Pixio PX277 PRO User manual

The color and the appearance may differ depending on the product, and the specifications are subject to change without prior
notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
Copyright © 2022 Pixio USA Inc. I Pixio is a registered trademark of Pixio USA Inc. I All Rights Reserved.
Use or reproduction of this manual in parts or entirety without the authorization of Pixio USA Inc is prohibited.
All other trademarks are owned by their respective owners.
PX277 PRO

27in IPS WQHD 165Hz Gaming Monitor
PX277 Pro
210918002EMC-1

JOIN THE
RED TEAM
RED TEAM
Keep up to date
on the latest
news, take part in
giveaways, and
interact with us!
Discord
Sign up for our
newsletter
www.pixiogaming.com
https://discord.com/invite/AK5nPezcAj
Reddit
https://www.reddit.com/r/Pixio_Gaming

RISK OF ELECTRIC SHOCK DO NOT OPEN THE MONITOR.
OPENING MONITOR BACK COVER WILL VOID YOUR WARRANTY.
This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any internal part of
this product.
This symbol alerts you that important literature concerning operation
and maintenance has been included with this product.

Before Using the Product.
Do not place the monitor near heat sources, such as radiators, and do not expose the monitor to direct sunlight
for an extended period of time.
Make sure to keep the original packaging material. If there are any needs to transport the monitor, the packaging
material will be the best method for successful delivery.
Make sure to use a soft, non-abrasive cloth when cleaning the monitor. Do not use corrosive or strong detergents
to clean the monitor. They may result in permanent damage to the panel and will void the warranty.
Always check to make sure the power cord is unplugged before cleaning the monitor.
Be careful when handling liquids while cleaning as it may cause irreparable damage to the electrical components
in the monitor.
Installation Space
Ensure some space around the product for ventilation. An internal temperature rise may cause fire and damage the product.
Make sure to allow some space. Do not install near heater or any other high temperature product or humidifier.

Make sure the monitor is not placed near any source of water, such as the bathroom, kitchen, or humid areas.
Do not place the monitor on an unstable, or uneven surface. If dropped, the monitor may cause bodily injuries.
When transporting the monitor, make sure it is secured in an upright position or preferably in its original packaging
for best results. When mounting the monitor, make sure to follow the instructions of the respective mounting provider
for best results.
The openings in the monitor are for ventilation. For best results, make sure the ventilation holes are not covered up.
Avoid confined spaces like a bookcase for proper functionality.
If the monitor will not be used for an extended period of time, make sure to unplug the power cord to prevent the risk
of damage from lighting strikes or other abnormal voltage incidents.
Do not overburden any socket to prevent risk of fire or shock.
Do not stick any foreign objects into the monitor to prevent risk of fire or shock.
Please do not try to take off the back panel to repair the monitor yourself. You may run the risk of shock and void the
warranty as well. Contract Pixio directly for all RMA issues.
Take note of elevation and temperature zone warnings on the adapters.
The icon indicates that the adapter is suited for areas under 2000 meters.
The icon indicates that the adapter is suited for non-tropical areas.

Take the following steps when cleaning.
1 Power off the product and computer.
2 Disconnect the power cord from the product.
Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock
may result.
3 Wipe the monitor with a clean, soft and dry cloth.
Do not apply a cleaning agent that contains alcohol, solvent, or surfactant to the monitor.
Do not spray water or detergent directly on the product.
4 Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.
5 Connect the power cord to the product when cleaning is finished.
6 Power on the product and computer.
Cleaning the Product.

Notice.

Product Includes:
Preperation.

Product Assembly:
Open the package, assemble the
stand base to the stand stem with 3
pieces of M4*16mm screws. Screw as
shown in the illustration.
Take out the product with foam still
attached, and gently place it on a
desktop or table. And insert the stand
stem into the back of the monitor as
shown in the illustration.
Stand assembly completed.

