Planet WGS3-2840 User manual

24-Port 10/100Mbps + 4G TP / SFP Combo Layer 3
Managed Ethernet Switch
Data Sheet
1
For network security enhance, the PLANET WGS3-2840 provides 512 IEEE
802.1Q VLAN groups to segment the port-based networks and the static
MAC address / MAC address filtering function and comprehensive Access
Control List (ACL) for enforcing security to the edge as well. For network
Ethernet traffic analysis, the PLANET WGS3-2840 provides port mirroring
function to monitor the traffic on its Ethernet ports, and it also equips with
QoS features to enhance services offered by telecoms. This function provides
priority queues per port for different types of traffics, allowing
administrators to set policies for classified filtering and rule-based rate
limitation.
Designed to offer the guaranteed IP Layer 3 routing with RIP, OSPF and
DHCP relay function support, the WGS3-2840 empowers the performance
of pure IP-based network easier than ever. The IGMP snooping function
helps to build a multimedia networks like video-conference and etc.
With its built-in Web-based management, the PLANET WGS3-2840 offers
an easy-to-use, platform-independent management and configuration
facility. The PLANET WGS3-2840 supports standard Simple Network
Management Protocol (SNMP) and can be managed via any standard-based
management software. For text-based management, the WGS3-2840 can
also be accessed via telnet method and the console port.
For easier to configure multiple WGS3-2840 with the same setting in a short
time, the PLANET WGS3-2840 provide current configuration backup /
restore function. It also provides new firmware upgrade through the Web
interface for enhancing the performance of the WGS3-2840.
WGS3-2840
To fill the demand of Layer 2 (Data Link) and Layer 3 (Network) multi-layer
applications from enterprises and campuses, PLANET releases the new
generation Layer 3 24-Port 10/100Mbps plus 4G TP/SFP Combo Layer 3
Managed Ethernet Switch, WGS3-2840.
The PLANET WGS3-2840 equips with 24-Port 10/100Mbps with 4 Gigabit
TP/SFP Combo interfaces plus the powerful Layer 2 management functions /
Layer 3 routing feature. Its 24 10/100Mbps and 4 Gigabit TP ports support
Auto-Negotiation for optimal speed detection through RJ-45 Category 5/5e
or 6 cables. All the ports support Auto-MDI/MDI-X that can automatically
detect the types of connection to any Ethernet devices without requiring
special straight or crossover cables. The 4 SFP interfaces together with 4
Gigabit TP ports by default, shared with port 25 to port 28. With the
PLANET mini-GBIC fiber-optic module installed, it offers incredible
extensibility, flexibility and connectivity to the other core switches or servers.
For universal demand and application of Layer 2, the PLANET WGS3-2840
provides high effective management functions, such as per port disable /
enable, speed duplex, flow control settings, bandwidth control and per port
Ethernet traffic statistics for counter. To improve the performance of entire
network environment, the PLANET WGS3-2840 provides IEEE 802.1d
Spanning Tree and IEEE 802.1w Rapid Spanning Tree function. For optimal
LAN connection and diagnose between two node switch devices, the link
aggregation is the ideal solution and it supports up to 12 link aggregation
groups.

Data Sheet
2
Layer 2 Features
• The 10/100Base-TX ports support auto-sensing and auto-negotiation
• Provides wire speed of Layer 2 switching performance
• Supports up to 16K MAC address entries
• IEEE 802.3x Flow Control for Full-Duplex mode and Back-Pressure of
Half-Duplex mode
• Provide Store-and-Forward forwarding scheme
• Provides Broadcast storm protection
• Supports IGMP snooping
• Supports 802.1Q Tagged VLAN for dynamic VLAN Management ,
512 VLAN groups support
• Supports Spanning Tree Protocol with IEEE 802.1d STP and IEEE
802.1w RSTP
• Link Aggregation bandwidth gathering supports 12 link aggregation
groups, 12 link aggregation groups
• Provides Port Mirror (many-to-1)
• Bandwidth control on each port
• ARP configuration support
IP Routing Features
•IP Routing protocol supports RIP v1/v2, OSPF protocol
•Routing interface provides Per-Port routing and VLAN routing mode
Multicast Routing Features
•Supports IGMP Snooping
Security
• User/Password protected system management
• L2/L3/L4 ACL (Access Control List)
• Static MAC address and MAC address filtering function
• MAC address learning function
• MAC address aging-time function
Quality of Service
• IEEE 802.1p based on CoS
• IP TOS/Precedence and DSCP based on CoS
• 8 priority queues per port
• Policy based on DiffServ per port
• Supports for strict priority and Weighted Round Robin (WRR) CoS
policies
Management
• Provides 1 male DB9 RS-232 console interface
• Supports Command Line Interface switch management
• Supports Web management for switch
• Supports SNMP switch management
• Supports DHCP relay function
• Supports software and configuration upload/download via Ethernet
connection
• Supports Ping and telnet function
• Supports RMON groups 1, 2, 3, 9
Key Feature
WGS3-2840

