTENANCE............................................... 83
Scheduled maintenance table................................................... 84
6

BEVERLY
Cruiser 250ie
Chap. 01
Vehicle
7

01_01
8
1 Vehicle

Dashboard (01_01)
A= Fuel gauge
B= Horn button
C= Turn indicator switch
D= Rear brake lever
E= Light switch
F= PASSING button
G= Instrument panel
H= Engine stop switch
I= Saddle electric opening switch
L= Front brake lever
M= Throttle grip
N= Starter button
O= Ignition key switch
P= Bag hook
9
1 Vehicle

01_02
10
1 Vehicle

Analogue instrument panel (01_02)
A = Low fuel warning light
B = Fuel gauge
C= Trip odometer
D= Trip odometer reset
E= Speedometer
F= Total Odometer
G= Water temperature warning light
H= Oil pressure warning light
I= Turn indicator warning light
L= High-beam warning light
M= Rpm indicator
N= Injection telltale light
O= Immobilizer LED
Key switch (01_03)
Key switch «A» is located on the front knee-guard panel near the bag hook.
SWITCH POSITIONS
ON«1»: Ready to start position, non-extractable key, mechanical anti-theft device
disabled.
OFF «2»: Ignition disabled, extractable key, mechanical anti-theft device disabled.
11
1 Vehicle

LOCK «3»: Ignition disabled, extractable key, mechanical anti-theft device enabled.
01_03
When shifting from "OFF" to "ON", the water temperature warning light "G" and
the injection warning light "N" come on for 3-4 seconds signalling that the fault
indication warning light works properly.
Locking the steering wheel
Turn the handlebar to the left as far as it will go, turn the key to position «LOCK» and
remove the key.
Releasing the steering wheel
Reinsert the key and turn it to «OFF».
12
1 Vehicle

01_04
Switch direction indicators (01_04)
Move the switch «C» to the left to indicate a left turn; Move the switch «C» to the right
to indicate a right turn; Press the central part of the switch «C» to deactivate the turn
indicators.
01_05
Horn button (01_05)
Push the button «B» to sound the horn.
13
1 Vehicle

01_06
Light switch (01_06)
When the light switch «E» is set to «1», the low-beam light is on. When set to «2», the
high-beam light is activated. Push the button «F» and the high-beam light is flashed.
01_07
Start-up button (01_07)
To start the engine, pull either brake lever and press the button «N».
14
1 Vehicle

01_08
Engine stop button (01_08)
The engine can be started when the emergency cut-off switch «H» is set to «1»
RUN; if the emergency cut-off switch «H» is set to «0» OFF , the engine cannot be
started or it shuts off if already running.
The immobilizer system
In order to enhance theft protection, the scooter is equipped with a «PIAGGIO IM-
MOBILIZER » electronic engine locking device that is activated automatically when
the starter key is removed. Upon start-up, the «PIAGGIO IMMOBILIZER» system
checks the starter key, and only if this key is recognised will the immobilizer system
allow the scooter to be started.
15
1 Vehicle

01_09
01_10
01_11
Keys (01_09, 01_10, 01_11)
Two types of keys come with the vehicle. The red-handgrip key "A" is the "MAS-
TER" key. Only a single copy of this key is supplied, which is necessary to program
all your other keys and for your dealer to perform some maintenance operations. For
this reason it is advised that it be used only in exceptional circumstances. The black
key "B" (single copy supplied) is used for normal operations such as:
- engine start up
- glove-box opening
Together with the keys comes a CODE CARD which is imprinted with the mechanical
code of the keys.
WARNING
LOSING THE RED KEY PREVENTS ANY REPAIRS OF THE 'PIAGGIO IMMOBIL-
IZER' SYSTEM AND THE ENGINE CONTROL UNIT.
WARNING
KEEPTHE'CODECARD'ANDTHEREDHANDGRIPKEYINASAFEPLACE(NOT
ON YOUR VEHICLE).
16
1 Vehicle

