Planet WPG-100 User manual

Wireless Presentation Gateway
User Manual
WPG-100
Version: 1.00
Date: August 28, 2006

Copyright
Copyright ©2006 by PLANET Technology Corp. All rights reserved. No part of this publication may
be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical,
manual or otherwise, without the prior written permission of PLANET.
PLANET makes no representations or warranties, either expressed or implied, with respect to the
contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular
purpose. Any software described in this manual is sold or licensed "as is". Should the programs prove
defective following their purchase, the buyer (and not PLANET, its distributor, or its dealer) assumes
the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting
from any defect in the software. Further, PLANET reserves the right to revise this publication and to
make changes from time to time in the contents hereof without obligation to notify any person of such
revision or changes.
All brand and product names mentioned in this manual are trademarks and/or
registered trademarks of their respective holders.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio technician for help.
FCC Caution
To assure continued compliance. (example-use only shielded interface cables when connecting to
computer or peripheral devices). Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the Following two
conditions: ( 1 ) This device may not cause harmful interference, and ( 2 ) this Device must accept any
interference received, including interference that may cause undesired operation.
Federal Communication Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to
avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna
shall not be less than 20 cm (8 inches) during normal operation.

R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/CE OF THE EUROPEAN
PARLIAMENT AND THE COUNCIL OF 9 March 1999 on radio equipment and telecommunication
terminal Equipment and the mutual recognition of their conformity (R&TTE)
The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal
Equipment and Satellite Earth Station Equipment) As of April 8,2000.
Safety
This equipment is designed with the utmost care for the safety of those who install and use it. However,
special attention must be paid to the dangers of electric shock and static electricity when working with
electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all
times to ensure the safe use of the equipment.
WEEE regulation
To avoid the potential effects on the environment and human health as a result of the
presence of hazardous substances in electrical and electronic equipment, end users of
electrical and electronic equipment should understand the meaning of the crossed-out
wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and have to
collect such WEEE separately.
Revision
User’s Manual for PLANET Wireless Presentation Gateway
Model: WPG-100
Rev: 1.0 (September. 2006)
Part No. EM-WPG100

WPG-100 User Manual
Contents of Table
1. OVERVIEW..................................................................................................................................5
2. QUICK START.............................................................................................................................8
3. CLIENT UTILITY .....................................................................................................................11
3.1 Starting Program.....................................................................................11
3.2 Login........................................................................................................12
3.3 Buttons Description.................................................................................12
3.4 Start Presentation....................................................................................13
3.5 Stop Presentation.....................................................................................13
3.6 Open Admin Web Page............................................................................13
3.7 Searching Server.....................................................................................14
3.8 System Information.................................................................................15
3.9 Exit Program...........................................................................................15
4. WEB MANAGEMENT..............................................................................................................15
4.1 Home Page ..............................................................................................15
4.2 Download Software.................................................................................16
4.3 Conference Control.................................................................................17
4.4 Login Web Admin....................................................................................19
4.5 System Status...........................................................................................20
4.6 Operating Mode.......................................................................................20
4.7 Projection Setup......................................................................................25
4.8 Change Passwords ..................................................................................26
4.9 Reset to Default.......................................................................................27
4.10 Firmware Upgrade..................................................................................28
4.11 Reboot System .........................................................................................29
4.12 Logout......................................................................................................29
WALL MOUNT INSTRUCTIONS.....................................................................................................30
SPECIFICATION.................................................................................................................................31
TROUBLESHOOTING.......................................................................................................................32
- -
4

WPG-100 User Manual
1.Overview
WPG-100 is a easy installation 、convenient operation and user friendly
projecting device. It turns your current Projector into a high-end Projector。With
the WPG-100 your Projector become a wireless device and PC/Notebooks will
be easier to project screen to Projector.
Plug & Play
WPG-100 is a plug-and-play device which is easy to install and connect with.
Any Notebooks/PCs with built-in Centrino or Wi-Fi card can easily download
driver and connect to WPG-100.
Flexibility
WPG-100 is compatible to all kinds of projectors, using wire-line or wireless
connection, to display presentations. Instantly project your screen to the
projector with just one mouse click. Nor more cable swapping hassles.
Performance
WPG-100 has the ability to deliver real time animation screens for up to
1024x768 resolutions in 24-bit color depth. It also provides friendly
web-based administrating UI for easy configuration and wireless security
setups.
Security
Support Login code to protect other users from accessing presentation
contents. During presentation, screen images can also be protected by WEP
64/128 encryption.
Conference control
Supporting multi-users to switch presentation, any member at the conference
can easily login to presentation server and switch the computer’s screen to
Projector without moving the computer to Projector.
- -
5

WPG-100 User Manual
Different operating mode to fulfill both Wireless and Ethernet
environment
One button operation
User-friendly graphic interface to allow users to use it without any training。
Intelligent searching function
After perform WPG-100 utility, the utility will automatically search all the
WPG-100 which are available and within the wireless LAN cover range。Users
don’t need to do any other setting, without worrying about the operation
procedures.
- -
6

WPG-100 User Manual
¾Features
Compatible to all projectors with standard VGA connectors.
One-Click to switch presenters’ displays.
Real time display for PowerPoint presentations, images and
applications.
Supports display resolutions up to 1024x768 with 24-bit color.
No installation CD required, software is directly downloaded from the
device.
Provide session security login and wireless WEP key to protect
presentation contents.
Conference control function is provided for the host to moderate a
meeting.
Provide friendly web-based user interface for easy configuration.
Support Static-IP and DHCP server.
¾Packet Content
WPG-100
CD Disk (User’s Guide included)
5V DC Power adapter
Quick Installation Guide
Antenna * 1
Wall mount kit
- -
7