24-Port 10/100Mbps TP + 4-Port Gigabit TP/ SFP Combo Layer 3
Managed Ethernet Switch
Product
Specification
Model
Hardware Specification
10/100Base-TX Ports
10/100/1000Base-T Ports
SFP/mini-GBIC Slots
Switch Architecture
Switch Fabric
Switch Throughput
Address Table
Layer 3 Routing Table
Buffer Memory
Flow Control
Management Function
Management Interface
Port Configuration
Port Statistics
Bandwidth Control
Spanning Tree Function
IEEE 802.3ad Link Aggregation
IP Routing Protocol
Access Control List
VLAN
ARP Configuration
MAC Address Security
QoS
IGMP Snooping
Port Mirroring
DHCP Relay
Broadcast Storm Control
Standards Conformance
Regulation Compliance
Standards Compliance
Physical Specifications
Dimensions
Weight
Environment Specifications
Operating
Storage
WGS3-2840
24 RJ-45 Auto-MDI/MDI-X ports
4 RJ-45 Auto-MDI/MDI-X ports
4 SFP interfaces
Store-and-Forward
12.8Gbps Capacity
9.5Mpps
16 K MAC address table with Auto learning function
4 K MAC address table
32MB
Back pressure for Half-Duplex , IEEE 802.3x Pause Frame for Full-Duplex
Console, Telnet , Web, SNMP
Port disable/enable. Auto-negotiation 10/100Mbps full and half duplex mode selection. Flow
Control disable / enable. Bandwidth control on each port
Display each port’s management status, link status and detail information about receive traffic
In-band and out-band bandwidth control on each port
IEEE 802.1d Spanning Tree and IEEE 802.1w Rapid Spanning Tree
Supports 12 groups of 8 member ports maximum
Static Route, RIPv1/v2, OSPF
L2/L3/L4 ACL (Access Control List) support
IEEE 802.1Q Tagged Based VLAN ,up to 512 VLAN groups
Support
Static MAC address / MAC address filtering
Traffic classification based on Port Number, 802.1p priority and DSCP field in IP Packet
Allows to be disabled or enable.
Many-to-1
Disable or enable
Broadcast / Multicast / Destination lockup Failed storm control support
FCC Part 15 Class A, CE
IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
IEEE 802.3z Gigabit 1000Base-SX/LX
IEEE 802.3ab Gigabit 1000Base-T
IEEE 802.3x Flow Control
IEEE 802.3ad Port trunk with LACP
IEEE 802.1d Spanning tree protocol
IEEE 802.1w Rapid Spanning tree protocol
IEEE 802.1p Class of service
IEEE 802.1Q VLAN Tagging
430 x 43 x 250mm (W x H x D), 1U height
3.11 KG
Temperature: 0 ~ 50 degree C
Relative Humidity: 20% ~ 85% (non-condensing)
Temperature: -40 ~ 70 degree C
Relative Humidity: 20% ~ 90% (non-condensing)
Data Sheet
3
WGS3-2840

PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property or
their respective owners. Copyright©2007 PLANET Technology Corp. All rights reserved.
08-07 C-WGS32840-1
PLANET Technology Corporation
11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan R.O.C.
Tel: [phone] Fax: [phone]
Email: [email protected] www.planet.com.tw
VoIP Gateway: vip.planet.com.tw
4
Data Sheet
Applications
Core Routing Switch
With 24 10/100Mbps ports, 4 Gigabit TP / SFP combo interfaces and Layer 3 IP/Multicast Routing capability, the WGS3-2840 provides a
cost-effective and high-performance solution for Telecoms, Network Service Providers and enterprises.
Department Security and QoS Switch
With its 12.8 Gigabits per second and non-blocking switch fabric, the WGS3-2840 can easily provide a local, high bandwidth, and
Gigabit Ethernet network for backbone of departments. With the four SFP ports, the WGS3-2840 provides the uplink to the backbone
network through Gigabit Ethernet LX / SX SFP modules. With the security and QoS features, it improves the network to be remote
efficient and protects the network clients.
WGS3-2840
Edge Switch
Other L3 Switch
WGS3 Layer 3 Switch
10km
Server Farm Router
Internet
VLAN 2
VLAN 100
VLAN 3 VLAN 4
VLAN 200
1000Base-SXLX
1000Base-T
100Base-FX
100Base-TX
Video
Data
Voice
FTTx Node
10 Km
40 Km
Work Group
Switch
Fast Ethernet
Media Converter
20 Km
20 Km
2 Km
2 Km
FTTP
FTTB
FTTH
ISP
WGS3 ISP Node Routing
24-Port 10/100Mbps + 4 Gigabit TP/ SFP combo Layer 3 Managed Ethernet Switch
WGS3-2840
Ordering Information
SFP-Port 1000Base-T Module
SFP-Port 1000Base-SX mini-GBIC module
SFP-Port 1000Base-LX mini-GBIC module
SFP-Port 1000Base-LX mini-GBIC module-30km
SFP-Port 1000Base-LX mini-GBIC module-50km
SFP-Port 1000Base-LX mini-GBIC module-70km
SFP-Port 1000Base-LX mini-GBIC module-120km
SFP-Port 1000Base-LX (WDM, TX:1310nm) mini-GBIC module-10km
SFP-Port 1000Base-LX (WDM, TX:1550nm) mini-GBIC module-10km
SFP-Port 1000Base-LX (WDM, TX:1310nm) mini-GBIC module-20km
SFP-Port 1000Base-LX (WDM, TX:1550nm) mini-GBIC module-20km
SFP-Port 1000Base-LX (WDM, TX:1310nm) mini-GBIC module-40km
SFP-Port 1000Base-LX (WDM, TX:1550nm) mini-GBIC module-40km
MGB-GT
MGB-SX
MGB-LX
MGB-L30
MGB-L50
MGB-L70
MGB-L120
MGB-LA10
MGB-LB10
MGB-LA20
MGB-LB20
MGB-LA40
MGB-LB40
Available Modules
ISP/Telecom Backbone Routing SwitchCore Routing Switch