PIONEER DJ DDJ-SX3 User manual

DJ Controller
Controlador DJ
DJコントローラー
DDJ-SX3
For FAQs and other support information for this product, visit the above sites.
Operating Instructions (Quick Start Guide)
Manual de instrucciones (Guía de inicio rápido)
取扱説明書（クイックスタートガイド）
Para consultar las preguntas frecuentes y otra información de soporte de este producto, visite el sitio de arriba.
日本語
pioneerdj.com/support/
http://serato.com/
上記のサイトで、本製品のFAQなどのサポート情報をご覧いただけます。
English Español
商品相談・修理受付・付属品購入窓口のご案内
お取り扱 いにお困りのとき、本書の巻末をご覧ください。 保証書付き

2En
CAUTION
T
O PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL. D3-4-2-1-1_B1_En
WARNING
This equipment is not waterproof. To prevent a fire or
shock hazard, do not place any container filled with
liquid near this equipment (such as a vase or flower
pot) or expose it to dripping, splashing, rain or
moisture.
D3-4-2-1-3_A1_En
WARNING
To prevent a fire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
D3-4-2-1-7a_A1_En
Operating Environment
Operating environment temperature and humidity:
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light).
D3-4-2-1-7c*_A2_En
CAUTION
The 1STANDBY/ON switch on this unit will not
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit, you will need to unplug it from the
AC outlet to shut down all power. Therefore, make
sure the unit has been installed so that the power
cord can be easily unplugged from the AC outlet in
case of an accident. To avoid fire hazard, the power
cord should also be unplugged from the AC outlet
when left unused for a long period of time (for
example, when on vacation).
D3-4-2-2-2a*_A1_En
When using this product, confirm the safety
information shown on the bottom of the unit.
D3-4-2-2-4_B1_En
WARNING
Store small parts out of the reach of children and
infants. If accidentally swallowed, contact a doctor
immediately.
D41-6-4_A1_En
CAUTION
This product is evaluated in moderate and tropical
climate condition.
D3-8-2-1-7a_A1_En
VENTILATION CAUTION
When installing this unit, make sure to leave space
around the unit for ventilation to improve heat radiation
(at least 5 cm at top, 5 cm at rear, and 5 cm at each
side).
D3-4-2-1-7d*_A1_En
The graphical symbol placed on the product
means alternating current.
The graphical symbol placed on the product
means direct current.
The graphical symbol placed on the product
means Class II equipment.
D3-8-2-4_A1_En
Co
n
How to re
a
Thank you f
o
This ma
n
your PC
/
use this
Please
n
describ
e
specific
a
may diff
e
Please
n
browser
describ
e
Please
n
describ
e
screens.
This manua
l
of this unit
a
For more de
t
Instructions
For how
the Ope
ra
Befor
e
Feature
s
What’s i
n
Acquirin
Installin
g
About th
Part n
a
Browser
Deck se
c
Mixer se
c
Effect se
Rear pa
n
Front pa
n
Conn
e
Playi
n
Changin
Quitting
Additi
Troubles
About tr
a
Caution
s
Specific
a

3
English
En
t
.
n
nect
m the
k
e
e
r
t in
w
er
let
*_A1_En
-
4_B1_En
d
o
r
6
-4_A1_En
c
al
a_A1_En
Contents
How to read this manual
Thank you for buying this Pioneer DJ product.
This manual briefly explains procedures of connecting this unit to
your PC/Mac through outputting sound. For more details on how to
use this unit, refer to “Operating Instructions” on Pioneer DJ site.
Please note that the screens and specifications of the software
described in this guide as well as the external appearance and
specifications of the hardware are currently under development and
may differ from the final specifications.
Please note that depending on the operating system version, web
browser settings, etc., operation may differ from the procedures
described in this manual.
Please note that the language on the screens of the software
describes in this guide may differ from the language on your
screens.
This manual provides brief descriptions regarding the names of parts
of this unit and the connections between this unit and peripherals.
For more detailed instructions on using this unit, see the Operating
Instructions for this unit.
For how to obtain the Operating Instructions for this unit, see Viewing
the Operating Instructions on page 4.
Before start......................................................................4
Features........................................................................................................4
What’s in the box .........................................................................................4
Acquiring the manual .................................................................................4
Installing the software................................................................................. 4
About the AC adapter..................................................................................6
Part names ......................................................................8
Browser section........................................................................................... 8
Deck section................................................................................................. 8
Mixer section................................................................................................ 9
Effect section................................................................................................9
Rear panel .................................................................................................. 10
Front panel .................................................................................................10
Connecting devices to this unit ...............................11
Playing music by operating Serato DJ Pro ..........12
Changing the settings...............................................................................14
Quitting the system ...................................................................................14
Additional information...............................................15
Troubleshooting.........................................................................................15
About trademarks and registered trademarks .......................................15
Cautions on copyrights .............................................................................15
Specifications.............................................................................................15

