PSEN opII3F Series
Operating Manual PSEN opII3F Series
1003504-EN-01 6
INFORMATION
This gives advice on applications and provides information on special fea-
tures.
Overview
Safety light grids in the PSEN opII3F Series constitute electrosensitive protective equip-
ment (ESPE type: 3) in accordance with DIN EN 61496-1 for work areas in which ma-
chines, robots, and automated systems could endanger the physical integrity of operators.
Unit features
}Resolution: 14 mm
}Infrared protected field is generated
}LED indicator for status information
}Optical synchronisation of transmitters and receivers
}Connection to evaluation devices
– PDP67 ION and PDP67 ION HP: 5-pin M12 two-sided connector (see Order refer-
ence for accessories, connection to PDP67 [ 54])
– all other suitable evaluation devices (see System connection [ 32]): 5-pin M12
one-sided connector and open cable end connection to clamping sleeves (see Or-
der reference for accessories, connection to other evaluation devices [ 54])
}Aluminium alloy housing
}Die-cast zinc end caps
}Shock resistance
– Bracket Swivel-Mount : 10g
– Bracket Adv Bracket Kit : 50g
}Front panel of PC
}Standard installation kit with flexible bracket (swivel mount) (included in delivery) to hold
the transmitter/receiver
– For standard application
– Transmitter/receiver remains rotatable for proper orientation
}Dead-zone-free safety light grid installation [ 22] with the
PSENopIIAdvBracketKit (available as an accessory [ 53]) as a bracket for a
transmitter/receiver
– Dead-zone-free on both sides for protected field height of 300 mm or more
– Dead-zone-free on one side for protected field height of 150 mm
– Transmitter/receiver remains rotatable for proper orientation
– Protected field heights of 150-600 mm, including: 1PSENopIIAdvBracketKit-2
(=2clamping units per transmitter and receiver)
