Piranha Maxi DC001-D User manual

Maxi Vacuum Cleaner
For Household Use Only
Model No. DC001-D
Item No.: 900153
220 - 240Va.c. 50Hz
2400W Max
Rev 1
Note: The specifications and/or components of this appliance are subject to change without prior notice.
If the Hose, Floor Head or any Accessories should fail during use, please call 1800 079 124 for an immediate
replacement. This will save you from returning the product to the store.
If we can assist you in any other way, please feel free to contact us

Page 2 of 15
1Warnings..................................................................................3
2Safety Direction.......................................................................3
3Transporting your Vacuum ....................................................5
4Components............................................................................6
5Assembly Method ...................................................................7
5.1Fitting Flexible Hose ................................................................. 7
5.2Hose Removal............................................................................ 7
5.3Fitting Telescopic Tube and Accessories............................... 7
5.3.1The Tools .........................................................................................8
5.3.2Tool Holder ......................................................................................8
6Power and Cord.......................................................................8
7Floor Head ...............................................................................9
8Safety Device Operation.........................................................9
9Emptying the Dust Canister.................................................10
10User Maintenance .................................................................11
10.1Cleaning Filters...................................................................... 11
10.1.1Pre Motor Filter .........................................................................11
10.1.2Exhaust Filter............................................................................12
10.2Cleaning the Dust Canister................................................... 13
10.3Cleaning the Vacuum Cleaner and Components ............... 14
11Troubleshooting....................................................................14
12Guarantee ..............................................................................15

Page 3 of 15
1 Warnings
Before using this appliance, read and follow all warnings and instructions in this
manual, even if you are familiar with this product.
Keep appliance out of reach of young children.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Ensure children and babies do not play with plastic bags or any packaging materials.
2 Safety Direction
Please read this instruction manual carefully before first use. It is advisable to keep
this instruction manual for future reference.
DO NOT vacuum water, wet objects, liquids, ashes, hot coals, cigarette butts,
matches or any hot, smoking or burning objects, etc.
DO NOT pick up flammable or combustible materials (i.e. lighter fluid, petrol,
kerosene, etc.) or use in the presence of explosive liquids or vapour.
DO NOT pick up toxic material (i.e. chlorine bleach, ammonia, drain cleaner, etc.)
DO NOT vacuum Toner (for laser printer, copy machines etc) as there is a risk of fire
and explosion.
DO NOT vacuum plaster, cement etc. as the filter can become blocked.
DO NOT use the vacuum without all the filters fitted.
DO NOT store or use the appliance near high temperature areas.
DO NOT run over the power cord with the vacuum cleaner.
DO NOT use the vacuum cleaner if it is blocked. Turn off and clear all blockages
before continuing.
DO NOT use the vacuum cleaner with blocked filters. Clean filters before continuing.
(refer to User Maintenance section).
DO NOT use the vacuum cleaner if the appliance malfunctions, abnormal noise,
smell, smoke, is dropped or damaged in any manner or any breakage is found during
operation.

Page 4 of 15
Return appliance to the nearest authorised service agent or similarly qualified person
for a thorough examination, repair, electrical or mechanical adjustment.
DO NOT misuse the cord. Never pull the appliance by the cord or pull to disconnect it
from the outlet. Instead, grasp the plug and pull to disconnect.
DO NOT use the vacuum cleaner to pick up large objects, hard or sharp objects such
as glass, nails, screws, coins, etc. that are likely to cause damage.
DO NOT use with damaged cord or plug.
DO NOT use vacuum cleaner if it has been dropped, damaged, left outdoors, or
dropped into liquid (water etc).
DO NOT close door on cord, or pull cord around sharp edges or corners.
Cord Rewind - DO NOT allow the cord and plug to whip back at full speed. Guide the
cord and plug in gently.
DO NOT handle plug or vacuum cleaner with wet hands.
DO NOT put any objects into openings.
DO NOT use with any openings blocked and do not restrict airflow.
DO NOT operate the appliance with a damaged cord or plug.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
DO NOT use without filters in place.
DO NOT attempt to modify this product in any way.
DO empty the Dust Canister regularly for optimal operation of the vacuum.
DO keep hair, loose clothing, fingers, feet and body parts away from openings or
moving parts.
DO disconnect the appliance from the mains supply before connecting the flexible
suction hose.
DO turn off controls before you connect or disconnect the appliance to or from the
mains supply.
DO disconnect the appliance from the power supply when not in use, before changing
the dust filter, cleaning the filters or connecting / disconnecting the accessories.
DO use only on dry, indoor surfaces.