4En
Before start
Features
This unit is an all-in-one DJ controller designed specifically for Serato
Limited’s DJ software “Serato DJ Pro.”
Performance interfaces, such as “PERFORMANCE PADS,” “4-CHANNEL
MIXER,” etc., are arranged comfortably to control functions included in
“Serato DJ Pro.”
In addition, this unit is equipped with abundant input/output terminals
to correspond to various DJ performances. This unit is also designed
with a sense of quality to correspond to various scenes such as clubs
and home parties.
What’s in the box
AC adapter
Power plug
USB cable1
Operating Instructions (Quick Start Guide) (This document)
Serato DJ Pro EXPANSION PACK VOUCHER2
1 Only one USB cable is supplied on this unit. If you use two cables,
use a USB cable supported to USB 2.0.
2 Note that the Serato DJ Pro EXPANSION PACK VOUCHER cannot
be reissued. You will need to use the voucher code to activate the
expansion pack. Make sure to store it in a safe place so that you do
not lose it.
Acquiring the manual
Various instructions are sometimes provided as files in PDF format.
Adobe®Reader®must be installed in order to view PDF format files.
Viewing the Operating Instructions
1 Launch a web browser on the PC/Mac and access the
Pioneer DJ site below.
pioneerdj.com
To select your language, click the flag icon on the upper-right
screen.
2 Point the cursor to [Support].
3 Click [Tutorials, manuals & documentation].
4 Click [DDJ-SX3] under [DJ CONTROLLER].
5 Select the language of the manual from the list.
Download the manual if needed.
Downloading the Serato DJ Pro software
manual
1 Access the Serato site.
http://serato.com/
2 Click [Serato DJ Pro] from [PRODUCT].
3 Click [DOWNLOAD SERATO DJ PRO].
4 Click [Manuals and Downloads].
5 Click the Serato DJ Pro software manual of the
required language.
Installing the software
Before installing the software
The Serato DJ Pro software and driver software are not included.
Access and download the software from the Pioneer DJ support site.
pioneerdj.com/support/
The user is responsible for preparing the PC/Mac, network devices
and other elements of the Internet usage environment required for
a connection to the Internet.
Downloading the driver software
1 Launch a web browser on the PC/Mac and access the
Pioneer DJ site.
pioneerdj.com
To select your language, click the flag icon on the upper-right
screen.
2 Point the cursor to [Support].
3 Click [Software & firmware updates].
4 Click [DDJ-SX3] under [DJ CONTROLLER].
5 Click [Drivers].
6 Click [Download link], and then save the file.
About the Serato DJ Pro software
Serato DJ Pro is a DJ software application by Serato Limited. DJ
performances are possible by connecting the PC/Mac on which this
software is installed to this unit.
Minimum operating environment
Supported operating systems CPU and required memory
Mac: macOS High Sierra
10.13/Sierra 10.12 (latest
update), OS X 10.11
(latest update)
Intel®processor Core™i5 and i7 1.07
GHz or better
4 GB or more of RAM
Windows®10 /
Windows®8.1 /
Windows®7
(latest service pack)
32-bit
version
Intel®processor Core™i5 and i7
1.07 GHz or better
4 GB or more of RAM
64-bit
version
Intel®processor Core™i5 and i7
1.07 GHz or better
4 GB or more of RAM
Others
USB port A USB 2.0 port is required to connect the PC/Mac with
this unit.
Display resolution Resolution of 1 280 × 720 or greater
Internet connection
An Internet connection is required for registering
the “Serato.com” user account and downloading the
software.
For information on the latest system requirements, compatibility, and supported
operating systems, see “Software Info” of “DDJ-SX3” on the Pioneer DJ
support site below.
pioneerdj.com/support/
As for operating systems, use the latest version and latest service pack.
Operation is not guaranteed on all PC/Mac, even if all the required operating
environment conditions indicated here are fulfilled.
Dependin
disk may
n
Mac book
to provid
e
connecte
d
Use of th
e
services
a
Obtai
n
1 Access
http://serat
o
2 Click [
S
The Serato
D
The
d
3 Click [
D
4 Create
If yo
u
proc
If yo
u
follo
w
—
F
a
i
n
—I
f
p
w
—
O
a
c
Be c
a
spec
requ
The
p
acc
o
priv
a
5 Click t
h
com.”
This takes y
o
6 Log in
.
Input the e
m
“Serato.co
m
7 Down
l
downloa
d
Install
a
Do not con
Log on
a
before i
n
If any ot
h
1 Unzip
t
(Pioneer_
2 Doubl
e
3 Proce
e
on the sc
r
If [Window
s
in progress,
with the ins
t
When the in
appears.
After installi
4 Unzip
t

5
English
En
u
ded.
port site.
o
rk devices
e
quired for
c
cess the
p
er-right
DJ
ch this
m
ory
a
nd i7 1.07
a
nd i7
a
nd i7
P
C/Mac with
s
tering
o
ading the
nd supported
e
er DJ
p
ack.
operating
Depending on the power saving settings, etc. of the PC/Mac, the CPU and hard
disk may not provide sufficient processing capabilities. For laptop PCs and
Mac books in particular, make sure the computer is in the proper conditions
to provide constant high performance (for example by keeping the AC power
connected) when using Serato DJ Pro.
Use of the Internet requires a separate contract with a provider offering Internet
services and payment of provider fees.
Obtaining the Serato DJ Pro software
1 Access the Serato web site.
http://serato.com/
2 Click [Serato DJ] under [DJ PRODUCTS].
The Serato DJ Pro download page is displayed.
The download page is subject to change.
3 Click [DOWNLOAD SERATO DJ].
4 Create an account of “Serato.com”.
If you have already registered a user account on “Serato.com”,
proceed to step 6.
If you have not completed registering your user account, do so
following the procedure below.
—Following the instructions on the screen, input your email
address and the password to set, and then select the region
in which you live.
—If you check [E-mail me Serato newsletters], newsletters
providing the latest information on Serato Limited products
will be sent from Serato Limited.
—Once user account registration is completed, you will receive
an e-mail at the e-mail address you have input. Check the
contents of the email sent from “Serato.com.”
Be careful not to forget the email address and password
specified when you performed user registration. They will be
required for updating the software.
The personal information input when registering a new user
account may be collected, processed and used based on the
privacy policy on the Serato Limited website.
5 Click the link in the e-mail message sent from “Serato.
com.”
This takes you to the Serato DJ Pro download page.
6 Log in.
Input the email address and password you have registered to log in to
“Serato.com.”
7 Download the Serato DJ Pro software from the
download page.
Installation procedure (Windows)
Do not connect this unit and the PC until installation is completed.
Log on as the user which was set as the administrator of the PC
before installing.
If any other programs are running on the PC, quit them.
1 Unzip the downloaded driver software
(Pioneer_DDJSX3_X.XXX.).
2 Double-click [DDJ-SX3_X.XXX.exe].
3 Proceed with installation according to the instructions
on the screen.
If [Windows Security] appears on the screen while the installation is
in progress, click [Install this driver software anyway] and continue
with the installation.
When the installation program is completed, a completion message
appears.
After installing the driver software, install the Serato DJ Pro software.
4 Unzip the downloaded Serato DJ Pro software file.
5 Double-click the unzipped software file to launch the
installer.
6 Read the terms of the license agreement carefully,
and if you agree, select [I agree to the license terms and
conditions], then click [Install].
If you do not agree to the contents of the license agreement, click
[Close] to cancel installation.
The message of successful installation appears when installation is
completed.
7 Click [Close] to quit the Serato DJ Pro installer.
Installation procedure (Mac)
Do not connect this unit and the Mac until installation is completed.
If any other programs are running on the Mac, quit them.
1 Unzip the downloaded driver software
(DDJSX3_M_X.X.X.zip).
2 Double-click [DDJ-SX3_M_X.X.X.dmg].
3 Double-click [DDJ-SX3_AudioDriver.pkg].
4 Follow the displayed instructions to install.
5 Unzip the downloaded Serato DJ Pro software file.
6 Double-click the unzipped software file to launch the
installer.
7 Read the terms of the license agreement carefully,
and if you agree, click [Agree].
If you do not agree to the contents of the usage agreement, click
[Disagree] to cancel installation.
8 Click [Install].
9 Follow the displayed instructions to install.
10 Click [Close] to quit the installer.