WPG-100 User Manual
2.Quick Start
1) Connect projector VGA cable to WPG-100 box VGA connector and turn on
projector power.
2) Turn on WPG-100.
♦When Projector shows the default menu on the screen as below, it indicates the
WPG-100 is ready now.
3) Make sure your PC LAN port or WLAN interface is enabled already, and
connect your PC with WPG-100 (wireless default SSID is WPG-100).
4) Open your browser and enter the WPG-100 IP address to get in WPG-100
web home page.
- -
8

WPG-100 User Manual
♦The default IP address of WPG-100 is 192.168.1.10. If you have modified the IP address,
you can refer to the IP address shown on the left-down corner of projector screen.
5) Click on “Download”.
6) You will see a file download dialog box appear, press “Run” to execute the
installation program.
- -
9

WPG-100 User Manual
7) After install the program, WPG-100 shortcut will come out on the
desktop.
8) If there is any firewall, please make sure your personal firewall has allow
WPG-100 software to pass through.
9) Enter the LOGIN CODE and press “OK”.
♦You can see the login code on the projector screen
10) Click the “Play” button to start projection!
- -
10

WPG-100 User Manual
3.Client Utility
3.1 Starting Program
After you download WPG-100 Windows program via web page successfully,
then follow below steps to start.
1) Click WPG-100 icon to execute the program.
2) Program start to search for WPG-100 box automatically,
3) If WPG-100 box founded then “Login Code” dialog box will be pop up on
the PC screen.
4) If not, will enter to disconnected state and “Reconnect” button shown for
you to try again.
zSearching for WPG-100 box
zWPG-100 box is founded and enter login code to start.
zFailed to find WPG-100 box
- -
11

WPG-100 User Manual
3.2 Login
1) After “Login Code” dialog box shown, enter login code to start presentation.
2) You can see the login code shown on the projector screen.
3.3 Buttons Description
1) After login successfully, operating deck comes out.
2) Click following buttons to Start or Stop presentation.
Start projecting
Stop projecting
- -
12

WPG-100 User Manual
Refresh projecting screen
Server Login Code
Function menu
While projecting in progress, this icon is blinking
Minimize the program
Exit the program
3.4 Start Presentation
Click to start wireless presentation.
3.5 Stop Presentation
Click to stop wireless presentation.
3.6 Open Admin Web Page
Click to open function menu and select “Web Admin” management web
page. The web page detailed functions will be described on next chapter.
- -
13

WPG-100 User Manual
3.7 Searching Server
Click “Search Server” to search for WPG-100 box.
- -
14

WPG-100 User Manual
If there is not any WPG-100 available, the utility will show the result below:
3.8 System Information
Click “Info” to show system information. It includes product model number, IP
address and other information.
3.9 Exit Program
Click to terminate the program.
4.1 Home Page
1. Default IP address of WPG-100 is 192.168.1.10. Please set your PC’s IP
2. less interface
3. e address filed of browser as below.
4.Web Management
address to 192.168.1.x. Subnet mask to 255.255.255.0.
Make sure your PC connect to WPG-100 via wired or wire
(SSID: WPG-100) successfully.
Enter WPG-100 IP address to th
- -
15

WPG-100 User Manual
4. Than you will see the WPG-100 home screen.
4.2 Download Software
Select “Download software” function.
1. Press “Login” button to download Utility, the default password is blank
2. You can save file first then execute later or execute this utility directly.
3. Follow Installation Wizard instructions to proceed till the installation process
complete.
4. If pop up “Windows Security Alert” because Windows firewall block this
program. You just press “Unblock” button to continue installation.
5. Once installation complete, a utility shortcut come out on the screen.
- -
16

WPG-100 User Manual
4.3 Conference Control
1. This function allows you to host a meeting smoothly without projector cable
swapping and each participant can show their presentation easily.
2. Select “Conference Control” function.
3. Enter password, the default value is “trainer”, and then press [Login].
4. After login, you can see a User List on the screen which indicates all of
users connected to WPG-100 box.
5. There are three columns, “Computer Name”, “Play Control” and “IP
- -
17

WPG-100 User Manual
Address”.
6. You can press “Play Control” button to control who is next
presenter by “Play” button and “Stop” button.
7.
zComputer Name: The name of PC connected to WPG-100 box.
zPlay control：Show current user’s projecting status.
: Start projecting
: Stop projecting.
zIP address：The IP address of PC
- -
18

WPG-100 User Manual
4.4 Login Web Admin
1. Click [Admin] and then enter password to login web page.
2. The password default value is “admin”.
- -
19

WPG-100 User Manual
4.5 System Status
*** Click [System Status], shows current system status.
Model Name: Product model name
Versions:
1. Firmware version no.: Product firmware version number.
2. Software version no.: Windows client utility version number.
Network Status:
1. Operating Mode: current operating mode
2. IP address：IP address of WPG-100
3. MAC address.
4. Subnet Mask.
5. Default Gateway
Connection Status:
1. Projecting status: which is “Waiting for projecting” or “Projecting”
2. Total Users: how many users login to WPG-100 now.
4.6 Operating Mode
There are two kinds of operating mode, which one is suitable for you that
depend on your office network configurations.
- -
20