Page 5 of 15
DO use only as described in this manual. Use only manufacturer's recommended
attachments.
DO Keep cord away from heated surfaces.
DO Keep all openings free of dust, lint. hair, and anything that may reduce airflow.
DO use extra care when vacuuming on stairs.
DO keep your work area well lit.
DO store your appliance indoors in a cool. dry area.
DO ensure children and babies cannot play with plastic bags or any packaging
materials.
DO operate the appliance from a power source of the same voltage, frequency and
rating as indicated on the product identification plate
If this appliance is used by a third party, DO supply the instruction manual with it.
No liability can be accepted for any damage caused by non-compliance with these
instructions or any other improper use or mishandling of appliance.
This product has not been designed for any uses other than those specified in this
manual.
ONLY for domestic use. Industrial or commercial use invalidates the warranty.
Read and Save These Instructions
3 Transporting your Vacuum
To move your vacuum cleaner from room. to room, unplug the unit and carry
using the carry handle.
Never pull the vacuum cleaner by its cord or the flexible hose when moving.

Page 6 of 15
4 Components
1. Hose Coupling / Air inlet
2. Dust Canister Release Button
3. Dust Canister
4. Air Outlet Filter
5. Cord Rewind Button
6. Variable Suction Control
7. Carrying Handle
8. Power On / Off Button
9. Power Cord (at back)
10. Additional Carry Hand Grip Underneath
1
6
3
2
7
5
8
4
9
10

Page 7 of 15
5 Assembly Method
Please Note: Always remove the plug from the power socket before
fitting or removing accessories
5.1 Fitting Flexible Hose
Insert the coupling end of the vacuum cleaner hose into the Hose
Coupling / Air inlet hole and push in hard until it locks into place
5.2 Hose Removal
To remove flexible hose from the vacuum cleaner, press the side clips on
the coupling “inwards” and pull straight out.
5.3 Fitting Telescopic Tube and Accessories
•Insert the handle (1) into the upper end
of the telescopic tube (2).
•Insert the lower end of the telescopic
tube (4) into the Floor Head (3).
•To adjust the length of the telescopic
tube, press the telescopic tube lock
button (5) down, and then pull the handle
and tube out to the desired length.

Page 8 of 15
5.3.1 The Tools
Crevice tool
Upholstery Tool with Removable Brush
•Crevice tool is for cleaning furniture and into corners.
•Brush attachment can be used for general applications.
5.3.2 Tool Holder
The Crevice Tool and Upholstery Tool
with Removable Brush can be stored on
the vacuum hose handle as shown.
6 Power and Cord
•Before using the appliance, unwind a sufficient length of cord and insert
the plug into the power supply.
•The yellow mark on the cord shows the ideal cord
length.
•Do not extend the cord past the red mark.
•To rewind the cord, press the Cord Rewind Button
whilst controlling the cord with the other hand to
ensure that it does not whip back causing damage to
your person or surroundings.
•Insert the power plug.
•Press the On / Off button.
•You can adjust the vacuum cleaner power by rotating the Variable Speed
Control Knob on the vacuum cleaner.
•Make the suction power stronger by rotating it to
the right and make weaker by rotating it to the left
when standing at the back of the cleaner.
•Decrease power for cleaning curtains, books,
furniture, etc.
•Increase power for cleaning the bare floor.
Yellow Mark
Red Mark

Page 9 of 15
7 Floor Head
The floor head is adjustable to suit either hard floors or carpets.
Press the lever down to Retract the brush
Lift the lever up to Extend the brush
•Hard Floors – Extend Brush
Laminate flooring, tiles, vinyl etc.
•Carpet – Retract Brush
Long and short pile carpets, runners etc
8 Safety Device Operation
NOTE: The vacuum has an overheating protection device.
It will automatically switch off power to the motor if it overheats. eg. from
blocked nozzles, full dust container or unclean filters.
If this happens, turn off the vacuum and unplug from power socket, clean
blockage and / or filters and allow to rest for at least 60 minutes which should
be enough time for the motor to cool down.
Note: If the over-temperature device activates and turns the motor off, and
you do not unplug the appliance from the power point, the motor will restart
automatically after it has cooled down enough to reset the safety device.

Page 10 of 15
9 Emptying the Dust Canister
Empty the Dust Canister as frequently as possible or when the suction power
is reduced.
To remove the Dust Canister, press the release button backward and pull the
Dust Canister up and out of the housing.
Empty the canister by holding the Dust Canister in position over a rubbish
bin, press the side latch to open the base and release the dust.
The inside of the Dust Canister can be wiped clean or washed in warm soapy
water and dried thoroughly. (Refer Maintenance Section).
Close the base by swinging closed and ensuring the latch has snapped shut.

Page 11 of 15
10 User Maintenance
WARNING: The plug must be removed from the power socket before any
maintenance or replacement.
NOTE: To maximise the performance of your vacuum cleaner, you should
clean your filters regularly.
If the filters are broken or worn, replace them before continuing to use the
vacuum.
Filters can be purchased from the distributor on 1800 079 124.
10.1 Cleaning Filters
10.1.1 Pre Motor Filter2
The small round pre-motor filter is located under the dust canister in the
housing.
It is recommended to clean this filter every 3 months or sooner if required.
To remove, grasp with your fingers and pull straight up and out.
There is another 2 pre-motor filters located on the base of the dust
container.
Small Round Pre Motor Filter
White Fabric & Black Foam
Pre-motor Filter