6En
About installing the driver software into
macOS High Sierra 10.13
For macOS High Sierra 10.13, the new security function is added.
When installing Pioneer DJ driver software into macOS High Sierra
10.13, the driver software authentication is required. Follow the
procedures below.
Following procedures are necessary when newly installing the driver
software into macOS High Sierra 10.13.
If the driver software has been installed into macOS or OS X before
updating to macOS High Sierra 10.13, following procedures are not
necessary.
When installing Pioneer DJ driver software into macOS High Sierra
10.13, the following screen is displayed.
Click [OK].
After permitting the driver software installation, the driver software
installing will be completed.
1 Open [System Preferences], and then click [Security
& Privacy].
2 Check that [System software from developer “Pioneer
DJ Corporation” was blocked from loading.] is displayed
on the lower screen.
This is shown for 30 minutes from starting the driver software
installation.
If it is not shown, repeat the procedure of the driver software installation.
3 Click [Allow] on the lower-right screen.
4 If the DJ equipment is connected to Mac, disconnect
the USB cable, and then connect it again.
About the AC adapter
Safety instructions
Do not use this unit with a coin, paper clip or other metal object
stuck between the AC adapter and power plug. Doing so could cause
a short circuit, leading to fire or electric shock.
When mounting the AC adapter on a wall outlet, make sure there is
no space between the AC adapter and the wall outlet. Faulty contact
or a coin, paper clip or other metal object getting stuck in the space
could cause a short circuit, leading to fire or electric shock.
Coin, paper clip or other metal object
Top
Side
The power plug could come detached from the AC adapter and
remain in the power outlet if someone trips on the AC adapter’s
power cord or if something hits the AC adapter. If this happens,
remove the power plug remaining in the outlet with dry hands,
holding it as shown on the diagram below and without touching
metal parts. Do not use any tools to remove it.
Do not touch.
Mount
i
Slide the
p
adapter
u
in until a
c
Remo
v
While pr
e
unit, slid
e
shown o
n
Once the p
o
Power
This produc
t
appropriate
Type 1 (f
o
Type 1 pl
u
Type 2
Type 3 (f
o
areas wh
e

7
English
En
object
c
ould cause
re there is
u
lty contact
the space
c
k.
t
al object
Top
e
r and
a
pter’s
p
pens,
a
nds,
u
ching
u
ch.
Mounting the power plug
Slide the power plug along the guide rails in the AC
adapter unit as shown on the diagram below, then press
in until a click is heard.
Removing the power plug
While pressing the [PUSH] button on the AC adapter
unit, slide the power plug away from the adapter as
shown on the diagram below to remove it.
Once the power plug is mounted, there is no need to remove it.
Power plug
This product comes with the types of power plugs shown below. Use the
appropriate power plug for the country or region you are in.
Type 1 (for Japan, Mexico, and other areas where the
Type 1 plug is used)
Type 2
Type 3 (for Hong Kong, Malaysia, Singapore, and other
areas where the Type 3 plug is used)
Type 4 (for Australia, New Zealand, and other areas
where the Type 4 plug is used)
Type 5 (for Thailand, South Korea, and other areas
where the Type 5 plug is used)

8En
Part names
For further details on each button and control, refer to “Part names and
functions” section in the Operating Instructions.
1 Browser section
2 Deck section
3 Mixer section
4 Effect section
Browser section
1LOAD buttons
2 Rotary selector
3 BACK button
4 LOAD PREPARE button
5 LIBRARY A button
6 LIBRARY B button
Deck section
1 Jog wheel
2 NEEDLE SEARCH pad
3 KEY LOCK button
4 SLIP button
5 TEMPO slider
6 FLIP SLOT button
7 FLIP REC button
8 FLIP START button
9 SLICER mode button
a AUTO LOOP button
b SAMPLER mode button
c LOOP 2X button
d LOOP 1/2X button
e LOOP OUT button
f LOOP IN button
g PARAMETER button, PARAMETER button
h Performance pads
i PLAY/PAUSE button
j CUE button
k HOT CUE mode button
l ROLL mode button
m SYNC button
n QUAN
T
o SHIFT
b
p DECK
b
q KEY D
O
r KEY U
P
s CENS
O
Mixer
1 Input
s
2 TRIM
c
3 EQ (HI
,
4 Chann
e
5 COLO
R
6 Headp
7 Headp
8 Chann
e
9 CROS
S
a Crossf
a
b MAST
E
c Maste
r
d SOUN
D
e MAST
E
f BOOT
H
g SAMP
L

9
English
En
n
n QUANTIZE button
o SHIFT button
p DECK button
q KEY DOWN button
r KEY UP button
s CENSOR button
Mixer section
1 Input select switches
2 TRIM controls
3 EQ (HI, MID, LOW) controls
4 Channel Level Indicators
5 COLOR controls
6 Headphones CUE/MIC REVERB buttons
7 Headphones CUE buttons
8 Channel faders
9 CROSS FADER ASSIGN switches
a Crossfader
b MASTER LEVEL control
c Master level indicator
d SOUND COLOR FX buttons
e MASTER CUE button
f BOOTH MONITOR LEVEL control
g SAMPLER VOLUME control
Effect section
1 Effect parameter controls
2 FX BEATS control
3 Effect parameter buttons
4 CH ASSIGN CH1 button
CH ASSIGN CH2 button

10 En
Rear panel
1 MASTER OUT 1 terminals
Do not connect any terminal which provides phantom power to
these terminals or a power cord of another product.
2 MASTER OUT 2 terminals
3 BOOTH OUT terminals
4 MIC2 terminal
5 LINE terminals
6 LINE/PHONO input terminals
7 SIGNAL GND terminal
8 LINE/PHONO switches
9 MIC1 terminal
a Kensington security slot
b USB terminals
c STANDBY/ON switch
This switches this unit’s power between on and standby.
d DC IN terminal
e Cord hook
Front panel
1 HEADPHONES jacks
2 HEADPHONES LEVEL control
3 HEADPHONES MIXING control
4 CROSS FADER CURVE switch
5 MIC3 terminal
6 MIC3 LEVEL control
7 MIC3 ON/OFF switch
Co
n
1 Conne
c
terminals
2 Conne
c
compone
OUT 2] te
To o
u
spe
a
For
d
Ope
r
3 Conne
c
4 Turn o
5 Conne
c
Slide the po
w
diagram an
d
For
d
adap

11
English
En
Connecting devices to this unit
1 Connect headphones to one of the [HEADPHONES]
terminals.
2 Connect powered speakers, a power amplifier,
components, etc., to the [MASTER OUT 1] or [MASTER
OUT 2] terminals.
To output the sound from the [BOOTH OUT] terminals, connect
speakers or other devices to the [BOOTH OUT] terminals.
For details on connecting the input/output terminals, see the
Operating Instructions.
3 Connect this unit to your PC/Mac via a USB cable.
4 Turn on the PC/Mac.
5 Connect the power plug to the AC adapter.
Slide the power plug into the AC adapter’s guide rails as shown on the
diagram and press in until a click is heard.
For detailed cautions on the AC adapter, see “About the AC
adapter” (p. 6).
The shape of the plug differs according to the region in which the
unit is sold.
6 Connect the AC adapter.
7 Press the [STANDBY/ON] switch on this unit’s rear
panel to turn on this unit.
For Windows users
The message [Installing device driver software] may
appear when this unit is first connected to the PC or when it is
connected to a different USB port on the PC. Wait a while until
the message [Your devices are ready for use] appears.
8 Turn on the devices connected to the output
terminals (powered speakers, power amplifier,
components, etc.).
When a microphone, DJ player or other external device is
connected to input terminals, the power of that device also turns
on.

