Pixio PX259 Advanced White User manual

The color and the appearance may differ depending on the product, and the specifications are subject to change without prior
notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
Copyright © 2020 Pixio USA Inc. I Pixio is a registered trademark of Pixio USA Inc. I All Rights Reserved.
Use or reproduction of this manual in parts or entirety without the authorization of Pixio USA Inc is prohibited.
All other trademarks are owned by their respective owners. Rev.1.01Copyright © 2020 Pixio USA Inc. I Pixio is a registered trademark of Pixio USA Inc.
All Rights Reserved.
$GYDQFHG:KLWH

Pixio
2in 7" FHD 20Hz Gaming Monitor
PX259"EWBODFE8IJUF
LCS201102111AE
WTX23X06138363E

Product Includes:
Monitor Stand Stem Stand Base HDMI Cable Power AdapterM4*12mm Screw

Stand assembly completed.
Insert the completed stand into the back of the monitor
as shown in the illustration.
Open the package, take out the product with foam still
attached, and gently place it on a desktop or table.
If you connect the stand stem to the base and hear
a “click” sound, it means the installation is complete
Product Assembly:

Product Disassembly:
Lift up the small bar underneath the stand stem slightly,
and then pull out the stand stem from the stand base.
Place the monitor face down on a flat protected surface gently.
Gently press the push button near the stand,
and slide out the completed stand from the back of the monitor.

Net Weight: kg (lb) l Gross Weight: kg (lb)

DC
DP2 DisplayPort 1., 20Hz, FreeSync Premium, HDR
HDMI2 HDMI 2.0, 240Hz, FreeSync Premium, HDR
HDMI1 HDMI 2.0, 240Hz, FreeSync Premium, HDR
DP1 DisplayPort 1., 20Hz, FreeSync Premium, HDR
Earphone

Input selection Short Key
Preset selection Short Key
Crosshair(LoS) selection Short Key
Open the Main OSD Menu
Turn the monitor On or Off
Short Key Guide
Activate the Preset Feature. Further press to cycle through the preset.
Activate the Signal Input Selection menu. Use and to navigate and M to select the source.

DP1 Resolution: 1920x1080@260Hz
Auto Select
DP1 (1.4)
DP2 (1.4)
Audio Adjust
Color Setup
Display
Misc.
OSD Setup
Gaming Setup
Input
Version: V1.0
Exit the Main OSD Menu.
Go Up on the Main OSD Menu / Decrease the value of a selected item.
Go Down on the Main OSD Menu / Increase the value of a selected item.
Open OSD Menu /
Enter to next level of the menu / Select highlighted item.
How to Reconfigure
Input
Select
Audio
Adjust
Color
Adjust
Manual Image
Adjust
Preset Setup
Menu
HDMI1 (2.0)
HDMI2 (2.0)

Preset
Input
Select
Audio
Adjust
Color
Adjust
Manual Image
Adjust
Preset Setup
Menu
Preset : Select Preset from Standard, Game [ FPS1, FPS2, RTS,
Night Vision, Gamer1, Gamer2, Gamer3 ], Movie
DP1 Resolution: 1920x1080@260Hz
Audio Adjust
Color Setup
Display
Misc.
OSD Setup
Gaming Setup
Input
Version: V1.0
Input
Switch the signal input to Auto Select, DP1 (1.4), DP2 (1.4),
HDMI1 (2.0), or HDMI2 (2.0).
Auto Select
DP1 (1.4)
DP2 (1.4)
HDMI1 (2.0)
HDMI2 (2.0)

DP1 Resolution: 1920x1080@260Hz
Brightness
Contrast
DCR
Audio Adjust
Color Setup
Display
Misc.
OSD Setup
Gaming Setup
Input
Version: V1.0
Display
• Brightness: Adjust the display brightness value from 0 to 100.
• Contrast: Adjust the display contrast value from 0 to 100.
• DCR: Turn DCR On or Off.
• Aspect Ratio: Select Aspect Ratio from Full, 4:3, 1:1, and Auto.
[disabled when turn on the FreeSync]
• Sharpness: Adjust the Sharpness value from 0 to 100.
• Black Equalizer: Adjust the Black Equalizer value from 0 to 100.
Aspect Ratio
Sharpness
Black Equalizer

DP1 Resolution: 1920x1080@260Hz
Gamma
Preset
Color Temp.
Audio Adjust
Color Setup
Display
Misc.
OSD Setup
Gaming Setup
Input
Version: V1.0
Color Setup
• Gamma: Select Gamma from Off, 1.8, 2.0, 2.2, 2.4, and 2.6.
• Preset: Select Preset from Standard, Photo, Movie, and Game.
• Color Temperature: Select Color Temperature from Normal,
Warm, Cool, and User.
• Hue: Adjust the Hue value from 0 to 100.
• Saturation: Adjust the Saturation value from 0 to 100.
• Low Blue Light: Adjust the Blue Light Filter value from 0 to 100.
Hue
Saturation
Low Blue Light

DP1 Resolution: 1920x1080@260Hz
FreeSync Premium
HDR
MPRT
Audio Adjust
Color Setup
Display
Misc.
OSD Setup
Gaming Setup
Input
Version: V1.0
Gaming Setup
• FreeSync Premium: Turn FreeSync On or Off.
• HDR: Turn HDR On or Off.
(Enabling HDR may reset refresh rate, please make sure to
adjust and set the refresh rate to your preference.)
• MPRT: Turn MPRT On or Off.
• Crosshair (LoS): Select Crosshair from Off, LoS1, LoS2, and LoS3.
• Overdrive: Select Overdrive from Off, High, Middle, and Low.
Crosshair (LoS)
Overdrive

DP1 Resolution: 1920x1080@260Hz
Mute
Volume
Audio Adjust
Color Setup
Display
Misc.
OSD Setup
Gaming Setup
Input
Version: V1.0
Audio Adjust
• Mute: Turn Mute On or Off.
• Volume: Adjust the Volume value from 0 to 100.