Pico Macom TSPPS-2150-2 User manual

40-2150MHz 130dB EMI Satellite Splitters
www.picomacom.com
DISTRIBUTION
Passive Components
355 Parkside Drive San Fernando, CA 91340
Ph: 818-493-4300 Toll Free: 800-421-6511 Fax: [phone]
C-11
Rev. 12/02
TSPPS2150
Series
TruSpec’s TSPPS2150-series professional-commercial grade high frequency
satellite splitters are manufactured to precise performance specifications to pro-
vide low insertion loss, high isolation and return loss performance.These split-
ters are ideally suited for headends where satellite signals are split to multiple
receivers and used in both 950-1450 MHz satellite distribution systems and
stacked polarity 950-2150MHz satellite systems. DC power passes through all
ports for full flexibility in remote LNB powering applications. Our advanced printed
board circuitry ensures high-quality analog or digital signal transfer. Precision
machined F-port threads ensure easy connector installation and removal, and
improved port-to-connector interface. Internal seizing pins provide excellent con-
nectivity to connector center lead. TSPPS2150 series splitters feature a solder-back
cover-plate to provide the highest possible EMI-RFI shielding >-130dB eliminating sig-
nal ingress and providing a full environmental seal. A yellow-chromate coating over a
zinc-alloy diecast housing ensures excellent corrosion resistance. Each
TSPPS2150 splitter is fully tested at the factory to fully comply with precise quality
standards.
TSPPS2150 Series
40-2150MHz 130dB EMI Satellite Splitters
High frequency broadband
range 40-2150MHz L-Band
suitable for analog and digital
satellite applications
DC power passage to all ports
provides for remote LNB-pow-
ering applications and power-
ing the antenna preamplifier
directly from the headend
Solder-back cover-plate pro-
vides maximum EMI-RFI
shielding >-130dB eliminating
signal ingress to guarantee
distortion free pictures
Tin-plated zinc-alloy diecast
housing ensures excellent
ground bonding and long cor-
rosion-free service life in
indoor/outdoor applications
High-performance printed
board circuitry provides low
intermodulation distortion to
ensure excellent digital
performance
1-inch centered 1/2˝ long preci-
sion machined F-connector
threads ensure improved port-
to-connector interface and
accommodate external security
devices
Internal seizing pins provide
improved connectivity to con-
nector center lead
Mounting tabs with provided
mounting screws enables easy
installation
Cast-in integrated ground
block with convenient mount-
ing screws enables easy and
cost-effective installations
TSPPS-2150-2
TSPPS-2150-4

TSPPS2150 Series
Product Specifications
40-2150MHz 130dB EMI Satellite Splitters
INPUT
40-2150MHz
OUT OUT
TSPPS-2150-2
TRU SPEC
INPUT OUT
TSPPS-2150-4
OUT
OUT OUT
40-2150 MHz
TRU SPEC
TSPPS-2150-2 TSPPS-2150-4
TSPPS-2150-2 2-Port Splitter
TSPPS-2150-4 4-Port Splitter
Ordering Information
Start 40.000 Mhz Sto
p
2150 Mhz
dB
0
-1
-2
-3:
-4
-5
-6
-7
-8
1:Transmission Log Mag 1.0 dB/ Ref -3.00 dB C
Meas1: Mkr1 40.000 Mhz
-3.531 db
A
B
TSPPS-2150-2
Insertion Loss (In-Out) : 4.2dB Typical Trace A
Return Loss (Output): 16dB Typical
Isolation (Out-Out): 29dB Typical
Dimensions: 2.3˝ (L) x 1.9˝ (W) x 0.6˝(H)
TSPPS-2150-4
Insertion Loss (In-Out): 8.3dB Typical Trace B
Return Loss (Output): 12dB Typical
Isolation (Out-Out): 21dB Typical
Dimensions: 3.0˝(L) x 1.9˝(W) x 0.6˝(H)
Specifications
INSERTION LOSS Typical
www.picomacom.com
C-12
Rev. 12/02 355 Parkside Drive San Fernando, CA 91340
Ph: 818-493-4300 Toll Free: 800-421-6511 Fax: [phone]
Specifications Subject to Change © Copyright 2003 Pico Macom, Inc.