12 En
Playing music by operating Serato DJ Pro
Launching Serato DJ Pro
This manual consists mainly of explanations of functions of this unit as hardware. For detailed instructions on operating the Serato DJ Pro software,
see the Serato DJ Pro software manual.
For Mac
In Finder, open the [Applications] folder, then click the [Serato DJ Pro] icon.
For Windows 10
From the [Start] menu, click [Serato] > [Serato DJ Pro] icon.
For Windows 8.1
From [Apps view], click the [Serato DJ Pro] icon.
For Windows 7
From the Windows [Start] menu, click the [Serato DJ] icon under [All Programs] > [Serato DJ Pro].
PC/Mac screen directly after the Serato DJ Pro software is launched
The [BUY/ACTIVATE] icon may appear on the right side of the screen displayed when Serato DJ Pro is launched for the first time, but for those
using DDJ-SX3 there is no need to activate or purchase a license. You can purchase expansion packs such as DVS and use them as additional
options.
PC/Mac screen when a track is loaded in the Serato DJ Pro software
Click [Library] at the upper left of the PC/Mac screen, then select [Vertical] or [Horizontal] from the pull-down menu to switch the Serato DJ Pro
screen.
A Deck section
The track information (the name of the loaded track, artist name, BPM, etc.), the overall waveform and other information is displayed here.
B Waveform display
The loaded track’s waveform is displayed here.
C Browser section
Crates in which tracks in the library or sets of multiple tracks are stored are displayed here.
Import
The followin
There ar
e
softwar
e
If you ar
e
ITCH, S
e
track lib
r
used as
If you ar
e
libraries
1 Click t
h
screen to
The content
s
are displaye
2 Click t
h
tracks yo
u
3 On th
e
the selec
t
A crate is cr
b
a [File
b Crat
Loadin
g
The followin
an example.
1 LOAD
b
2 Rotar
y
3 BACK
b
4 LIBRA
R
LIBRA
R
1 Press t
button a
n

13
English
En
P
ro
software,
r those
itional
D
J Pro
r
e.
Importing tracks
The following describes the typical procedure for importing tracks.
There are various ways to import tracks with the Serato DJ Pro
software. For details, see the Serato DJ Pro software manual.
If you are already using Serato Limited’s DJ software (Scratch Live,
ITCH, Serato DJ Intro, or Serato DJ Lite) and have already created
track libraries, the track libraries you have previously created can be
used as such.
If you are using Serato DJ Intro and have already created track
libraries, you may have to reanalyze the tracks.
1 Click the [Files] key on the Serato DJ Pro software
screen to open the [Files] panel.
The contents of your PC/Mac or the peripheral connected to the PC/Mac
are displayed in the [Files] panel.
2 Click the folder on the [Files] panel containing the
tracks you want to add to the library to select it.
3 On the Serato DJ Pro software screen, drag and drop
the selected folder to the crates panel.
A crate is created and the tracks are added to the library.
a
b
a [Files] panel
b Crates panel
Loading tracks and playing them
The following describes the procedure for loading tracks into deck [1] as
an example.
1 LOAD button
2 Rotary selector
3 BACK button
4 LIBRARY A button
LIBRARY B button
1 Press the [LIBRARY A] button or the [LIBRARY B]
button and select the PC/Mac.
2 Press this unit’s [BACK] button, move the cursor to
the crates panel on the PC/Mac screen, then turn the
rotary selector to select the crate, etc.
3 Press the rotary selector, move the cursor to the
library on the PC/Mac screen, then turn the rotary
selector and select the track.
a
b
a Library
b Crates panel
4 Press the [LOAD] button to load the selected track
onto the deck.
Playing tracks and outputting the sound
The following describes the procedure for outputting the channel 1
sound as an example.
Set the volume of the devices (power amplifier, powered speakers,
etc.) connected to the [MASTER OUT 1] and [MASTER OUT 2]
terminals to an appropriate level. Note that loud sound will be output
if the volume is set too high.
5Input select switch
6 TRIM control

14 En
7 EQ (HI, MID, LOW) controls
8 COLOR control
9 Headphones CUE button
aChannel fader
bCROSS FADER ASSIGN switch
cMASTER LEVEL control
dSOUND COLOR FX buttons
eMASTER CUE button
fBOOTH MONITOR LEVEL control
gCrossfader
hHEADPHONES LEVEL control
iHEADPHONES MIXING control
jCROSS FADER CURVE control
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc. Position
MASTER LEVEL control Turned fully counterclockwise
TRIM control Turned fully counterclockwise
EQ (HI, MID, LOW) controls Center
COLOR control Center
Channel fader Moved forward
CROSS FADER ASSIGN switch [THRU] position
Input select switch [USB A] or [USB B] position
2 Press the [] button to play the track.
3 Move the channel fader away from you.
4 Turn the [TRIM] control.
Adjust [TRIM] so that the orange indicator on the channel level indicator
lights at the peak level.
5 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the sound level output from the [MASTER OUT 1] and [MASTER
OUT 2] terminals to an appropriate level.
Monitoring sound with headphones
Set the positions of the controls, etc., as shown below.
Names of controls, etc. Position
HEADPHONES MIXING control Center
HEADPHONES LEVEL control Turned fully counterclockwise
1 Press the headphones [CUE] button for the channel 1.
2 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate
level.
Note
This unit and the Serato DJ Pro software include a variety of functions
enabling individualistic DJ performances. For details on the respective
functions, see the operating instructions and the Serato DJ Pro software
manual.
This unit’s operating instructions can be downloaded from the
Pioneer DJ support site. For details, see Acquiring the manual (p.
4).
 The Serato DJ Pro software manual can be downloaded from “Serato.
com”. For details, see Downloading the Serato DJ Pro software manual
(p. 4).
Changing the settings
For details to change settings on this unit, see the “Changing the
settings” section in the Operating Instructions.
Quitting the system
1 Quit Serato DJ Pro.
When the software is closed, a message for confirming that you want to
close it appears on the PC/Mac screen. Click [Yes] to close.
2 Press the [STANDBY/ON] switch on this unit’s rear
panel to set this unit to standby.
3 Disconnect the USB cable from your PC/Mac.
Ad
d
Troub
l
Incorrec
you thin
k
the item
s
instructi
support
pioneer
d
Someti
m
the othe
problem
service
c
This uni
t
external
turning
t
on.
Abou
t
trade
m
Pioneer
under li
c
Window
s
United
S
macOS,
the U.S.
Intel an
d
and/or o
Adobe a
the U.S.
Serato
D
The names
o
trademarks
Cauti
o
Recordings
according t
o
copyright h
o
Music r
e
of indivi
d
respons
i
that it is
When h
a
full resp
o
ensure t
with the
Speci
f
AC adapt
e
Power.........
Rated curre
n
Rated outp
u
General
–
Main unit w
e
Max. extern
a
.............
Tolerable o
p
Tolerable o
p
Audio Se
c
Sampling r
a