Page 12 of 15
Twist the cover off the dust container base to expose the filters. One is a
white fabric filter the other is a black foam filter.
Wash all the Pre Motor Filters in warm mild soapy water, rinse in clean
fresh cold water and lay out flat to dry.
DO NOT scrub the filter or place in a dishwasher.
DO NOT use a hair drier to dry the filter.
NOTE: Never use the vacuum cleaner with a wet or damp filter.
Replace the small round pre motor filters by matching the 4 slots in the
filter with the lugs on the Vacuum cleaner housing and pushing down
firmly ensuring the filter sits flat.
Insert the two larger filters inside the dust container base and twist the
cover back in place.
10.1.2 Exhaust Filter
The exhaust filter is located inside the top grille.
It is recommended to clean or replace this filter every 3 months or
sooner if required.
To remove the grille, bend the catch back then pull the grille out.
Wash the Exhaust Filter in warm mild soapy water, rinse in clean fresh
cold water and lay out flat to dry.
Top Grille

Page 13 of 15
DO NOT scrub the filter or place in a dishwasher.
DO NOT use a hair drier to dry the filter.
DO NOT use the Vacuum Cleaner without the filter in place.
NOTE: Never use the vacuum cleaner with a wet or damp filter.
Refit the grille to the vacuum cleaner ensuring it is located and latched
correctly.
10.2 Cleaning the Dust Canister
The inside of the dust canister can be cleaned as follows:
Remove the Dust Canister from the Vacuum Cleaner as previously
described.
Grasp the body of the dust canister and rotate the lid anti-clockwise then
pull apart.
Wash the components in warm mild soapy water, rinse in clean fresh
cold water and let fully dry.
DO NOT place in a dishwasher.
DO NOT use a hair drier or external heat source to dry.
DO NOT use the Vacuum Cleaner without the dust canister in place.
NOTE: Never use the vacuum cleaner with a wet or damp components.

Page 14 of 15
When completely dry, refit the lid to the dust canister ensuring it is
located and locked back in position.
10.3 Cleaning the Vacuum Cleaner and Components
Do not clean the vacuum cleaner, components or accessories using
petrol or any other flammable liquid or solvents, etc.
Clean only the outside of the vacuum cleaner.
Use only a moist cloth and mild detergent for cleaning the vacuum
cleaner, components and accessories.
After cleaning, wipe off the moisture on vacuum cleaner, components
and accessories with a dry cloth.
Do Not place accessories and components in a dishwasher.
11 Troubleshooting
Noisy operation Clean the Filters and empty the Dust Canister
Suction Not Strong
Clean the Filters and empty the Dust Canister.
Check for blockages and unblock
The Suction Relief Slide on the hose handle may be
Open. If so, Slide it closed.
Over-heating / Stopping Clean the Filters, empty the Dust Canister, check for
blockages and unblock then allow unit to cool for
approximately 60 minutes
Due to the strong suction of your vacuum cleaner, it
may be difficult to push, especially over thick carpet.
Rather than force the Floor Brush, lift the Floor Brush
momentarily to allow air to flow into the vacuum
releasing the built up suction pressure, then continue
vacuuming.
Slide open the vacuum suction adjusting plate
(Sliding Block) located on the hose handle grip. This
will reduce suction to the floor head.
Floor Brush hard to push
If on carpet, the brush in the floor head may be
extended. If so, retract the brush.

Page 15 of 15
12 Guarantee
WHAT’S COVERED
H.E. Group Pty Ltd guarantees this product for a full replacement or refund for a
period of twelve months from the date of purchase. This guarantee is valid with the
presentation of the original proof of purchase receipt from the store from which you
purchased the product in order to establish the purchase price and provide the
correct value of the product paid for by you. This guarantee covers materials and
workmanship defects only.
WHAT IS NOT COVERED
This product is for household use only and if used in any way other than as detailed
in the instruction manual will void this guarantee. This guarantee does not apply to
defects arising from abuse, alteration, or unreasonable use of the product, nor does
it cover general deterioration due to usage.
This guarantee does not apply to the accessories due to general deterioration.
WHAT H.E. GROUP WILL DO
H.E. Group Pty Ltd will replace the product or provide a refund to the value of the
purchase price, if a defect is discovered in the product during the guaranteed period
of twelve months subject to verification of defect or malfunction and the date and
proof of purchase and purchase price.
Except as provided for in this guarantee, all express and implied warranties,
guarantees and conditions under statute or general law as to the merchantability,
description, quality, suitability or fitness of the goods for any purpose, or as to
design, assembly, installation, materials or workmanship or otherwise are expressly
excluded.
Nothing in this guarantee shall however be read or applied so as to exclude, restrict
or modify or have the effect of excluding, restricting or modifying any condition,
warranty, guarantee, right or remedy implied by law (including the Trade Practices
Act 1974) and which by law cannot be excluded, restricted or modified.
CUSTOMER CARE
All enquiries may be directed to our friendly customer service team on freecall
1800 079 124 or via email inf[email protected].
Read and Save These Instructions