Planika PrimeBox User manual

Copyright Planika Sp. z o.o. www.planikafires.com i1111#03 02.11.2017 1
INSTALLATION MANUAL
PrimeBox#4 REMOTE
A
x 1
BC
x 1 x 1
D E
x 3 x 3
FG
x 3 x 1
H I J
x 1 x 1 x 1
O5x20
M6x52
O8x60
H
H1H2
D4D2
D3
H1
H
L2L1L2
D
L
D1
[mm [‘’
H
865
34
1
/
16
H1
715
28
1
/
8
H2
150
5
7
/
8
L
875
34
7
/
16
L1
762
30
L2
56,5
2
1
/
4
D
335
13
3
/
16
D1
320
12
5
/
8
D2
274
10
13
/
16
D3
26
1
D4
20
13
/
16
Fixed unit’s weight
= 38,5 kg / 84,9 lb
Adapter AC
Service Kit
Automatic
fuel pump

Copyright Planika Sp. z o.o. www.planikafires.com i1111#03 02.11.2017 2
!
• Do not install the device in areas with a capacity of less than 58 m
3
/ 2048 ft
3
(22 m
2
/ 237
ft
2
with a height of 2. m / 8.53 ft).
• While installing the device according to the instruction manual local and national
guidelines are to be observed.
• Place the device on a levelled surface. The cavity for the device has to be designed with
the use of a spirit level.
• Do not obstruct the ventilation slots and/or ventilators.
• Do not install the device in areas of large drafts of air, near fans, vents, etc.
• Do not place in areas where there might be a potentially explosive atmosphere of paint
vapours, industrial dusts, etc.
• No flammable items should be placed in direct contact and within a 1 m / 3.28 ft from the
device. Do not place near curtains, net curtains, etc.
• Do not expose the device to meteorological conditions. The device is for indoor use only.
• Do not place the device in close proximity to sources of humidity.
• It is obligatory to have a carbon-dioxide (CO
2
) or dry chemical extinguisher placed nearby
the device.
• The room in which the device will be installed must have efficient ventilation to ensure air
exchange in the room at least once per hour.
• Do not start the device before a complete and proper installation.
• Do not fill the fuel container before placing the product into its final position.
• In case of mounting more than one unit in the room, the minimal cubature is the sum of
cubatures required for each unit.
• The bearing capacity of the substrate, on which the device will be installed, must be at
least 77 kg / 1 9,8 lb.
• The device must be place out of reach of: children, animals and unauthorized persons..
• Do not install the device in mobile facilities (e.g. trailers, yachts).

Copyright Planika Sp. z o.o. www.planikafires.com i1111#03 02.11.2017 3
A socket (230V, 50Hz), should be placed near the installation point, so that the device can be
powered.
he wall on which the device is hung can be made of any material such as concrete, brick,
plasterboard or wood. he wall can be covered with any paint. Wallpaper is forbidden behind the unit, but
above acceptable.
Due to fire safety, under no circumstances can there be placed any flammable materials
within a 1 m (40 inches) from the device.
min 1000 mm
min 39
3
8 "
min. 1000 mm
min. 39
3
8 "
min. 1000 mm
min. 39
3
8 "
min 1000 mm
min 39
3
8 "
min 1000 mm
min 39
3
8 "
min 1000 mm
min 39
3
8
"
min 1000 mm
min 39
3
8
"
WARNING! The product must be situated on the floor.

Copyright Planika Sp. z o.o. www.planikafires.com i1111#03 02.11.2017 4
Installation
1. Apply bar hanger ‘C’ to the wall. While doing so, use level to make sure that it is applied straight. he
aim of the bar hanger, is to secure the unit from accidental overturn.
Apply the mounting batten to the wall and level it. At the height of 820 mm, mark the perforation spots
(for screws or pegs).
a. Uniform hard surface (e.g. concrete, brick)
C
D
Ø 8x70mm
Ø
5
/
16
x 2
3
/
4
“
D
C

Copyright Planika Sp. z o.o. www.planikafires.com i1111#03 02.11.2017 5
b.
he surface of the plasterboard.
c. he surface of the wood.
Ø 13 mm
Ø 1
3
/
16
“
E
E
C
8 ÷ 16 mm
5
/
16
÷
5
/
8
“
Ø 2x40 mm
Ø
1
/
16
x 1
9
/
16
“
C
F

Copyright Planika Sp. z o.o. www.planikafires.com i1111#03 02.11.2017 6
2.
Installation.
A
A
3. empered glass installation. empered glass installation is optional.

Copyright Planika Sp. z o.o. www.planikafires.com i1111#03 02.11.2017 7
WARNING !!!
• Make sure that the product has been correctly installed and read the attached instruction manual.
• You are not allowed to fill the fuel tank and start the device before having read the instruction
manual.
• If in the future it is necessary to take the device out of the housing, wait until the fuel has burned-up
completely and the display shows , disconnect the power supply and take the device out of
the housing.
• Keep this instruction manual throughout the lifetime of the device.
FUEL