Pixio PX257 Prime User manual

The color and the appearance may differ depending on the product, and the specifications are subject to change without prior
notice to improve the performance. The contents of this manual are subject to change without notice to improve quality.
Copyright © 2021 Pixio USA Inc. I Pixio is a registered trademark of Pixio USA Inc. I All Rights Reserved.
Use or reproduction of this manual in parts or entirety without the authorization of Pixio USA Inc is prohibited.
All other trademarks are owned by their respective owners.
PX257 Prime

25in IPS FHD 144Hz Gaming Monitor
PX257P
BCTC2108402493E
Pixio

Monitor
Product Includes:
Stand Stem Stand Base HDMI Cable Power Adapter

Stand assembly completed.
Insert the completed stand into the back of the monitor
as shown in the illustration.
Open the package, take out the product with foam still
attached, and gently place it on a desktop or table.
If you connect the stand stem to the base and hear
a “click” sound, it means the installation is complete
Product Assembly:

Product Disassembly:
Lift up the small bar underneath the stand stem slightly,
and then pull out the stand stem from the stand base.
Place the monitor face down on a flat protected surface gently.
Gently press the push button near the stand,
and slide out the completed stand from the back of the monitor.

Net Weight: 6.25kg (13.76lb) l Gross Weight: 7.25kg (15.98lb)

DC
DP DisplayPort 1.2, 144Hz, FreeSync Premium, HDR
HDMI HDMI 1.4, 144Hz, FreeSync Premium, HDR
Earphone
HDMI HDMI 1.4, 144Hz, FreeSync Premium, HDR

Input selection Short Key
Preset selection Short Key
Crosshair(LoS) selection Short Key
Open the Main OSD Menu
Turn the monitor On or Off
Short Key Guide
Activate the Preset Feature. Further press to cycle through the preset.
Activate the Signal Input Selection menu. Use and to navigate and M to select the source.

Exit the Main OSD Menu.
Go Up on the Main OSD Menu / Decrease the value of a selected item.
Go Down on the Main OSD Menu / Increase the value of a selected item.
Open OSD Menu /
Enter to next level of the menu / Select highlighted item.
How to Reconfigure
Input
Select
Audio
Adjust
Color
Adjust
Manual Image
Adjust
Preset Setup
Menu
1920x1080@144Hz

Preset
Input
Select
Audio
Adjust
Color
Adjust
Manual Image
Adjust
Preset Setup
Menu
Preset : Select Preset from Standard, Game [ FPS1, FPS2, RTS,
Night Vision, Gamer1, Gamer2, Gamer3 ], Movie
1920x1080@144Hz

Manual Image Adjust
Input
Select
Audio
Adjust
Color
Adjust
Manual Image
Adjust
Preset Setup
Menu
• Sharpness: Adjust Sharpness value from 0 to 100.
• Low Blue Light: Adjust Low Blue Light value from 0 to 100.
• Aspect Ratio: Select the Aspect Ratio from 4:3, 5:4, 16:9, and 16:10
[Disabled when turn on the FreeSync or Changing the Preset]
• Advanced DCR: Adjust Advanced DCR value from 0 to 100.
• Overdrive: Select Overdrive from Off, Low, Middle, and High.
• AMD FreeSync Premium: Turn AMD FreeSync Premium On or Off.
• MPRT: Turn MPRT On or Off.
1920x1080@144Hz

Color Adjust
Input
Select
Audio
Adjust
Color
Adjust
Manual Image
Adjust
Preset Setup
Menu
• Contrast: Adjust the display Contrast value from 0 to 100.
• Brightness: Adjust the display brightness value from 0 to 100.
• Black Equalizer: Adjust the Black Equalizer value from 0 to 100.
• Color Temperature: Select Color Temperature from Cool, Normal, Warm,
and User.
• Color Range: Select Color Range from Auto, Full Range and Limited Range.
• HDR: Turn HDR On or Off.
1920x1080@144Hz

Audio Adjust
Input
Select
Audio
Adjust
Color
Adjust
Manual Image
Adjust
Preset Setup
Menu
• Volume: Adjust Volume value from 0 to 100.
• Mute: Turn On or Off the sound.
1920x1080@144Hz

Switch the signal input to Auto Select, DP1(1.2), HDMI1(2.0), HDMI2 (2.0),
or DP2(1.2)
Input select
Auto Select
Input
Select
Audio
Adjust
Color
Adjust
Manual Image
Adjust
Preset Setup
Menu