Planet networking & communication Fgsw-2840 User manual

– 1 – – 2 –

– 3 – – 4 –

1. Package Contents

Thank you for purchasing PLANET 24 / 48-Port 10/100TX + 4-Port

Gigabit Managed Switch, FGSW-2840/FGSW-4840S. “Managed

Switch” mentioned in this quick installation guide refers to the

FGSW-2840/FGSW-4840S.

Model

Name

10/100TX

Copper Ports

10/100/1000T

Copper Ports

SFP Fiber Optical

Interface

FGSW-2840 24 42 (Combo port

27/28)

FGSW-4840S 48 2 2

Open the box of the Managed Switch and carefully unpack it. The

box should contain the following items:

The FGSW-2840 or FGSW-4840S x 1 (With SFP Dust Cap x 2)

Quick Installation Guide x 1

Power Cord x 1

Rubber Feet x 4

Two 19” Rack-mounting Brackets Kit x 1

If any item is found missing or damaged, please contact your local

reseller for replacement.

2. Requirements

Workstations running Windows XP/2003/Vista/7/8/2008, MAC OS

X or later, Linux, UNIX, or other platforms are compatible with

TCP/IP protocols.

Workstations are installed with Ethernet NIC (Network Interface

Card)

Ethernet Port Connection

Network cables -- Use standard network (UTP) cables with

RJ-45 connectors.

The above PC is installed with Web browser and JAVA runtime

environment plug-in.

Note

It is recommended to use Internet Explore 8.0 or

above to access the Managed Switch. If the Web

interface of the Managed Switch is not accessible,

please turn off the anti-virus software or firewall and

then try it again.

3. Starting Web Management

The following shows how to start up the Web Management of the

Managed Switch. Note the Managed Switch is congured through an

Ethernet connection. Please make sure the manager PC must be set

on the same IP subnet address.

For example, the default IP address of the Managed Switch

is 192.168.0.100; then the manager PC should be set at

192.168.0.x (where x is a number between 1 and 254, except

100) and the default subnet mask is 255.255.255.0.

PC / Workstation

with Web Browser

192.168.0.x

Managed Switch

RJ-45/UTP Cable

IP Address: 192.168.0.100

Figure 3-1: IP Management Diagram

 Logging in to the Managed Switch

1. Use Internet Explorer 8.0 or above Web browser and enter IP

address http://192.168.0.100 to access the Web interface.

2. When the following dialog box appears, please enter the default

user name and password “admin”. The login screen in Figure

3-2 appears.

Default Username: admin

Default Password: admin

Figure 3-2: Web Login Screen

3. After entering the password, the main screen appears as Figure

3-3 shows.

Note

The following web screen based on FGSW-4840S, for

FGSW-2840 the display will be the same to FGSW-

4840S.

Figure 3-3: Web Main Screen of Managed Switch

The Switch Menu on the left of the Web page lets you access all the

commands and statistics the Managed Switch provides.

Figure 3-4: Switch Menu

Now, you can use the Web management interface to continue the

Switch management. Please refer to the user’s manual for more.

– 5 – – 6 –

4. Recovering Back to Default

Conguration

IP Address has been changed or admin password

has been forgotten –

To reset the IP address to the default IP Address “192.168.0.100”

or reset the login password to default value, press the reset

button on the front panel for about 5 seconds. After the device is

rebooted, you can login the Web interface management within the

same subnet of 192.168.0.xx.

Reset

2 4

1 3

PWR

SYSReset

12345678

1 3 5 7

2 4 6 8

ACT

100 LNK

ACT

10 LNK

(FGSW-2840) (FGSW-4840S)

Figure 4-1: FGSW-2840 / FGSW-4840S Reset Button

5. Customer Support

Thank you for purchasing PLANET products. You can browse our

online FAQ resource and User’s Manual on PLANET Web site rst

to check if it could solve your issue. If you need more support

information, please contact PLANET switch support team.

PLANET online FAQ:

http://www.planet.com.tw/en/support/faq.php?type=1

Switch support team mail address:

[email protected]

FGSW-4840S User’s Manual:

http://www.planet.com.tw/en/support/download.php?type1=1&model=48573&type=3

FGSW-2840 User’s Manual:

http://www.planet.com.tw/en/support/download.php?type1=1&model=48604&type=3

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All other

trademarks belong to their respective owners.

This manual suits for next models

Table of contents

Other Planet Networking & Communication Switch manuals