15
English
En
unctions
r
espective
P
ro software
m
the
n
ual (p.
m “Serato.
a
re manual
g
the
y
ou want to
it’s rear
Additional information
Troubleshooting
Incorrect operation is often mistaken for trouble or malfunction. If
you think that there is something wrong with this component, check
the items in the “Troubleshooting” section of this unit’s operating
instructions and the [FAQ] for the [DDJ-SX3] on the Pioneer DJ
support site.
pioneerdj.com/support/
Sometimes the problem may lie in another component. Inspect
the other components and electrical appliances being used. If the
problem cannot be rectified, ask your nearest Pioneer authorized
service center or your dealer to carry out repair work.
This unit may not operate properly due to static electricity or other
external influences. In this case, proper operation may be restored by
turning the power off, waiting 1 minute, then turning the power back
on.
About trademarks and registered
trademarks
Pioneer DJ is a trademark of PIONEER CORPORATION, and is used
under license.
Windows is a registered trademark of Microsoft Corporation in the
United States and other countries.
macOS, OS X and Finder are trademarks of Apple Inc., registered in
the U.S. and other countries.
Intel and Intel Core are trademarks of Intel Corporation in the U.S.
and/or other countries.
Adobe and Reader are trademarks of Adobe Systems Incorporated in
the U.S. and other countries.
Serato DJ Pro is a registered trademark of Serato Limited.
The names of companies and products mentioned herein are the
trademarks of their respective owners.
Cautions on copyrights
Recordings you have made are for your personal enjoyment and
according to copyright laws may not be used without the consent of the
copyright holder.
Music recorded from CDs, etc., is protected by the copyright laws
of individual countries and by international treaties. It is the full
responsibility of the person who has recorded the music to ensure
that it is used legally.
When handling music downloaded from the Internet, etc., it is the
full responsibility of the person who has downloaded the music to
ensure that it is used in accordance with the contract concluded
with the download site.
Specifications
AC adapter
Power............................................................AC 100 V to 240 V, 50 Hz/60 Hz
Rated current .....................................................................................800 mA
Rated output................................................................................. DC 5 V, 3 A
General – Main Unit
Main unit weight ...................................................................................6.1 kg
Max. external dimensions (W × D × H)
.........................................................664.0 mm × 354.4 mm × 70.4 mm
Tolerable operating temperature ........................................ +5 °C to +35 °C
Tolerable operating humidity ......................5 % to 85 % (no condensation)
Audio Section
Sampling rate....................................................................................44.1 kHz
A/D, D/A converter...............................................................................24 bits
Frequency characteristic
USB, LINE, MIC............................................................... 20 Hz to 20 kHz
S/N ratio (rated output, A-WEIGHTED)
USB................................................................................................ 107 dB
LINE ................................................................................................. 96 dB
PHONO............................................................................................ 87 dB
MIC .................................................................................................. 80 dB
Total harmonic distortion (20 Hz to 20 kHzBW)
USB...............................................................................................0.003 %
LINE ..............................................................................................0.005 %
Standard input level / Input impedance
LINE .................................................................................. –12 dBu/47 k
PHONO.............................................................................–52 dBu/47 k
MIC .....................................................................................–57 dBu/3 k
Standard output level / Load impedance / Output impedance
MASTER OUT 1.....................................................+6 dBu/10 k/390 
MASTER OUT 2.......................................................+2 dBu/10 k/1 k
BOOTH OUT..........................................................+6 dBu/10 k/390 
PHONE .......................................................................+4 dBu/32 /32 
Rated output level / Load impedance
MASTER OUT 1.................................................................24 dBu/10 k
MASTER OUT 2.................................................................20 dBu/10 k
BOOTH OUT...................................................................... 24 dBu/10 k
Crosstalk
LINE ................................................................................................. 82 dB
Channel equalizer characteristic
HI .....................................................................–26 dB to +6 dB (13 kHz)
MID....................................................................–26 dB to +6 dB (1 kHz)
LOW ..................................................................–26 dB to +6 dB (70 Hz)
Input / Output terminals
LINE input terminal
RCA pin jack.................................................................................... 2 sets
LINE/PHONO input terminals
RCA pin jack.................................................................................... 2 sets
MIC1 terminal
XLR connector/phone jack (Ø6.3 mm) ...........................................1 set
MIC2 terminal
XLR connector...................................................................................1 set
MIC3 terminal
Phone jack (Ø6.3 mm).....................................................................1 set
MASTER OUT 1 output terminal
XLR connector...................................................................................1 set
MASTER OUT 2 output terminal
RCA pin jacks....................................................................................1 set
BOOTH OUT output terminal
Phone jack (Ø6.3 mm).....................................................................1 set
HEADPHONES output terminal
Stereo phone jack (Ø6.3 mm) .........................................................1 set
Stereo mini phone jack (Ø3.5 mm).................................................1 set
USB terminal
B type...............................................................................................2 sets
For improvement purposes, specifications and design of this unit
and the included software are subject to change without notice.
©2018 Pioneer DJ Corporation. All rights reserved.

