Plantronics Backbeat FIT User manual

BackBeat FIT
User Guide

Contents
Welcome 3
What's in the box 4
Get paired 5
Headset overview 6
Take control 7
Power on or off 7
Play or pause music 7
Skip to next track 7
Play previous track 7
Volume 7
Mute 7
Pairing mode 7
Reconnect 7
Charge 8
Fit 9
Check battery level 10
DeepSleep Mode 11
Specifications 12
2

Congratulations on purchasing your new Plantronics product. This guide contains instructions for
setting up and using your Plantonics BackBeat Fit.
Please refer to the safety instructions for important product safety information prior to
installation or use of the product.
Welcome
3

Headphones
USB charge cable
What's in the box
4

The first time you power on your headphones, the pairing process begins.
1Power on the headphones by pressing the power button until you hear "pair mode" and the LED
light flashes red and blue.
2Activate Bluetooth®on your phone and set it to search for new devices.
•iPhone Settings > Bluetooth > On*
•Android Settings > Bluetooth: On > Scan for devices*
NOTE *Menus may vary by device.
3Select “PLT_BBFIT.”
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear “pairing successful” and the indicator light stops flashing.
Get paired
5

Power button
Headset indicator light
Call button
Charge port
Volume button: Increases or decreases volume
Audio button: Play or pause music, track forward or track back
Headset overview
6

Press the Power button until you hear “power on"/"power off."
Tap the Audio button.
Press the Audio button twice.
Press the Audio button until you hear the confirmation tone to restart the current track. Press
the button twice (each press until the confirmation tone sounds) to go to the previous track.
To increase the volume, tap the Volume button. To decrease the volume, press and hold the
Volume button.*
*Android phone must be set to medium/high or audio will sound to low.
While on a call, tap the Audio button. You will hear “mute on” or “mute off.” An alert repeats
every 5 minutes when mute is on.
To enter pairing mode after the first pairing process, start with the headphones powered off and
then press and hold the Power button until you hear "pairing."
Your headphones try to reconnect after a lost Bluetooth connection. If they can’t, press any
button once or manually reconnect via the phone’s Bluetooth device menu.
Take control
Power on or off
Play or pause music
Skip to next track
Play previous track
Volume
Mute
Pairing mode
Reconnect
7

The door covering the charging port is located on the right headphone. Open it with your
fingernail. For best performance, fully charge your battery before use.
NOTE Quick Charging: the headphones can charge for 15 minutes to provide approximately 1 hour of
music listening time.
It takes up to 2 hours to fully charge the headphones from a completely drained battery state.
While charging, the indicator light is red and turns blue once charging is complete.
Charge
8

1For the best sound performance and a secure comfortable fit, drape around the back of your head.
2Rotate the eartip between a plus and minus 20° range to achieve an optimal fit and sound
experience.
Fit
9

To check the battery level tap the Power button while your headphones are powered on. Your
headphones will announce battery status.
"Battery full" = fully charged
"Listen time 6-8 hours" = battery level 6-8 hours
"Listen time 3-5 hours" = battery level 3-5 hours
"Listen time 1-2 hours" = battery level 1-2 hours
"Battery low and power off" = drained battery
Check battery level
10