Pittsburgh 63757 Original instruction manual

Manual Revised 11b
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. 18h
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2017 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
To ol s r eq ui r ed f o r as s em bl y a nd se rvice m a y not be i nc luded.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]

Page 2 For technical questions, please call 1-888-866-5797. Item 63757
Specifications
Glue Gun 120VAC, 40W
Crossbar Adjustment 3″ to 5″
Important Safety Information
1. Wear ANSI-approved safety
goggles and heavy-duty
work gloves during use.
2. This product is not a toy.
Do not allow children to play
with or near this tool.
3. Use as intended only.
4. Inspect before every use; do not
use if parts are loose or damaged.
5. Maintain product labels and
nameplates. These carry
important safety information.
If unreadable or missing,
contact Harbor Freight Tools
for a replacement.
6. Keep glue gun dry,
do not use in rain.
7. People with pacemakers should
consult their physician(s) before
use. Electromagnetic fields
in close proximity to heart
pacemaker could cause pacemaker
interference or pacemaker failure.
Instructions
1. Insert Glue Stick (2) into
Glue Gun (1). Plug in Glue Gun
and allow to warm up for ten to
fifteen minutes before use.
2. Using clean cloth (not included),
clean dent area with Release
Agent (3). Then apply heated
glue from Glue Gun to end of
desired Pull Tab (4, 10).
3. Place Pull Tab on center of dent
and hold there for ten seconds.
WARNING! Do NOT push Pull
Tab against dent.
4. Place Cross Bar (5) over Pull Tab,
setting Adjusters (9) to desired
length. Thread Wing Nut (6)
onto end of Pull Tab. Continue
to twist Knob until dent is
raised. Stop when dent returns
to normal surface level.
5. Unthread Knob and remove Cross
Bar and Pull Tab from surface.
Apply two drops of Release Agent
to spot of dried glue. Use Scraper
to peel off softened glue patch.
6. If a high spot has been created,
use a hammer (not included)
and lightly tap Dowel (8)
against raised spot until desired
smoothness is reached.
Note: The Repair Kit will not repair
ALL kinds of dents, regardless of size.
The Repair Kit will also not work
on aluminum panels or surfaces.

Page 3For technical questions, please call 1-888-866-5797.Item 63757
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER
OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE
BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR
THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE
MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS,
AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Parts List and Assembly Diagram
Part Description Qty.
1 Glue Gun 1
2 Glue Stick 3
3 Release Agent 1
4 Oval Pull Tab 1
5 Cross Bar 1
Part Description Qty.
6 Knob 1
7 Scraper 1
8 Dowel 1
9 Adjuster 2
10 Round Pull Tab 1
1 7
10
4
3
9
5 6 8
2
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement parts.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet
high quality and durability standards, and warrants to the original purchaser that
this product is free from defects in materials and workmanship for the period
of 90 days from the date of purchase. This warranty does not apply to damage
due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or
alterations outside our facilities, criminal activity, improper installation, normal
wear and tear, or to lack of maintenance. We shall in no event be liable for
death, injuries to persons or property, or for incidental, contingent, special or
consequential damages arising from the use of our product. Some states do
not allow the exclusion or limitation of incidental or consequential damages, so
the above limitation of exclusion may not apply to you. THIS WARRANTY IS
EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us
with transportation charges prepaid. Proof of purchase date and an explanation
of the complaint must accompany the merchandise. If our inspection verifies
the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you
with a replacement. We will return repaired products at our expense, but if we
determine there is no defect, or that the defect resulted from causes not within
the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may
also have other rights which vary from state to state.