
2
1234
1234
C
D
F
A
B
E
S-W1EX
Ref. Part No.
No. Mark Symbol and Description S-W1EX S-W1EX Remarks
/LFXTW /KUCXTW
<PCB ASSEMBLIES>
1..AMP COMPLEX ASSY AWM7899 AWM7900
P13-1 2..INPUT ASSY AWU8173 AWU8175
1..SMPS COMPLEX ASSY AWM7895 AWM7897
P13-7 2..SMPS ASSY AWU8163 AWU8165
<PACKING>
P7-1 NSP Accessory Set SEA6054 SEA6055
P7-2 >Power Cable ADG7097 ADG7021
P7-12 Carton Box SHG6119 SHG6121
P7-13 Operating Instructions SRD6032 SRD6034
(English, Trad-Chinese)
P7-15 NSP Accessory Set SME6076 SME6077
NSP Warranty Card Not used ARY7045 No.1
NSP Label Serial Not used SRW1112 No.2
<EXTERIOR SECTION>
P9-30 NSP Amplifier Assy AXW7007 AXW7009
NSP Caution Label Not used DRW1975 No.3
<SPEAKER SECTION>
P11-1 NSP Connection Cord SDF1106 SDF6010
<AMPLIFIER ASSY>
P13-14 AC Inlet Assy AKP7197 AKP7205
P13-19 Rear Sheet AAK8310 AAK8316
P13-45 NSP Model Label SAN6293 SAN6295
NSP Label Serial Not used SRW1111 No.4
1. CONTRAST OF MISCELLANEOUS PARTS
1.1 CONTRAST OF TABLE
S-W1EX/KUCXTW and /LFXTW types are constructed the same except for the following:
Notes : ÷The numbers in the remarks column correspond to the numbers on the “ EXPLODED VIEWS ”.
÷For PCB ASSEMBLIES, Refer to “CONTRAST OF PCB ASSEMBLIES” and “2. SCHEMATIC DIAGRAM”.
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
561
473
R50
1R0
5621
NOTES:
560 Ω
47k Ω
0.5 Ω
1 Ω
RD1/4PU J
RD1/4PU J
RN2H K
RS1P K
56 x10
1
47 x10
3
R50
1R0
561
473
5.62k Ω
RN1/4PC F562 x10
1
5621