01_12
Immobilizerdevice enabled indicator led (01_12)
Activation of the «PIAGGIO IMMOBILIZER» system is signalled by a flashing «O»
warning light.
In order to reduce battery discharge, the indicator LED turns off automatically after 48
hours of uninterrupted functioning.
Should the system fail, different LED flashing patterns will provide the Authorised
Service Centre with information on the type of fault detected.
Operation
Every time the starter key is extracted from either the «OFF» or «LOCK» position, the
protection system activates the engine lock. Turning the key to «ON», with the emer-
gency cut-off switch set to «ON» and the side stand up, disables the engine lock
providedthat thesafety systemrecognises thecode transmittedby thekey. Ifthe code
is not recognised, turn the key first to "OFF" and then to "ON"; if the lock cannot be
disabled,trywiththeotherkeysupplied(red-coloured).Iftheenginecannotbe started,
contact an Authorised Service Centre, which is provided with the electronic equip-
ment required to detect and repair the system. The immobilizer is also activated when
the emergency cut-off switch stops the engine or the side stand is lowered. This hap-
pens even if the starter key is in «ON». When additional keys are required, please
note that data storage (up to 7 keys max.) must be done on all keys, both new and
existing ones. Take the red-handgrip key and all the black keys supplied to an Au-
17
1 Vehicle

thorised Service Centre. The codes of keys not submitted for the new storage
procedure are deleted from the memory. Any lost keys will therefore not be enabled
to start the engine.
WARNING
EACH KEY HAS ITS OWN AND UNIQUE CODE, WHICH MUST BE STORED BY
THE SYSTEM CONTROL UNIT.
VIOLENT SHOCKS MAY AFFECT THE ELECTRONIC COMPONENTS OF THE
KEY.
IF OWNERSHIP OF THE VEHICLE IS TRANSFERRED, THE RED-HANDGRIP KEY
(AS WELL AS THE OTHER KEYS) AND THE "CODE CARD" MUST ALSO BE
TRANSFERRED TO THE NEW OWNER.
Programming the immobilizer system
The procedure for programming the «PIAGGIO IMMOBILIZER» system and/or for
storing other key codes is described below.
The programming procedure should be carried out with the engine stop switch set to
«RUN».
Procedure start - red key
Insert the red-handgrip key in the switch key (in "OFF" position) and turn it to "ON".
After 1 - 3 seconds, turn the key to "OFF" again and pull it out.
18
1 Vehicle

Intermediate step - black key
After pulling out the red key, insert the black key within 10 seconds and promptly turn
it to "ON". After 1-3 seconds, turn the key to "OFF" again and pull it out. In this way,
a maximum of 7 black keys can be programmed by repeating the above procedure
keeping the indicated times.
Final step - red key
After pulling out the last black key, insert the red key again and turn it to "ON" (this
operation should be performed within 10 seconds of pulling out the previous key).
Leave it in this position for 1 to 3 seconds and return it to the «OFF» position.
Proper programming check
Insert the red key disabling the transponder (i.e., tilt the key cap by 90°) and turn the
key to "ON". Perform the engine start-up operation. Ensure that the engine does not
start. Insert the black key and repeat the start-up operation. Check that engine starts.
WARNING
SHOULDTHEENGINE START WITH THERED KEY (WITH TRANSPONDEROFF),
OR IN THE EVENT OF WRONG OPERATION DURING PROGRAMMING, REPEAT
THE PROCEDURE FROM THE BEGINNING.
19
1 Vehicle

01_13
01_14
Accessing the fuel tank (01_13, 01_14)
Insert the key into the switch and press down until the glove box opens. In the event
that the key switch is in «LOCK», turn the key to «OFF» or «ON» before pressing
down. Press lever «B» and open the cover over the fuel tank cap «C».
01_15
Power supply socket (01_15)
There is a plug socket "D" inside the helmet compartment.
The plug socket may be used for external consumers (mobile phone, inspection light,
etc.).
20
1 Vehicle