Plantronics BackBeat PRO 2 User manual

BackBeat PRO 2
BackBeat PRO 2 Special Edition
User Guide

Contents
Overview 3
Volume 3
Play/pause music 3
rack selection 3
Open Listening 3
Active Noise Canceling 3
Charge 3
Mute/unmute 4
Answer a call 4
End a call 4
Call back last call 4
Power on/off 4
Pair mode 4
Be safe 4
Pair 5
Get Paired 5
NFC pairing (Android) 5
Pair second device 5
More Features 6
Use sensors 6
Reset Sensors 6
Get Plantronics HUB 6
Support 7
2

Overview
R
Open Listening
OFF
ANC 3.5mm
Volume Rotate the volume wheel forward (+) or backward (–) to control the volume.
Play/pause music
ap the Play/pause button.
NOTE Because your headset is equipped with sensors, if you are playing music and you take off your
headset, your music pauses. If you put on your headset, your music resumes (functionality varies by
application and doesn't function with web-based apps .
rack selection
ap the Forward button or Back button to control the track selection.
Open Listening
1 o hear your surroundings, slide the switch to activate Open Listening mode when not on a call.
2o increase or decrease the level, rotate the volume wheel forward (+) or
backward (–), when not on a call.
Active Noise Canceling Slide the switch to activate or deactivate ANC to block out unwanted noise.
Charge It takes up to 3 hours to fully charge your headphones. he LEDs turn off once
charging is complete.
=
=
=
=
=
3

TIP To check the headphones battery status, tap the Call button while wearing your headphones.
Headphones must be in idle state.
Your headphones have up to 24 hours of listening time.
Mute/unmute While on an active call, choose:
• ap the red Mute button
• ake off/put on your headset while on an active call (requires active smart sensors)
Answer a call Choose:
• Put on the headset to answer call, or
• ap the Call button
End a call ap the Call button to end current call.
Call back last call
Double-tap the Call button .
Power on/off
Slide the switch to power on or off.
Pair mode
Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and blue.
Be safe
Please read the safety guide for important safety, charging, battery and regulatory information
before using your new headset.
4

Pair
Get Paired he first time you power on your headphones, the pairing process begins.
NOTE If your phone supports Near Field Communication (NFC go to NFC pairing (Android).
1Slide the power switch on. You hear "pairing" and the LEDs flash red and blue.
2Activate Bluetooth® on your phone and set it to search for new devices.
•iPhone Settings > Bluetooth > On*
•Android Settings > Bluetooth: On > Scan for
devices* NOTE *Menus may vary by device.
3Select “PL BB PRO 2.”
If necessary, enter four zeros (0000) for the passcode or accept the connection. Once
successfully paired, you hear “pairing successful” and the LEDs stop flashing.
NFC pairing (Android) 1 ack eat PRO 2 Special Edition only Ensure NFC is on and your phone’s display
is unlocked. (Phones may vary.)
2ap and hold the headphones to the phone’s NFC tag location until NFC pairing
completes. If necessary, accept the connection.
NOTE The headphone’s NFC tag is located on the outside of the left ear cup.
(Phone tag locations vary.
L R
Pair second device 1Slide and hold the power button towards the Bluetooth icon until the LEDs flash red and blue.
2Activate Bluetooth on your second device and follow steps 2 and 3 in "Get Paired."
5

More Features
Use sensors Smart sensors respond when you put on or take off your headphones.
Putting on your headphones will:
•Resume paused music
•Answer an incoming mobile call
Taking off your headphones will:
•Pause music (while music is playing)
Enabling or disabling sensors
When your headphones are powered on and in an idle state, press and hold the Mic
button and the Call button for more than 4 seconds until you hear "Smart sensors
off." Repeat to reactivate.
Reset Sensors You may need to reset the sensors if they are not working as expected.
o reset the headset sensors, connect it directly to your computer's USB port, and place
it, with the ear cups up, on a flat, non-metallic surface for more than 10 seconds.
Get Plantronics HUB
Discover how Plantronics Hub applications bring additional functionality to your
headset. Go to plantronics.com/software and download Plantronics Hub to:
•Change language (Plantronics Hub for Windows and Mac only)
•Receive firmware updates (Plantronics Hub for Windows and Mac only)
•Personalize headset settings
•Find a lost headset