2Es
PRECAUCI
Ó
N
PARA PREVENIR EL PELIGRO DE CHOQUE ELÉCTRICO
NO REMOVER LA TAPA NI LAS PARTES DENTRO NO
UTILIZADAS, LLAMAR UNA PERSONA CUALIFICADA.
D3-4-2-1-1_B2_Es
ADVERTENCIA
Este aparato no es impermeable. Para evitar el riesgo
de incendio y de descargas eléctricas, no ponga ningún
recipiente lleno de líquido (como pueda ser un vaso o
un florero) cerca del aparato ni lo exponga a goteo,
salpicaduras, lluvia o humedad. D3-4-2-1-3_A1_Es
ADVERTENCIA
Para evitar el peligro de incendio, no ponga nada con
fuego encendido (como pueda ser una vela) encima del
aparato. D3-4-2-1-7a_A1_Es
ADVERTENCIA
Guarde las piezas pequeñas fuera del alcance de los
niños. Si las ingirieran accidentalmente, póngase de
inmediato en contacto con un médico.
D41-6-4_A1_Es
PRECAUCIÓN
El interruptor de la alimentación STANDBY/ON de
este aparato no corta por completo toda la
alimentación de la toma de corriente de CA. Puesto
que el cable de alimentación hace las funciones de
dispositivo de desconexión de la corriente para el
aparato, para desconectar toda la alimentación del
aparato deberá desenchufar el cable de la toma de
corriente de CA. Por lo tanto, asegúrese de instalar el
aparato de modo que el cable de alimentación pueda
desenchufarse con facilidad de la toma de corriente
de CA en caso de un accidente. Para evitar correr el
peligro de incendio, el cable de alimentación también
deberá desenchufarse de la toma de corriente de CA
cuando no se tenga la intención de utilizarlo durante
mucho tiempo seguido (por ejemplo, antes de irse de
vacaciones).
D3-4-2-2-2a*_A1_Es
Entorno de funcionamiento
T
emperatura y humedad del entorno de funcionamiento
+5 °C a +35 °C; menos del 85 % de humedad relativa
(rejillas de refrigeración no obstruidas)
No instale este aparato en un lugar mal ventilado, ni en
lugares expuestos a alta humedad o a la luz directa del
sol (o de otra luz artificial potente).
D3-4-2-1-7c*_A1_Es
Cuando utilice este producto, confirme la
información de seguridad mostrada en la parte
inferior de la unidad. D3-4-2-2-4_B1_Es
PRECAUCIÓN PARA LA VENTILACIÓN
Cuando instale este aparato, asegúrese de dejar
espacio en torno al mismo para la ventilación con el fin
de mejorar la disipación de calor (por lo menos 5 cm en
la parte superior, 5 cm detrás y 5 cm en cada lado).
D3-4-2-1-7d*_A1_Es
El símbolo gráfico colocado en el producto
significa corriente alterna.
El símbolo gráfico colocado en el producto
significa corriente continua.
El símbolo gráfico colocado en el producto
significa equipo de Clase II.
D3-8-2-4_A1_Es
PRECAUCIÓN
Este producto se evalúa en un entorno climático
tropical y moderado.
D3-8-2-1-7a_A1_Es
Co
n
Cómo lee
r
Gracias por
Este ma
n
de esta
u
obtener
“Manual
Tenga e
n
que se d
las espe
c
desarrol
Tenga e
n
la confi
g
variar d
e
Tenga e
n
en esta
g
Este manua
las partes d
e
periféricos.
P
esta unidad
,
Para sa
b
consult
e
Antes
Caracte
r
Conteni
d
Adquisi
c
Instalaci
Acerca
d
Nomb
Sección
Sección
Sección
Sección
Panel tr
a
Panel fr
o
Cone
x
Repro
Cambio
d
Cierre d
e
Infor
m
Solució
n
Acerca
d
Cuidado
s
Especifi
c

3
Español
Es
e
los
e
de
-
6-4_A1_Es
O
Nde
e
sto
s
de
el
del
a
de
a
lar el
p
ueda
i
ente
r
er el
mbién
d
e CA
rante
r
se de
a
*_A1_Es
4
_B1_Es
o
7
a_A1_Es
Contenido
Cómo leer este manual
Gracias por haber comprado este producto de Pioneer DJ.
Este manual explica brevemente los procedimientos de conexión
de esta unidad a un PC/Mac a través de la salida de sonido. Para
obtener más detalles sobre cómo usar esta unidad, consulte el
“Manual de instrucciones” en el sitio web de Pioneer DJ.
Tenga en cuenta que las pantallas y especificaciones de software
que se describen en esta guía, así como la apariencia exterior y
las especificaciones del hardware se encuentran actualmente en
desarrollo y podrían ser distintas de las especificaciones finales.
Tenga en cuenta que, en función de la versión del sistema operativo,
la configuración del navegador web, etc., el funcionamiento puede
variar del indicado en los procedimientos descritos en este manual.
Tenga en cuenta que el idioma de las pantallas del software descrito
en esta guía puede variar del idioma de sus pantallas.
Este manual proporciona descripciones breves de los nombres de
las partes de esta unidad y de las conexiones entre la unidad y los
periféricos. Para obtener instrucciones más detalladas sobre el uso de
esta unidad, consulte el Manual de instrucciones de esta unidad.
Para saber cómo obtener el Manual de instrucciones de esta unidad,
consulte Visualización del Manual de instrucciones en la página 4.
Antes de empezar a usar la unidad ...........................4
Características.............................................................................................4
Contenido de la caja.................................................................................... 4
Adquisición del manual.............................................................................. 4
Instalación del software..............................................................................4
Acerca del adaptador de CA.......................................................................6
Nombres de las partes..................................................8
Sección del navegador................................................................................ 8
Sección del deck..........................................................................................8
Sección de mezclador.................................................................................9
Sección de efectos ......................................................................................9
Panel trasero.............................................................................................. 10
Panel frontal...............................................................................................10
Conexión de dispositivos a la unidad.....................11
Reproducción de música con Serato DJ Pro........12
Cambio de los ajustes ...............................................................................14
Cierre del sistema......................................................................................14
Información adicional ................................................15
Solución de problemas .............................................................................15
Acerca de marcas comerciales y marcas comerciales registradas.....15
Cuidados para los derechos de autor...................................................... 15
Especificaciones........................................................................................15

