Planet ADE-3400 User manual

– 1 – – 2 –
– 3 – – 4 –
1. Important Safety Instructions
● Do not use the ADSL modem in high humidity or high
temperatures.
● DonotusethesamepowersourcefortheADSL modem
asotherequipment.
● Do not open or repair the case yourself. If the ADSL
modem is too hot, turn off the power immediately and
haveitrepairedataqualiedservicecenter.
● Avoidusingthisproductandallaccessoriesoutdoors.
● PlacetheADSLmodemonastablesurface.
● Only use the power adapter that comes with the
package.  Using a different voltage rating power adaptor
maydamagetherouter.
2. Package Content
ADE-3400 / ADE-4400
t ADE-3400/ADE-4400Unit
t CD-ROMcontainingtheuser’smanualx1
t QuickInstallationGuidex1
t ADSLSplitterx1
t PowerAdapterx1
t RJ-11(ADSL)cablex2
t RJ-45cablex1
If any of the above items are missing or damaged, contact
yourlocaldealerforsupport.
3. Hardware Installation
Pleaseconnectthedevicetoyoucomputerasfollow:
● Ifconnecting tothesplitter,connectthe “Line”splitter to
walljackusingonetelephonecable
● Useanothertelephonecabletoconnect“MODEM”portof
the splitter and “LINE” port of the modem. The “Phone”
port of the splitter can be use to connect the telephone
byatelephonecable.
● Use Ethernet cable to connect “LAN” port of the modem
and“LAN”portofyourcomputer.
Power
Phone
Jack
RJ-11
Splitter
Phone
PC
RJ-45
Power
Adpter
Modem
Phone
Line
ADE-3400
Line Ethernet Reset Power
Figure 1: ADE-3400 connection diagram
Power
Phone
Jack
RJ-11
Splitter
Phone
PC
RJ-45
Power
Adpter
Modem
Phone
Line
ADE-4400
Figure 2: ADE-4400 connection diagram
Ifdonotneedtoconnecttothesplitter,
● Connectthemodemtowalljackwithatelephonecable.
● Use Ethernet cable to connect “LAN” port of the modem
andnetworkadaptorofyourcomputer.

– 5 – – 6 –
4. Router Parameters Setting
Conguring computer network card IP address:
Congure your network card’s TCP/IP properties to Obtain
an IP address automatically from router, or set the
computer’s IP with the same network mask of the router.
(For example: Router’s default IP is 192.168.1.1 /
255.255.255.0)
Thenyoucansetcomputer’sIPto:
192.168.1.x / 255.255.255.0
(Therangeforxisfrom2to254)
Web setting interface:
Open IE or Netscape Web browser, Input
http://192.168.1.1 (Router default IP address) in the
address column, then click <ENTER> button, access the
followingsettinginterface:
Input user name and password, then click Login key to
enterWEBsettinginterface.
Default setting:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Username / Password: admin / admin
After type right username and password, the following
windowwillpopup:
Figure 3: The main setup screen
5. Further Conguration
The above steps introduce simple installations and
congurations for ADE-3400 / ADE-4400. For further
congurations of WAN, LAN, NAT, Security, Routing, DNS,
andDSLetc,pleaserefertotheuser’smanualintheCD.If
you have other questions, please contact the local dealer
ordistributorwhereyoupurchasedthisproduct.