Pioneer KEH-P7035 User manual

Operation Manual
Multi-CD control High power Cassette player with FM/
AM tuner
KEH-P7035
English Português (B)Español
All manuals and user guides at all-guides.com
all-guides.com

Thank you for buying this Pioneer product.
Please read through these operating instructions so you will know how to operate
your model properly. After you have finished reading the instructions, put them away
in a safe place for future reference.
Before You Start
About this manual 4
Precautions 4
Use and care of the remote control 4
Installing the battery 4
Using the remote control 4
Protecting your unit from theft 5
Removing the front panel 5
Attaching the front panel 5
About the demo mode 5
Reverse mode 6
Feature demo 6
Whats What
Head unit 7
Remote control 8
Power O /OFF
Turning the unit on 9
electing a source 9
Turning the unit off 9
Tuner
Listening to the radio 10
Introduction of advanced tuner
operation 11
toring and recalling broadcast
frequencies 11
Tuning in strong signals 11
toring the strongest broadcast
frequencies 12
Cassette Player
Playing a tape 13
Introduction of advanced cassette player
operation 14
Repeating play 14
kipping blank tape sections 15
Radio intercept 15
Using Dolby noise reduction 15
Multi-CD Player
Playing a CD 16
50-disc multi-CD player 16
Introduction of advanced multi-CD player
operation 17
Repeating play 17
Playing tracks in a random order 17
canning CDs and tracks 18
Pausing CD playback 18
Using IT playlists 18
Creating a playlist with IT
programming 18
Playback from your IT playlist 19
Erasing a track from your IT
playlist 19
Erasing a CD from your IT
playlist 19
Using disc title functions 20
Entering disc titles 20
Displaying disc titles 21
electing discs from the disc title
list 21
Using CD TEXT functions 21
Displaying titles on CD TEXT
discs 21
crolling titles in the display 21
Using compression and bass emphasis 21
Audio Adjustments
Introduction of audio adjustments 23
etting the sound focus equalizer
( FEQ) 23
Using balance adjustment 24
Using the equalizer 24
Recalling equalizer curves 24
Adjusting equalizer curves 25
Fine adjusting equalizer curve 25
Contents
En
2
All manuals and user guides at all-guides.com

Adjusting bass 26
Adjusting treble 26
Adjusting loudness 26
Using subwoofer output 26
Adjusting subwoofer settings 27
Using non fading output 27
Adjusting non fading output level 27
Using the high pass filter 27
Adjusting source levels 28
Using automatic sound levelizer 28
Initial Settings
Adjusting initial settings 29
etting the clock 29
etting the FM tuning step 29
etting the AM tuning step 30
witching the warning tone 30
witching the auxiliary setting 30
witching the dimmer setting 30
Adjusting the brightness 30
etting the rear output and subwoofer
controller 31
witching the telephone muting/
attenuation 31
Other Functions
Turning the clock display on or off 32
Using the AUX source 32
electing AUX as the source 32
etting the AUX title 32
Using different entertainment displays 33
Additional Information
Cassette tapes 34
Cleaning the playback head 34
Music search and repeat functions during
tape playback 34
pecifications 35
En 3
English
Contents
All manuals and user guides at all-guides.com