Net Weight: 5.71kg (12.6lb)
Dimension & Weight.
364.3mm
364.3mm
616mm
483.9mm 251.8mm
56.7mm
100mm
100mm

20˚20˚
Swivel Tilt
20º5º

90˚
90mm
Elevate Pivot

Monitor Inputs.
DC
HDMI HDMI 2.0, 144Hz, FreeSync Premium, HDR
USB Firmware Update
DP DisplayPort 1.2, 165Hz, FreeSync Premium, HDR
Type C 165Hz, 65W Power Charge, FreeSync Premium
AUDIO OUT
LAN
USB1
USB2
USB-B
*WARNING:
Always use the
appropriate power cord.
6

Control Panel.
UP
DOWN
RIGHTLEFT
Jog Button
Multi directional
button that helps
navigate.
Menu Short Cut
Up Input selection Short Key / Exit Short Key Menu
KVM Input Short Key Menu
Game Assist selection Short Key Menu
Preset selection Short Key Menu
Down
Left
Right
MOVE BACK ENTER
Input
Type C
Auto Select
DP (1.2)
HDMI [2.0]
Up
MOVE BACK ENTER
Game Plus
Timer
Crosshair(LoS)
FPS Counter
Left
MOVE BACK ENTER
Preset
Standard
User
Movie
Photo
RTS
FPS1
FPS2
Right
KVM
Down
Off
USB UP
Type C
MOVE BACK ENTER

Main OSD Navigation
How to Reconfigure
To turn ON/OFF the OSD Menu, Press Jog Button.
Up
Down
Left
Right
Enter
Press
Move up the OSD Menu / Increase
Move down the OSD Menu / decrease
Move left on the OSD Menu / Back
Move right on the OSD Menu / Enter
Press button to select
Turn ON / OFF the OSD Menu
BACK
MOVE
DP(1.2)
2560x1440 165Hz FreeSync
Brightness 90
50
50
User
Full
50
Contrast
Black Equalizer
Preset
Aspect Ratio
Sharpness
MOVE BACK ENTER
Color
Gaming Setup
Input
System Setup
User Data
V1.0
Display

Display
OSD Menu.
•Brightness: Adjust the display brightness value from 0 to 100.
•Contrast: Adjust the display contrast value from 0 to 100.
•Black Equalizer: Adjust the Black Equalizer value from 0 to 100.
•Preset: Select Preset from Standard, User, Movie, Photo, RTS,
FPS1, and FPS2.
•Aspect Ratio: Select Aspect Ratio from Full, 16:9, and 4:3.
[disabled when turn on the FreeSync]
•Sharpness: Adjust the Sharpness value from 0 to 100.
DP(1.2)
2560x1440 165Hz FreeSync
Brightness 95
50
50
User
Full
50
Contrast
Black Equalizer
Preset
Aspect Ratio
Sharpness
MOVE BACK ENTER
Color
Gaming Setup
Input
System Setup
User Data
V1.0
Display

Color
•Color Temperature: Select Color Temperature from Warm,
Normal, Cool, sRGB, and User.
•Gamma: Select Gamma from Off, 1.8, 2.0, 2.2, and 2.4.
•Hue: Adjust the Hue value from 0 to 100.
•Saturation: Adjust the Saturation value from 0 to 100.
•Low Blue Light: Adjust the Blue Light Filter value from 0 to 100.
DP(1.2)
2560x1440 165Hz FreeSync
Color Temperature
2.2
User
50
50
0
Gamma
Hue
Saturation
Low Blue Light
MOVE BACK ENTER
Color
Gaming Setup
Input
System Setup
User Data
V1.0
Display

Gaming Setup
•FreeSync Premium: Turn FreeSync On or Off.
•Overdrive: Select Overdrive from Off, Low, Middle, and High.
•Game Plus: Select Game Plus from Time, Crosshair(LoS),
and FPS Counter.
•HDR: Turn HDR On or Off.
•DCR: Turn DCR On or Off.
•MPRT: Turn MPRT On or Off.
•RGB Light: Turn RGB Light On or Off.
Timer: Select Timer from Off, 15:00, 30:00, 45:00, 60:00
and 90:00
Crosshair(LoS): Select Crosshair type.
FPS Counter: Turn FPS Counter On or Off.
DP(1.2)
2560x1440 165Hz FreeSync
FreeSync Premium Off
Off
Off
Off
Off
Off
Off
Overdrive
Game Plus
HDR
DCR
MPRT
RGB Light
MOVE BACK ENTER
Color
Gaming Setup
Input
System Setup
User Data
V1.0
Display

Input
•Switch the signal input to Auto Select, Type C, DP [1.2],
or HDMI [2.0].
DP(1.2)
2560x1440 165Hz FreeSync
Auto Select
Type C
DP (1.2)
HDMI (2.0)
MOVE BACK ENTER
Color
Gaming Setup
Input
System Setup
User Data
V1.0
Display