Pixlip GO LIGHTBOX 3996 User manual

156026 
User manual
GO LIGHTBOX
3996
www.pixlip.us
156026

2

| 3www.pixlip.us 2COMPONENTS
Corner connector
Strut holderStrut 38
Base plate
4×
2×1×
2×
2×
Power supply with device Plug
1×
Y-cable
1×
Profile 35 with LED Module
2×
COMPONENTS
Profile 44
4×
Textile and blockout
1×
Textile
2×
OPTIONAL
4×
GO connector set
1×
1×

4
www.pixlip.us3996
1
2
2 ×
35

| 54www.pixlip.us
| 5
4
www.pixlip.us
3996
3
4
2 ×
44

6
www.pixlip.us
www.pixlip.us
5
3996
38

| 76www.pixlip.us
| 7
6
www.pixlip.us
7
6
3996
2 ×
44

8
www.pixlip.us3996
www.pixlip.us
3996
8

| 98www.pixlip.us3996
| 9
8
www.pixlip.us
3996
9

10
www.pixlip.us3996
www.pixlip.us
3996
10

| 1110www.pixlip.us3996
| 11
10
www.pixlip.us
3996
11

12
www.pixlip.us3996
12
www.pixlip.us
3996
12

| 1312www.pixlip.us3996

www.pixlip.us3996
SAFETY INSTRUCTIONS
The crossed-out wheeled bin symbol
indicates that the item should be disposed
of separately from household waste. The
item should be handed in for recycling in
accordance with local environmental regu-
lations for waste disposal. By separating
a marked item from household waste, you
will help reduce the volume of waste sent
to incinerators or land-ll and minimize any
potential negative impact on human health
and the environment.
Before the installation and use of the appliance, read
carefully the supplied instructions. The manufacturer is
not responsible for any injuries or damages that are the
result of incorrect installation or usage.
Assembly and installation should only be carried out by
trained specialist personnel.
Please only use the delivered devices. Faulty wiring can
cause damage. Do not install or use a damaged appliance.
Please consider that unauthorized modications on the
device are forbidden due to safety reasons.
Disconnect your system from the power supply before
starting installation or maintenance work. Please make
sure that it cannot be switched on accidentally.
Do not expose the device to direct sunlight, moisture,
extreme heat, hot light or strong magnetic elds.
Keep proper ventilation around the unit and do not stack
any object on it.
Never operate the device without casing hood, with clo-
sed vent slots, at high temperatures, at high air moisture.
Connect the system only to an easily accessible socket
located near the installation site.
Always use a correctly installed shockproof socket. To
avoid tripping hazards, do not use extension cables and
don’t use multi-plug adapters.
Output current and output wattage must not exceed the
rated values on the specications.
Do not stare directly into the LEDs. Do not use devices
which can strongly focus light for viewing the light beam.
Do not use aggressive chemicals or abrasives for cleaning.
Always keep the instructions in a safe and accessible
location for future reference.

GO LIGHTBOX 3996
AUFBAUANLEITUNG
USER MANUAL
© 2022
PIXLIP GmbH
Otto-Hahn Straße 11
40721 Hilden
Germany
[email protected]
www.pixlip.us