About this manual
This unit features a number of sophisticated
functions ensuring superior reception and op-
eration. All the functions have been designed
for the easiest possible use, but many are not
self-explanatory. This operation manual will
help you benefit fully from this productspo-
tential and to maximize your listening enjoy-
ment.
We recommend that you familiarize yourself
with the functions and their operation by read-
ing through the manual before you begin
using this unit. It is especially important that
you read and observe precautions on this
page and in other sections.
Precautions
!Keep this manual handy as a reference for
operating procedures and precautions.
!Always keep the volume low enough so you
can hear sounds outside of the car.
!Protect this product from moisture.
!If the battery is disconnected or dis-
charged, the preset memory will be erased
and must be reprogrammed.
!If this unit does not operate properly, con-
tact your dealer or nearest authorized Pio-
neer ervice tation.
Use and care of the remote
control
Installing the battery
lide the tray out on the back of the remote
control and insert the battery with the plus (+)
and minus () poles pointing in the proper di-
rection.
WAR I G
Keep the battery out of the reach of children.
hould the battery be swallowed, immediately
consult a doctor.
CAUTIO
!Use only one CR2025 (3 V) lithium battery.
!Remove the battery if the remote control is not
used for a month or longer.
!Do not recharge, disassemble, heat or dispose
of the battery in fire.
!Do not handle the battery with metallic tools.
!Do not store the battery with metallic materi-
als.
!In the event of battery leakage, wipe the re-
mote control completely clean and install a
new battery.
!When disposing of used batteries, please
comply with governmental regulations or en-
vironmental public institutions rules that
apply in your country/area.
Using the remote control
Point the remote control in the direction of the
front panel to operate.
Before You Start
En
4
Section
01
HHHHHHHHHHHHHH
All manuals and user guides at all-guides.com

Important
!Do not store the remote control in high tem-
peratures or direct sunlight.
!The remote control may not function properly
in direct sunlight.
!Do not let the remote control fall onto the
floor, where it may become jammed under the
brake or accelerator pedal.
Protecting your unit from
theft
The front panel can be detached from the
head unit and stored in the protective case
provided to discourage theft.
!If the front panel is not detached from the
head unit within five seconds of turning off
the ignition, a warning tone will sound.
!You can turn off the warning tone. ee
Switching the warning tone on page 30.
Important
!Never use force or grip the display and the
buttons tightly when removing or attaching.
!Avoid subjecting the front panel to excessive
shocks.
!Keep the front panel out of direct sunlight and
high temperatures.
Removing the front panel
1 Press OPEN to open the front panel.
2 Grip the left side of the front panel and
pull it gently outward.
Take care not to grip it tightly or drop it.
3 Put the front panel into the protective
case provided for safe keeping.
Attaching the front panel
%Replace the front panel by holding it
upright to this unit and clipping it securely
into the ounting hooks.
About the demo mode
This unit features two demonstration modes.
One is the reverse mode, the other is the fea-
ture demo mode.
!You cannot cancel a demo mode when the
front panel is open.
Important
The red lead (ACC) of this unit should be con-
nected to a terminal coupled with ignition switch
on/off operations. If this is not done, the vehicle
battery may be drained.
Before You Start
En 5
English
Section
01
HHHHHHHHHHHHHH
All manuals and user guides at all-guides.com

Reverse mode
If you do not perform an operation within
about 30 seconds, screen indications start to
reverse, and then continue reversing every 10
seconds. Pressing 5numbered button when
power to this unit is turned off while the igni-
tion switch is set to ACC or ON cancels the re-
verse mode. Pressing 5numbered button
again to start the reverse mode.
Feature demo
The feature demo automatically starts when
power to this unit is turned off while the igni-
tion switch is set to ACC or ON. Pressing 6
numbered button during feature demo opera-
tion cancels the feature demo mode. Pressing
6numbered button again to start the feature
mode. Remember that if the feature demo
continues operating when the car engine is
turned off, it may drain battery power.
Before You Start
En
6
Section
01
HHHHHHHHHHHHHH
All manuals and user guides at all-guides.com
all-guides.com

