Pixio PXC243 User manual

The color and the appearance may differ depending on the product, and the specifications are subject to change without prior
notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
Copyright © 2019 Pixio USA Inc. I Pixio is a registered trademark of Pixio USA Inc. I All Rights Reserved.
Use or reproduction of this manual in parts or entirety without the authorization of Pixio USA Inc is prohibited.
All other trademarks are owned by their respective owners. Rev.1.01Copyright © 2019 Pixio USA Inc. I Pixio is a registered trademark of Pixio USA Inc.
All Rights Reserved.
PXC243

PXC243
23.6in 144Hz Gaming Monitor
190617019EMC-1

RISK OF ELECTRIC SHOCK DO NOT OPEN THE MONITOR.
OPENING MONITOR BACK COVER WILL VOID YOUR WARRANTY.
This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any internal part of
this product.
This symbol alerts you that important literature concerning operation
and maintenance has been included with this product.

Before Using the Product.
Do not place the monitor near heat sources, such as radiators, and do not expose the monitor to direct sunlight
for an extended period of time.
Make sure to keep the original packaging material. If there are any needs to transport the monitor, the packaging
material will be the best method for successful delivery.
Make sure to use a soft, non-abrasive cloth when cleaning the monitor. Do not use corrosive or strong detergents
to clean the monitor. They may result in permanent damage to the panel and will void the warranty.
Always check to make sure the power cord is unplugged before cleaning the monitor.
Be careful when handling liquids while cleaning as it may cause irreparable damage to the electrical components
in the monitor.
Installation Space
Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product.
Make sure to allow some space. Do not install near heater or any other high temperature product or humidifier.

Make sure the monitor is not placed near any source of water, such as the bathroom, kitchen, or humid areas.
Do not place the monitor on an unstable, or uneven surface. If dropped, the monitor may cause bodily injuries.
When transporting the monitor, make sure it is secured in an upright position or preferably in its original packaging
for best results. When mounting the monitor, make sure to follow the instructions of the respective mounting provider
for best results.
The openings in the monitor are for ventilation. For best results, make sure the ventilation holes are not covered up.
Avoid confined spaces like a bookcase for proper functionality.
If the monitor will not be used for an extended period of time, make sure to unplug the power cord to prevent the risk
of damage from lighting strikes or other abnormal voltage incidents.
Do not overburden any socket to prevent risk of fire or shock.
Do not stick any foreign objects into the monitor to prevent risk of fire or shock.
Please do not try to take off the back panel to repair the monitor yourself. You may run the risk of shock and void the
warranty as well. Contract Pixio directly for all RMA issues.
Take note of elevation and temperature zone warnings on the adapters.
The icon indicates that the adapter is suited for areas under 2000 meters.
The icon indicates that the adapter is suited for non-tropical areas.

Take the following steps when cleaning.
1 Power off the product and computer.
2 Disconnect the power cord from the product.
Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock
may result.
3 Wipe the monitor with a clean, soft and dry cloth.
Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.
Do not spray water or detergent directly on the product.
4 Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.
5 Connect the power cord to the product when cleaning is finished.
6 Power on the product and computer.
Cleaning the Product.

Notice.

Product Includes:
Preperation.
Monitor DisplayPort CableStand BaseStand Stem Power Adapter

1. Open the package, take out the product with foam still
attached, and gently place it on a desktop or table.
3. Insert the completed stand into the back of the monitor
as shown in the illustration.
4. Stand assembly completed.
2. If you connect the stand stem to the base and hear a "click"
sound, it means the installation is complete.
Product Assembly:
Foam
Monitor
Stand Stem
Stand Base

Product Disassembly:
3. Lift up the black small bar underneath the stand stem slightly, and then pull out the stand stem.

Dimension & Weight.
3.56Kg = 7.85lb
with stand
536.66mm
319.14mm
407mm
10.43mm

Monitor Inputs.
NOTICE: Use a DisplayPort 1.2 cable for 144Hz and FreeSync.
HDMI port supports up to 120Hz.
DP DisplayPort 1.2, 144Hz, FreeSync On/Off
HDMI 120Hz, FreeSync On
AUDIO OUT
DC
DVI 60Hz

Menu Short Cut
Crosshair selection Short Key Menu
Volume Adjustment Short Key Menu
Select input mode from DVI, HDMI, and DisplayPort.
Jog Button
Multi directional
button that helps
navigate.
UP
DOWN
RIGHTLEFT
Up
Left
0 50
Volume 100
Right
Control Panel.
Select mode from Standard, Movie, FPS, RTS,
and Eye Saver.
Down
Standard
DP
HDMI
DVI

Main OSD Navigation
How to Reconfigure
UP
DOWN
RIGHTLEFT
1
1
2
2
5
5
3
3
4
4
MENU Key: Press this key to pop up the main menu/back to the previous
menu (in case of main menu, exit).
When the menu is opened, the progress bar value decreases.
When the menu is opened, the progress bar value increases.
Power switch: Short press is turn on/confirm/long press is turn off.
When the menu is activated, press this button to activate the selected
function.

OSD Menu.
BRIGHTNESS
•Brightness: Adjust the display brightness value from 0 to 100.
CONTRAST
•Contrast: Adjust the display contrast value from 0 to 100.
0 50 100 0 50 100

DCR
•DCR: ON: Activate dynamic contrast.
OFF: Inactivate dynamic contrast.
MODE
•Mode: Select Mode from Standard, Movie, FPS, RTS, and
Eye Saver.
ReturnRTSFPSStandard Movie Eye Saver
Return
On Off

COLOR TEMP.
•Color Temp.: Select color temperature from cool, warm and
User.
ASPECT
•Aspect: Select Aspect from Auto, 16:9, and 4:3.
ReturnCool Warm User ReturnAuto 16:9 4:3

INPUT
•Input: Select input mode from DVI, HDMI, and DisplayPort.
ADJUST
•Auto Adjust: Automatically adjust the horizontal/vertical location,
focusing and clock of pictures.
•Auto Color: Adjust the white balance of pictures.
*Auto Adjust/Auto Color only activate in DVI.
•Gamma1: Adjust color tone brightness grey 1.
•Gamma2: Adjust color tone brightness grey 2.
ReturnHDMIDVI DisplayPort Auto adjust Auto color Gamma Return

OTHER
•Language: Change the OSD menu display language.
•Power Off: ON: Automatically turn off after saving power for 1min.
OFF: Inactivate the function of timed switch-off.
•Reset: Select from YES or NO.
•OD(Over Driver): Turn OD ON or OFF
ON: Reduce Motion Blur
OFF: Normal Mode
•Volume: Adjust the volume value from 0 to 100.
•FreeSync: Turn FreeSync ON or OFF.
ReturnLanguage Power Off Reset FreeSyncVolumeOD