4Es
Antes de empezar a usar la unidad
Características
Esta unidad es un controlador DJ todo en uno diseñada específicamente
para el uso con el software DJ “Serato DJ Pro” de Serato Limited.
Las interfaces de actuación, como “PERFORMANCE PADS”,
“4-CHANNEL MIXER”, etc., están dispuestas cómodamente para
controlar las funciones que se incluyen en “Serato DJ Pro”.
Asimismo, esta unidad está equipada con gran número de terminales de
entrada y salida que corresponden a una gran variedad de estilos de DJ.
También está diseñada para ofrecer una sensación de calidad idónea
para diversos escenarios, como clubs nocturnos o fiestas particulares.
Contenido de la caja
Adaptador de CA
Clavija de alimentación
Cable USB1
Manual de instrucciones (Guía de inicio rápido) (Este documento)
Serato DJ Pro EXPANSION PACK VOUCHER2
1Solo se suministra un cable USB con esta unidad. Si utiliza dos
cables, use un cable USB compatible con USB 2.0.
2Tenga en cuenta que el EXPANSION PACK VOUCHER de Serato DJ
Pro no puede volver a emitirse. Deberá utilizar el código de cupón
para activar el paquete de expansión. Asegúrese de guardarlo en un
lugar seguro de modo que no lo pueda perder.
Adquisición del manual
A veces, algunas instrucciones se proporcionan como archivos en
formato PDF. Debe tener instalado Adobe®Reader®para ver archivos
con formato PDF.
Visualización del Manual de instrucciones
1 Inicie un navegador Web en un PC/Mac y acceda al
sitio de Pioneer DJ que aparece a continuación.
pioneerdj.com
Para seleccionar su idioma, haga clic en el icono de bandera que
aparece en la parte superior derecha de la pantalla.
2 Señale con el cursor en [Soporte].
3 Haga clic en [Tutoriales, manuales y documentación].
4 Haga clic en [DDJ-SX3] en [CONTROLADORES DJ].
5 Seleccione el idioma del manual de la lista.
Descargue el manual si lo necesita.
Descarga del manual del software Serato
DJ Pro
1 Acceda al sitio web de Serato.
http://serato.com/
2 Haga clic en [Serato DJ Pro] en [PRODUCT].
3 Haga clic en [DOWNLOAD SERATO DJ PRO].
4 Haga clic en [Manuals and Downloads].
5 Haga clic en el manual del software Serato DJ Pro del
idioma que necesite.
Instalación del software
Antes de instalar el software
El software Serato DJ Pro y el software del controlador no están
incluidos.
Acceda al sitio de soporte de Pioneer DJ y descargue el software.
pioneerdj.com/support/
El usuario es responsable de preparar el PC/Mac, los dispositivos
de red y otros elementos del entorno de uso de Internet necesarios
para conectarse a Internet.
Descarga del software controlador
1 Inicie un navegador Web en un PC/Mac y acceda al
sitio de Pioneer DJ.
pioneerdj.com
Para seleccionar su idioma, haga clic en el icono de bandera que
aparece en la parte superior derecha de la pantalla.
2 Señale con el cursor en [Soporte].
3 Haga clic en [Actualización de Software y firmware].
4 Haga clic en [DDJ-SX3] en [CONTROLADORES DJ].
5 Haga clic en [Drivers].
6 Haga clic en [Link de descarga] y, a continuación,
guarde el archivo.
Acerca del software Serato DJ Pro
Serato DJ Pro es una aplicación de software DJ de Serato Limited. Es
posible realizar actuaciones de DJ conectando el PC/Mac en el que se
instale este software a esta unidad.
Entorno operativo mínimo
Sistemas operativos
compatibles CPU y memoria necesaria
Mac: macOS High
Sierra 10.13/Sierra 10.12
(actualización más
reciente), OS X 10.11
(actualización más
reciente)
Procesador Intel®Core™i5 y i7
1,07 GHz o superior
RAM de 4 GB o más
Windows®10 /
Windows®8.1 /
Windows®7
(service Pack más
reciente)
Versión de
32 bits
Procesador Intel®Core™i5 y i7
1,07 GHz o superior
RAM de 4 GB o más
Versión de
64 bits
Procesador Intel®Core™i5 y i7
1,07 GHz o superior
RAM de 4 GB o más
Otros
Puerto USB Para conectar el PC/Mac con esta unidad se requiere
un puerto USB 2.0.
Resolución de la
pantalla Resolución de 1 280 × 720 o superior
Conexión a Internet Se necesita acceso a Internet para registrar la cuenta
de usuario de “Serato.com” y descargar el software.
Para obte
compatib
de “DDJ-
S
pioneerdj
.
En cuant
o
reciente.
La operac
condicio
n
En funció
posible q
u
procesa
m
que el or
d
un alto re
n
alimenta
c
Para usar
servicios
d
Obten
c
1 Acced
a
http://serat
o
2 Haga
c
Se visualiza
La p
á
3 Haga
c
4 Cree u
n
Si y
a
al p
a
Si n
o
sigu
i
—
S
d
a
—
S
S
i
n
—
C
r
d
c
“
S
No o
espe
que
l
La in
usu
a
en l
a
5 Haga
c
electróni
c
Le llevará a
l
6 Inicie l
a
Introduzca l
a
registrado p
7 Desca
r
de desca
r
Proce
d
No conect
e
Inicie la
del PC a
Si hay o
t
1 Desco
m
(Pioneer_
2 Haga
d