Head unit
1CLOCK button
Press to change to the clock display.
2VOLUME
When you press VOLUME, it extends out-
ward so that it becomes easier to turn. To re-
tract VOLUME, press it again. Rotate to
increase or decrease the volume.
3DISPLAY button
Press to select different displays.
4ATT button
Press to quickly lower the volume level, by
about 90%. Press once more to return to the
original volume level.
5FUNCTION button
Press to select functions.
6AUDIO button
Press to select various sound quality con-
trols.
7OPEN button
Press to open the front panel.
8a/b/c/dbuttons
Press to do manual seek tuning, fast for-
ward, reverse and track search controls.
Also used for controlling functions.
9BAND button
Press to select among three FM and one
AM bands and cancel the control mode of
functions.
aSFEQ button
Press to select a natural sound with pre-
sence.
b16 buttons
Press for preset tuning and disc number
search when using a multi-CD player.
cENTERTAINMENT button
Press to change to the entertainment dis-
play.
dEQ button
Press to select various equalizer curves.
8
12
5
7
9
ba
c
e
d
34
6
hats hat
En 7
English
Section
02
HHHHHHHHHHHHHH
All manuals and user guides at all-guides.com

eSOURCE button
This unit is turned on by selecting a source.
Press to cycle through all of the available
sources.
Remote control
Operation is the same as when using the but-
ton on the head unit.
fVOLUME button
Press to increase or decrease the volume.
gCD button
Press to select the multi-CD player as the
source.
hCASSETTE button
Press to select the cassette player as the
source.
iTUNER button
Press to select the tuner as the source.
4
8
6
g
5
f
h
i
9
hats hat
En
8
Section
02
HHHHHHHHHHHHHH
All manuals and user guides at all-guides.com

Turning the unit on
%Press SOURCE to turn the unit on.
When you select a source the unit is turned
on.
Selecting a source
You can select a source you want to listen to.
To switch to the cassette player, load a cas-
sette tape in this unit (refer to page 13).
%When using the head unit, press
SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
CD playerTelevisionTunerCassette
playerMulti-CD playerExternal unit 1
External unit 2AUX
%When using the re ote control, press
TUNER, CASSETTE or CD to select a source.
Press each button repeatedly to switch be-
tween the following sources:
TUNER:TelevisionTunerSources off
CASSETTE:Cassette playerAUXSources
off
CD:CD playerMulti-CD playerSources
off
otes
!In the following cases, the sound source will
not change:
When a unit corresponding to each source
is not connected to this unit.
When no cassette is set in this unit.
When no magazine is set in the multi-CD
player.
When no disc is set in the CD player.
When the AUX (auxiliary input) is set to off
(refer to page 30).
!External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
!When this units blue/white lead is connected
to the cars auto-antenna relay control term-
inal, the cars antenna extends when this
units source is turned on. To retract the an-
tenna, turn the source off.
Turning the unit off
%Press SOURCE and hold until the unit
turns off.
Power ON/OFF
En 9
English
Section
03
HHHHHHHHHHHHHH
All manuals and user guides at all-guides.com

Listening to the radio
4
5
1
3
2
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
Important
If you are using this unit in North, Central or
outh America, reset the AM tuning step (see
Setting the AM tuning step on page 30).
1Stereo (ST) indicator
hows that the frequency selected is being
broadcast in stereo.
2LOC indicator
hows when local seek tuning is on.
3Band indicator
hows which band the radio is tuned to, AM
or FM.
4Preset nu ber indicator
hows what preset has been selected.
5Frequency indicator
hows to which frequency the tuner is
tuned.
1 Press SOURCE to select the tuner.
Press SOURCE until you see Tuner displayed.
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Press BAND to select a band.
Press BAND until the desired band is dis-
played, FM1,FM2,FM3 for FM or AM.
4 To perfor anual tuning, press cor
dwith quick presses.
The frequencies move up or down step by
step.
5 To perfor seek tuning, press and hold
cor dfor about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#You can cancel seek tuning by pressing either
cor dwith a quick press.
#If you press and hold cor dyou can skip
broadcasting stations. eek tuning starts as soon
as you release the buttons.
ote
When the frequency selected is being broadcast
in stereo the stereo (ST) indicator will light.
Tuner
En
10
Section
04
HHHHHHHHHHHHHH
All manuals and user guides at all-guides.com