Planet WGSW-2620HP User manual

24-Port 10/100Mbps + 2 Gigabit TP/SFP Combo
Managed 802.3at PoE Switch
WGSW-2620HP
Quick Installation Guide

Table of Contents
1. Package Content.......................................................................................... 3
2. Requirements .............................................................................................. 4
3. Terminal Setup ............................................................................................ 5
4. Logon to the Console ................................................................................... 6
5. Congure IP Address ................................................................................... 7
6. Start Web Management................................................................................ 9
7. While IP Address be changed or forgotten admin password – ........................11
8. Customer Support .....................................................................................12

3
1. Package Content
Thank you for purchasing PLANET 24-Port Fast Ethernet + 2-Port Gigabit TP/
SFP Combo Managed 802.3at PoE Switch – WGSW-2620HP. Terms of “Managed
Switch” means the WGSW-2620HP of this Quick Installation Guide.
Upon open the box of the Managed Switch and carefully unpack it. The box should
contain the following items:
The Managed Switch x 1
This Quick Installation Guide x 1
User’s Manual CD x 1
Power Cord x 1
Rubber Feet x 4
 Two Rack-mounting Brackets with Attachment Screws x 1 (Set)
 RS-232 DB9 Male Console Cable x 1
If any item is found missing or damaged, please contact your local reseller
for replacement.

4
2. Requirements
The Managed Switch provide remote Web interface for manage; the following
equipments are necessary for further management.
Workstation installed with Ethernet NIC (Network Interface Card)
The operate system of subscriber PC that running Windows XP/2003, Vista,
Windows 7, MAC OS X, Linux, Fedora, Ubuntu or other platform compatible with
TCP/IP protocols.
Ethernet Port connect
Network cables - use standard network (UTP) cables with RJ45 connectors.
Above Workstation installed with WEB Browser and JAVA runtime environment
Plug-in
Serial Port connect
Above PC with COM Port (DB-9 / RS-232) or USB-to-RS-232 converter
Note
It is recommended to use Internet Explore 6.0 or above to access
the Managed Switch.

5
3. Terminal Setup
To congure the system, connect a serial cable to a COM port on a PC or
notebook computer and to serial (console) port of the Managed Switch. The console
port of the Managed Switch is DCE already, so that you can connect the console
port directly through PC without the need of Null Modem.
PC / Workstation
with
Termianl emulation software
RS-232
Serial Port Serial Port
57600,8,n,1
Managed Switch
Figure 3-1 Serial / Console connection
A terminal program is required to make the software connection to the Managed
Switch. Windows’ Hyper Terminal program may be a good choice. The Hyper
Terminal can be accessed from the Start menu.
1. Click START, then Programs, Accessories and then Hyper Terminal.
2. When the following screen appears, make sure that the COM port should be
congured as:
 Baud : 57600
 Parity : None
 Data bits : 8
 Stop bits : 1
 Flow Control : None
Figure 3-2 Hyper Terminal Setting

6
4. Logon to the Console
Once the terminal has connected to the device, power on the Managed Switch, the
terminal will display that it is running testing procedures.
Then, the following message asks the login user name and password. The factory
default user name / password as following and the login screen in Figure 4-1
appear.
User name: admin
Password: admin
Figure 4-1 Managed Switch Console Login screen
Note
1. For security reason, please change and memorize the new pass-
word after this first setup.
2. Only accept command in lowercase letter under console inter-
face.

7
5. Congure IP Address
The Managed Switch is shipped with default IP address as following.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Managed
Switch, please use the procedures as follow:
Show the current IP address
1. On “Switch#” prompt, enter “congure”
2. On “Switch(cong)#” prompt, enter “show ip”.
3. The screen displays the current IP address, Subnet Mask and Gateway. As show
in Figure 5-1.
Figure 5-1 Show IP Information Screen
Congure IP address and Default Gateway
4. On “Switch(cong)#” prompt, enter the following command and press
<Enter>. As show in Figure 5-2.
Switch(cong)# ip address 192.168.1.100 255.255.255.0
Switch(Cong)# ip default-gateway 192.168.1.254

8
The previous command would apply the follow settings for the Managed Switch.
IP: 192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 5-2 Set IP Address Screen
5. Repeat Step 1 to check if the IP address is changed.
 Store current switch conguration
6. On “Switch(cong)#” prompt, enter the following command and press
<Enter>.
Switch(cong)# copy running-cong startup-cong
If the IP is successfully congured, the Managed Switch will apply the new IP
address setting immediately. You can access the Web interface of the Managed
Switch through the new IP address.
Note
If you do not familiar with console command or the related param-
eter, enter “help” anytime in console to get the help description.

9
6. Start Web Management
The Managed Switch provides a built-in browser interface. You can manage it
remotely by having a remote host with Web browser, such as Microsoft Internet
Explorer, Mozilla Firefox, Google Chrome or Apple Safari.
Managed Switch
RJ-45/UTP-Cable
PC / Workstation
with
IE Browser
IP Address:
192.168.0.x
IP Address:
192.168.0.100
Figure 6-1 IP Management Diagram
The following shows how to startup the Web Management of the Managed Switch,
please note the Managed Switch is congured through an Ethernet connection,
make sure the manager PC must be set on the same IP subnet address.
For example, the default IP address of the Managed Switch is 192.168.0.100 (the
factory-default IP address), then the manager PC should be set at 192.168.0.x
(where x is a number between 1 and 254, except 100), and the default subnet
mask is 255.255.255.0.
Login the Managed Switch
1. Use Internet Explorer 6.0 or above Web browser, enter IP address
http://192.168.0.100 (the factory-default IP address or that you have just
changed in console) to access the Web interface.
2. When the following dialog box appears, please enter the default user name
“admin” and password “admin”. The login screen in Figure 6-2 appears.
Default IP Address: 192.168.0.100
Default User name: admin
Default Password: admin

10
Figure 6-2 Web Login Screen of WGSW-2620HP
3. After entering the user name and password, the Web main screen appears as
Figure 6-3.
Figure 6-3 Web Main Screen of WGSW-2620HP Managed Switch
Now, you can use the Web management interface to continue the Managed Switch
management, please refer to the user manual for more detail.
Note
For security reason, please change and memorize the new pass-
word after this first setup.