Planet GSW-1602SF User manual

1
16/24-Port Gigabit Ethernet Switch
Quick Installation Guide
GSW-1602SF / GSW-2404SF
Version 3.0

Quick Installation Guide for GSW-1602SF / GSW-2404SF
- 2 -
Package Content
Thank you for purchasing PLANET 16/24-Port 10/100/1000Mbps Web
Smart Gigabit Ethernet Switch, GSW-1602SF / GSW-2404SF. Terms of
“Switch” in following section of this Quick installation guide means the
GSW-1602SF / GSW-2404SF.
Upon open the box of the Switch and carefully unpack it. The box should
contain the following items:
The Switch x 1
This Quick Installation Guide x 1
User’s manual CD x 1
Power Cord x 1
Rubber feet x 4
Two rack-mounting brackets with attachment screws x1
If any item is found missing or damaged, please contact your local
reseller for replacement.

Quick Installation Guide for GSW-1602SF / GSW-2404SF
- 3 -
Requirements
The GSW-1602SF / GSW-2404SF provide remote Web interface for
manage; the following equipments are necessary for further management.
Workstation
•Subscriber PC installed with Ethernet NIC (Network Card)
•The operate system of subscriber PC that running Windows
98/ME, 2000/2003/XP/Vista, MAC OS9 or later, Linux, UNIX or
other platform compatible with TCP/IP protocols.
•Above PC installed with WEB Browser
Network cables:
•Use standard network (UTP) cables with RJ45 connectors.

Quick Installation Guide for GSW-1602SF / GSW-2404SF
- 4 -
Start Web Management
The PLANET GSW-1602SF / GSW-2404SF provide a built-in browser
interface. You can manage the Switch remotely by having a remote host
with Web browser, such as Microsoft Internet Explorer, Netscape
Navigator or Mozilla Firefox.
The following shows how to startup the Web Management of the Switch,
please note the Switch is configured through an Ethernet connection,
make sure the manager PC must be set on the same IP subnet address.
For example, the default IP address of the Switch is 192.168.0.100 (the
factory-default IP address), then the manager PC should be set at
192.168.0.x (where x is a number between 1 and 254, except 100), and
the default subnet mask is 255.255.255.0.
Login the Web Smart Switch
1 Use Internet Explorer 7.0 or above Web browser, enter default IP
address http://192.168.0.100
2 To access the Web interface then the Web login screen appears in
Figure 1
Default IPAddress: 192.168.0.100
Default Password: admin

Quick Installation Guide for GSW-1602SF / GSW-2404SF
- 5 -
# Notice:
The following screen based on GSW-2404SF, for GSW-1602SF the
display will be the same to GSW-2404SF.
Figure 1. Web Login Screen of GSW-2404SF
After entering the password (default password is “admin”) in login screen
(Figure 1 appears). The Web main screen appears as Figure 2.

Quick Installation Guide for GSW-1602SF / GSW-2404SF
- 6 -
Figure 2. Web Main Screen of GSW-2404SF
Now, you can use the Web management interface to continue the Switch
management, please refer to the user manual for more.
# Notice:
For security reason, please change and memorize the new password after
this first setup.

Quick Installation Guide for GSW-1602SF / GSW-2404SF
- 7 -
While IP Address be changed or forgotten admin
password –
To reset the IP address to the default IP Address “192.168.0.100” and
the password to factory default mode (default password is admin). Press
the hardware reset button at the front panel about 5 seconds. After the
device is rebooted, you can login the management Web interface within
the same subnet of 192.168.0.xx and default password.
Hardware Reset
Customer Support
Thank you for purchase PLANET products. You can browse our online
FAQ resource at the PLANET Web site first to check if it could solve you
issue. If you need more support information, please contact PLANET
switch support team.
PLANET online FAQ :
http://www.planet.com.tw/en/support/faq.php?type=1
Switch support team mail address :
[email protected]
Copyright ©PLANET Technology Corp. 2009.
Contents subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All
other trademarks belong to their respective owners.
CE
2010-A82070-003