Pixlip POP LIGHTBOX 85200 User manual


127004
www.pixlip.us
User manual
POP LIGHTBOX
85200

3

www.pixlip.us | 33
COMPONENTS
TOP
BOTTOM
1 × Base prole with foot plates
2 × Strut holder
1 × Power supply
1 × Print textile
1 × Rear wall textile with integrated
LED lighting
1 × Top prole
1 × Side prole
1 × Side prole
TOP
BOTTOM
4 × Corner connector
1 × Strut

www.pixlip.us 5

www.pixlip.us | 55
TOP
BOTTOM

www.pixlip.us 7
For correct installation,
the coloured stickers
must point upwards
and be visible at all
times.
BOTTOM

www.pixlip.us | 77
BOTTOM

www.pixlip.us 9
BOTTOM

www.pixlip.us | 99
BOTTOM

www.pixlip.us 11
TOP
BOTTOM

www.pixlip.us | 1111
BOTTOM
BOTTOM
TOP
REAR WALL TEXTILE WITH INTEGRATED
LED LIGHTING
The easiest way to
insert the textile is to
start with the corners.

www.pixlip.us
13

www.pixlip.us | 1313
PRINT TEXTILE

www.pixlip.us
15
BOTTOM

www.pixlip.us | 1515

www.pixlip.us
17
16

www.pixlip.us | 1717

www.pixlip.us
SAFETY INSTRUCTIONS
The crossed-out wheeled bin symbol
indicates that the item should be disposed
of separately from household waste. The
item should be handed in for recycling in
accordance with local environmental regu-
lations for waste disposal. By separating
a marked item from household waste, you
will help reduce the volume of waste sent
to incinerators or land-ll and minimize any
potential negative impact on human health
and the environment.
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible for any injuries or damages that are the
result of incorrect installation or usage. Always keep the
instructions in a safe and accessible location for future
reference.
Please only use the delivered devices. Faulty wiring can
cause damage. Do not install or use a damaged appliance.
Please consider that unauthorized modications on the
device are forbidden due to safety reasons! Disconnect
your system from the power supply before starting
installation or maintenance work. Please make sure that
it cannot be switched on again accidentally.
Do not expose the device to direct sunlight, moisture,
extreme heat, hot light or strong magnetic elds. Keep
proper ventilation around the unit. Never operate the de-
vice without casing hood, with closed vent slots, at high
temperatures, at high air moisture.
Connect the system only to an easily accessible socket
located near the installation site. Always use a correctly
installed shockproof socket. To avoid tripping hazards,
do not use extension cables and don’t use multi-plug
adapters.
Output current and output wattage must not exceed the
rated values on the specications.
Do not stare directly into the LEDs. Do not use devices
which can strongly focus light for viewing the light beam.
Do not use aggressive chemicals or abrasives for cleaning.

POP LIGHTBOX 85200
USER MANUAL
VIDEO TUTORIAL
© 2022
PIXLIP GmbH
Otto-Hahn Straße 11
40721 Hilden
Germany
[email protected]
www.pixlip.us