Planar PT1545R User manual

PT1545R
Touch Screen LCD Monitor
USER’S GUIDE
www.planartouch.com

The information contained in this document is subject to change without notice.
This document contains proprietary information that is protected by copyright. All rights
are reserved. No part of this document may be reproduced,translated to another language
or stored in a retrieval system, or transmitted by any means, electronic, mechanical,
photocopying, recording, or otherwise, without prior written permission. Windows is a registered
trademark of Microsoft, Inc. Other brand or product names are trademarks of their respective
holders.
The test results show that this device meets the FCC rules. Those limits are set to protect
residential areas from the devices with harmful emission. This device will produce, use and
radiate radio frequency energy. In addition, failure to follow the user’s manual to install or use
this device might produce harmful interference with radio communication. Not withstanding
the foregoing, it does not guarantee that this type of harmful interference does not occur in
some special installations. The interference caused by this device to the reception of radio
or television signals may be verified by turning it on and off. Any changes or modifications to
this TFT LCD would void the user’s authority to operate this device.
Important Recycle Instructions:
Lamp(s) inside this product contains mercury. This product may contain other
electronic waste that can be hazardous if not disposed of properly. Recycle or
dispose in accordance with local, state, or federal Laws. For more information,
contact the Electronic Industries Alliance at WWW.EIAE.ORG. For lamp specific
disposal information check WWW.LAMPRECYCLE.ORG.

Table of Contents
Usage Notice
Precautions............................................................................................................................. 1
Introduction
About PT1545R ...................................................................................................................... 2
Touch Screen for PT1545R.......................................................................................... 2
Package Overview ...................................................................................................... 3
Installation
Product Overview ........................................................................................................ 4
Front View .............................................................................................................. 4
Bottom View .......................................................................................................... 4
Kensington Security Slot.............................................................................................. 5
VESA Mount Your Monitor ........................................................................................... 6
Start Your Installation .................................................................................................. 7
Remove the Deskstand................................................................................................ 8
Connecting the Display (Figure 11.1) ........................................................................... 8
(Figure 11.1).......................................................................................................... 9
User Controls
Side Panel Controls....................................................................................................10
How to Use the OSD Menus .......................................................................................11
On-Screen Display Menus ..........................................................................................12
Appendix
Troubleshooting..........................................................................................................13
Warning Signal ...........................................................................................................14
No Signal ....................................................................................................................14
Going to Sleep............................................................................................................14
Out of Range..............................................................................................................14
Product Dimensions ...................................................................................................15
Compatibility Modes ...................................................................................................16
Touch Screen Driver Installation .................................................................................17
Driver Installation Process ......................................................................................17
PT1545R Driver Install Instructions.........................................................................17
PT1545R Calibration Tool Install ...............................................................................17
Product Registraton and Technical Support ................................................................19

Usage Notice
! Warnin
g
- To prevent the risk o
f
fi
re or shock hazards, do not expose
this product to rain or moisture.
! Warnin
g
- Please do not open or disassemble the product as this ma
y
cause
e
l
ec
tri
c
s
h
oc
k
.
Precautions
Follow all warnings, precautions and maintenance as recommended in this user’s manual to
maximize the life of your unit.
Do:
• Turn off the product before cleaning.
• Touch screen surface may be cleaned using a soft clean cloth moistened with
mild window glass commercial cleaners or 50/50 mixture of water and isopropyl
alcohol.
• Use a soft cloth moistened with mild detergent to clean the display housing.
• Use only high quality and safety approved AC/DC adapter.
• Disconnect the power plug from AC outlet if the product is not going to be used for
an extended period of time.
Don’t:
• Do not touch the LCD Display screen surface with sharp or hard objects.
• Do not use abrasive cleaners, waxes or solvents for your cleaning.
• Do not operate the product under the following conditions:
- Extremely hot, cold or humid environment.
- Areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- In direct sunlight.
1

Introduction
About PT1545R
The PT1545R is a 15" flat panel screen with an active matrix, thin-film
transistor (TFT) liquid crystal display (LCD).
Features include:
• Direct Analog signal input
• Active matrix TFT LCD technology
• 1024 x 768 XGA resolution
• 15" viewable display area
• 31.5 ~ 60 KHz horizontal scan
• 56 ~ 75 Hz high refresh rate
• 0.297mm x 0.297mm pixel pitch
• Auto adjustment function
• Multilingual OSD user control
• Kensington security slot
• 100 mm VESA mount
• Removable base for flexible mounting solutions.
• PT1545R- 5-wire resistive touch screen with dual RS-232 Serial / USB controller.
• Build-in audio-1W x 2
Touch Screen for PT1545R
• Analog 5-wire resistive touch screen for finger and stylus input
• Surface: Anti-glare treatment
• Interface: combo RS-232 Serial/USB controller
• Transmittance: 80%(Typ.)
• Driver: Windows® 7, VISTA, XP, 2000, ME, 98, NT 4.0, CE, XP Embedded, Linux,
Apple® Mac OS
2

3
Package Overview
LCD Display Power Cord VGA Signal Cable
RS-232 Cable
USB Cable ( A to B) Audio-in Cable
Touch Screen Driver
Installation CD-ROM
Landing Strip User’s Guide
xxxxxxxxx
/
xxxxxxxxx
xxxxxxxxx
USER’S GUIDE
www.planar.com
Screw

Installation
Product Overview
• Front View
• Bottom View
4
RS-232
VGA
AC IN
USB
POWER SWITCH
Audio

Kensington Security Slot
The monitor can be secured to your desk or any other fixed object with Kensington lock
security products. The Kensington lock is not included.
5

VESA Mount Your Monitor
This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface standard
which defines a physical mounting interface for flat panel monitors, and corresponding with
the standards of flat panel monitor mounting devices, such as wall and table arms. The VESA
mounting interface is located on the back of your monitor.
To mount the monitor on an UL-listed swing arm or other mounting fixture, follow the
instructions included with the mounting fixture to be used.
! Warning!
Please select the proper screws!
The distance between the back cover surface and the bottom of the screw hole
is 11 mm. Please use four M4 screws diameter with proper length to mount your
monitor.
NOTE: the stand will support up to 11 lbs (5kg).
6
Slots (x 4)

7
Start Your Installation
Please follow these instructions so that you can hookup the cables to associated connector.
1. Lay the LCD flat on an even surface.
2. Move the stand into position as seen in the step 2 diagram.
3. Remove the cable cover as seen in the step 3 diagram.
4. Connect the cables to the appropriate connectors as seen in the step 4 diagram. Use
step 4-1 diagram if using the RS-232 serial connector. Use the step 4-2 diagram if using
the USB connector.
5. Position all cables under the cover lip as seen in the step 5 diagram.
6. Re-attach the cable cover . Remove the screw (CBM M3x6) from the accessory box, and
insert the screw into the cable cover and monitor as seen in the step 5 diagram.
K
Step 2
K
K
RS-232
VGA Audio
Power VGA Audio Power USB
Step 4-2Step 4-1
K
Step 2 Step 3
K
Step 5