Pixio PX222 User manual

The color and the appearance may differ depending on the product, and the specifications are subject to change without prior
notice to improve the performance. The contents of this manual are subject to change without notice to improve quality.
Copyright © 2021 Pixio USA Inc. I Pixio is a registered trademark of Pixio USA Inc. I All Rights Reserved.
Use or reproduction of this manual in parts or entirety without the authorization of Pixio USA Inc is prohibited.
All other trademarks are owned by their respective owners.
PX222

21.5in VA FHD 75Hz Gaming Monitor
PX222
BCTC2108847443E

JOIN THE
RED TEAM
RED TEAM
Keep up to date
on the latest
news, take part in
giveaways, and
interact with us!
Discord
Sign up for our
newsletter
www.pixiogaming.com
https://discord.com/invite/AK5nPezcAj
Reddit
https://www.reddit.com/r/Pixio_Gaming

RISK OF ELECTRIC SHOCK DO NOT OPEN THE MONITOR.
OPENING MONITOR BACK COVER WILL VOID YOUR WARRANTY.
This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any internal part of
this product.
This symbol alerts you that important literature concerning operation
and maintenance has been included with this product.

Before Using the Product.
Do not place the monitor near heat sources, such as radiators, and do not expose the monitor to direct sunlight
for an extended period of time.
Make sure to keep the original packaging material. If there are any needs to transport the monitor, the packaging
material will be the best method for successful delivery.
Make sure to use a soft, non-abrasive cloth when cleaning the monitor. Do not use corrosive or strong detergents
to clean the monitor. They may result in permanent damage to the panel and will void the warranty.
Always check to make sure the power cord is unplugged before cleaning the monitor.
Be careful when handling liquids while cleaning as it may cause irreparable damage to the electrical components
in the monitor.
Installation Space
Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product.
Make sure to allow some space. Do not install near heater or any other high temperature product or humidifier.

Make sure the monitor is not placed near any source of water, such as the bathroom, kitchen, or humid areas.
Do not place the monitor on an unstable, or uneven surface. If dropped, the monitor may cause bodily injuries.
When transporting the monitor, make sure it is secured in an upright position or preferably in its original packaging
for best results. When mounting the monitor, make sure to follow the instructions of the respective mounting provider
for best results.
The openings in the monitor are for ventilation. For best results, make sure the ventilation holes are not covered up.
Avoid confined spaces like a bookcase for proper functionality.
If the monitor will not be used for an extended period of time, make sure to unplug the power cord to prevent the risk
of damage from lighting strikes or other abnormal voltage incidents.
Do not overburden any socket to prevent risk of fire or shock.
Do not stick any foreign objects into the monitor to prevent risk of fire or shock.
Please do not try to take off the back panel to repair the monitor yourself. You may run the risk of shock and void the
warranty as well. Contract Pixio directly for all RMA issues.
Take note of elevation and temperature zone warnings on the adapters.
The icon indicates that the adapter is suited for areas under 2000 meters.
The icon indicates that the adapter is suited for non-tropical areas.

Take the following steps when cleaning.
1 Power off the product and computer.
2 Disconnect the power cord from the product.
Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock
may result.
3 Wipe the monitor with a clean, soft and dry cloth.
Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.
Do not spray water or detergent directly on the product.
4 Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.
5 Connect the power cord to the product when cleaning is finished.
6 Power on the product and computer.
Cleaning the Product.

Notice.

Product Includes:
Preparation.
Stand Stem M4*12mm Screw HDMI Cable

Product Assembly:
1Open the package, assemble the stand base to the stand stem with 1 piece of M4*12mm.
Screw as shown in the illustration.
M4*12mm

Product Assembly:
Take out the product with foam still attached, and
gently place it on a desktop or table. And insert the
stand stem into the back of the monitor as shown
in the illustration.
Stand assembly complete.

Net Weight: 1.95kg (4.30lb)
Dimension & Weight.
351.80mm
281.13mm
491.63mm
323.88mm 136mm
6.8mm
75mm
75mm

Monitor Inputs.
*WARNING:
Always use the appropriate power cord.
HDMI HDMI 1.4, 75Hz, FreeSync
Earphones
VGA 75Hz
DC
1 2 3 4

Control Panel.
Open the Main OSD Menu
Preset selection Short Key
Crosshair(LoS) selection Short Key
Select Input
Turn Off Power / Power On
Short Key Guide
Activate the Preset Feature. Further press to cycle through the preset.
Activate the Signal Input Selection menu. Use and to navigate and M to select the source.

Main OSD Navigation
75
Brightness
Brightness 90
50
Standard
Off
Contrast
Black Equalizer
Preset
DCR
V1.0
M E
50
OSD
Exit the Main OSD Menu.
Go Up on the Main OSD Menu / Decrease the value of a selected item.
Go Down on the Main OSD Menu / Increase the value of a selected item.
Open OSD Menu /
Enter to next level of the menu / Select highlighted item.
How to Reconfigure

Display
OSD Menu.
•Brightness: Adjust the display brightness value from 0 to 100.
•Contrast: Adjust the display contrast value from 0 to 100.
•Black Equalizer: Adjust the Black Equalizer value from 0 to 100.
•Preset: Select Preset from Standard, Internet, Game, and Movie.
•DCR: Turn DCR On or Off.
Display
Brightness 80
50
Off
Off
Contrast
Black Equalizer
Preset
DCR
V1.0
M E
50
OSD

Image Setup
•H. Position: Adjust 0-100
•V. Position: Adjust 0-100
•Clock: Adjust 0-100
•Phase: Adjust 0-100
•Aspect Ratio: Select from 4:3, and Wide
Image Setup
H. Position
50
50
Wide
V. Position
Clock
Phase
Aspect Ratio
V1.0
M E
50
50
OSD

Color Setup
•Color Temperature: Select from User, Warm, Normal, and Cool.
•Red: Adjust 0-100
•Green: Adjust 0-100
•Blue: Adjust 0-100
•Low Blue Light: Select from Off, Low, Middle, and High.
Color Setup
Color Temp.
50
50
Off
Red
Green
Blue
Low Blue Light
V1.0
M E
50
User
OSD

OSD Setup
•Language: Change the OSD menu display language
•OSD Setup: Select OSD Setup from H Position, V Position,
OSD Timer, Transparency.
H Position: Adjust 0-100
V Position: Adjust 0-100
OSD Timer: Adjust 15-60
Transparency: Adjust 0-100
OSD Setup
Language
5
15
0
OSD H. Position
OSD V. Position
OSD Timer
Transparency
V1.0
M E
99
English
OSD

Reset
•Auto Configuration: Select for Auto Configuration.
•Auto Color: Select for Auto Color.
•Reset: Select Reset to restore factory default setting.
Reset
Auto Config.
Auto Color
Reset
V1.0
M E
OSD