5
Español
Es
s
tán
w
are.
s
positivos
n
ecesarios
e
da al
b
andera que
m
ware].
S
DJ].
c
ión,
m
ited. Es
el que se
s
aria
5
y i7
5
y i7
5
y i7
s
e requiere
a
r la cuenta
s
oftware.
Para obtener información sobre los requisitos más actuales del sistema, la
compatibilidad y los sistemas operativos compatibles, consulte “Software Info”
de “DDJ-SX3” en el sitio de soporte de Pioneer DJ siguiente.
pioneerdj.com/support/
En cuanto a sistemas operativos, use la última versión y el service pack más
reciente.
La operación no se garantiza en todos los PC/Mac, aunque se cumplan todas las
condiciones indicadas aquí para el entorno de operación necesario.
En función de la configuración de ahorro de energía, etc. del PC/Mac, es
posible que la CPU y el disco duro no tengan la suficiente capacidad de
procesamiento. En el caso concreto de PC portátiles y MacBooks , asegúrese de
que el ordenador se encuentra en las condiciones adecuadas para proporcionar
un alto rendimiento constante (por ejemplo, manteniendo conectada la
alimentación de CA) al usar Serato DJ Pro.
Para usar Internet se necesita un contrato independiente con un proveedor de
servicios de Internet, así como pagar las tarifas del proveedor.
Obtención del software Serato DJ Pro
1 Acceda al sitio web de Serato.
http://serato.com/
2 Haga clic en [Serato DJ] en [DJ PRODUCTS].
Se visualiza la página de descarga de Serato DJ Pro.
La página de descarga está sujeta a cambios.
3 Haga clic en [DOWNLOAD SERATO DJ].
4 Cree una cuenta de “Serato.com”.
Si ya ha registrado una cuenta de usuario en “Serato.com”, vaya
al paso 6.
Si no ha terminado de registrar su cuenta de usuario, realice el
siguiente procedimiento.
—Siga las instrucciones de la pantalla, introduzca su dirección
de correo electrónico y la contraseña que quiera establecer y,
a continuación, seleccione la región en la que vive.
—Si selecciona la casilla [E-mail me Serato newsletters],
Serato Limited le enviará boletines de noticias con la
información más reciente de los productos de Serato Limited.
—Cuando se complete el registro de la cuenta del usuario,
recibirá un mensaje de correo electrónico en la dirección
de correo electrónico que haya introducido. Compruebe el
contenido del correo electrónico enviado desde
“Serato.com”.
No olvide la dirección de correo electrónico y la contraseña
especificada cuando realiza el registro del usuario. Es posible
que las necesite para actualizar el software.
La información personal introducida al registrar una cuenta de
usuario nueva puede recopilarse, procesarse y usarse basándose
en la política de privacidad del sitio Web de Serato Limited.
5 Haga clic en el vínculo en el mensaje de correo
electrónico enviado desde “Serato.com”.
Le llevará a la página de descarga de Serato DJ Pro.
6 Inicie la sesión.
Introduzca la dirección de correo electrónico y la contraseña que ha
registrado para iniciar la sesión en “Serato.com”.
7 Descargue el software Serato DJ Pro desde la página
de descarga.
Procedimiento de instalación (Windows)
No conecte esta unidad y el PC hasta completar la instalación.
Inicie la sesión con el usuario que se estableció como administrador
del PC antes de la instalación.
Si hay otros programas ejecutándose en el PC, ciérrelos.
1 Descomprima el software del controlador descargado
(Pioneer_DDJSX3_X.XXX.).
2 Haga doble clic sobre [DDJ-SX3_X.XXX.exe].
3 Proceda con la instalación según las instrucciones de
la pantalla.
Si aparece en la pantalla [Seguridad de Windows] mientras que la
instalación está en curso, haga clic en [Instalar este software de
controlador de todas formas] y siga con la instalación.
Cuando se complete la instalación del programa se mostrará un
mensaje que confirma la finalización de la instalación.
Tras instalar el software controlador, realice la instalación del software
Serato DJ Pro.
4 Descomprima el archivo de software Serato DJ Pro
descargado.
5 Haga doble clic en el archivo de software
descomprimido para iniciar el instalador.
6 Lea atentamente los términos del acuerdo de
licencia y, si los acepta, seleccione [I agree to the license
terms and conditions] y, a continuación, haga clic en
[Install].
Si no acepta el acuerdo de licencia, haga clic en [Close] para
cancelar la instalación.
El mensaje de instalación correcta aparece al completar la instalación.
7 Haga clic en [Close] para salir del instalador de Serato
DJ Pro.
Procedimiento de instalación (Mac)
No conecte esta unidad y el Mac hasta completar la instalación.
Si hay otros programas ejecutándose en el Mac, ciérrelos.
1 Descomprima el software del controlador descargado
(DDJSX3_M_X.X.X.zip).
2 Haga doble clic sobre [DDJ-SX3_M_X.X.X.dmg].
3 Haga doble clic sobre [DDJ-SX3_AudioDriver.pkg].
4 Siga las instrucciones de instalación que aparecen.
5 Descomprima el archivo de software Serato DJ Pro
descargado.
6 Haga doble clic en el archivo de software
descomprimido para iniciar el instalador.
7 Lea atentamente los términos del acuerdo de
licencia y, si los acepta, seleccione [Agree].
Si no acepta el contenido acuerdo de uso, haga clic en
[Disagree] para cancelar la instalación.
8 Haga clic en [Install].
9 Siga las instrucciones de instalación que aparecen.
10 Haga clic en [Close] para cerrar el instalador.

6Es
Acerca de la instalación del software
controlador en macOS High Sierra 10.13
Para macOS High Sierra 10.13, se ha añadido una nueva función de
seguridad.
Al instalar el software controlador de Pioneer DJ en macOS High
Sierra 10.13, se necesitará autentificar el software controlador. Siga el
procedimiento indicado a continuación.
Los procedimientos siguientes son necesarios al instalar por primera
vez el software controlador en macOS High Sierra 10.13.
Si el software controlador ya se ha instalado en macOS o OS X antes
de actualizar a macOS High Sierra 10.13, no serán necesarios los
procedimientos siguientes.
Al instalar el software controlador de Pioneer DJ en macOS High Sierra
10.13, aparecerá la siguiente pantalla.
Haga clic en [OK].
Tras permitir la instalación del software controlador, se completará la
instalación del software controlador.
1 Abra [System Preferences] y, a continuación, haga clic
en [Security & Privacy].
2 Compruebe que aparece el mensaje [System software
from developer “Pioneer DJ Corporation” was blocked
from loading.] en la pantalla inferior.
Este mensaje se mostrará durante 30 minutos tras el inicio de la
instalación del software controlador.
Si no aparece, repita el procedimiento de instalación del software
controlador.
3 Haga clic en [Allow] en la pantalla inferior derecha.
4 Si el equipo de DJ está conectado al Mac, desconecte
el cable USB y conéctelo de nuevo.
Acerca del adaptador de CA
Instrucciones de seguridad
No use esta unidad con una moneda, clip para papel u otro objeto de
metal metido entre el adaptador de CA y la clavija de alimentación.
Hacer esto podría causar un cortocircuito, lo que podría producir un
incendio o una descarga eléctrica.
Cuando monte el adaptador de CA en una toma de corriente de
pared, asegúrese de que quede espacio entre el adaptador de CA
y la toma de corriente. Un contacto defectuoso o una moneda, clip
para papel u otro objeto metálico metido en el espacio podría causar
un cortocircuito, lo que podría producir un incendio o una descarga
eléctrica.
Moneda, clip para papel u otro objeto metálico
Superior
Cara
La clavija de alimentación podría separarse del adaptador de CA y
quedar en la toma de corriente si alguien tropieza con el cable de
alimentación del adaptador de CA o si algo golpea el adaptador de
CA. Si pasa esto, desconecte la clavija de alimentación de la toma de
corriente con las manos secas, sujetándola como se muestra en el
diagrama de abajo y sin tocar las partes metálicas. No use ninguna
herramienta para desconectarla.
No toque.
Monta
j
Deslice la
guía de l
a
en el dia
g
oiga un c
l
Desco
n
Mientras
adaptad
o
alejándol
a
diagrama
Una vez mo
n
desconecta
r
Clavij
a
Este produc
t
más abajo.
U
región en q
u
Tipo 1 (p
a
utiliza la
c
Tipo 2
Tipo 3 (p
a
regiones
e