Plantronics Marque 2 M165 User manual

This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
User Guide
Marque 2™
M165™

2
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Contents
What’s in the box 3
Headset overview 4
Pairing 5
Pair first time 5
Pair another phone 5
Charge 6
Fit 7
Adjust the fit 7
The basics 8
Make/take/end calls 8
Mute 8
Adjust the volume 8
Stream audio 8
More features 9
Save power 9
Decipher the lights 9
Hear it whisper 9
Disable voice commands 9
Specifications 10
Support

3
Car charger
Combo cable chargerHeadset
Earloop
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
What’s in the box

4
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Headset overview
Power button
Call button
Charge port
Headset LED (indicator light)
/Volume/mute button
Be safe! Please read the safety guide for important safety, charging,
battery and regulatory information before using your new headset.

5
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Pairing
The first time you switch on your headset it begins the pairing process.
1 Place the headset on your ear and turn it on.
2 While the headset LEDs are flashing red and white, activate Bluetooth® on your phone
and set it to search for new devices.
 • iPhone:Settings>General>Bluetooth>On
 • Android™Smartphones:Settings>Wireless&Networks>Bluetooth:On>Scanfordevices
 NOTEMenus may vary by device.
3 Select “PLT_M165.”
4 If your phone asks, enter four zeros (0000) for the passcode or accept the connection.
The indicator light stops flashing red and white once successfully paired.
Multipoint technology lets you pair a second phone and answer calls from either phone.
1 Power on your headset.
2 Press and hold the Call button until the indicator light flashes red and white or you
hear “pairing.”
3 While the indicator light flashes red and white, activate Bluetooth on your phone and set
it to search for new devices.
4 Select “PLT_M165.”
5 If your phone asks, enter four zeros (0000) for the passcode or accept the connection.
The indicator light stops flashing red and white once successfully paired.
Pair first time
Pair another phone

6
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Charge
Your new headset has enough power to pair and make a few calls. It takes two hours to fully
charge the headset; the indicator light turns off once charging is complete.

7
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Fit
The universal-fit eartip has a thin loop that bends to gently tuck into the contours of either
ear. Rotate the eartip on the headset or add the optional clip-on earloop to adjust the fit.
Adjustthet

8
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
The Basics
Answeracall
Choose:
 • Say“Answer”aftercallisannounced,or
 • TaptheCallbutton
 Answerasecondcall
First, tap the Call button to end current call, then tap the Call button again to answer
new call.
 Endacall
Tap the Call button to end current call.
 Rejectacall
Choose:
 • Say“Ignore”aftercallisannounced,or
 • PressCallbutton for 2 seconds
 Callbacklastcall
To dial your last number you dialed, double-tap the Call button .
 Voicedial(phonefeature)
Press the Call button for 2 seconds, wait for phone prompt and then tell the phone
to dial the name of a stored contact.
You can mute the microphone during a conversation.
During a call, tap the Volume / Mute /until you hear “mute on” or “mute off.”
While the microphone is muted, an alert repeats every 15 minutes.
Tap the Volume / Mute /button to cycle through preset levels.
Streaming audio is controlled using your phone, but when a call rings, the audio
automatically pauses to allow you to answer or ignore the call. Once the call is ignored
or ends, the streaming audio is resumed.
Make/take/endcalls
Mute
Adjustthevolume
Stream audio

9
If you leave your headset powered on but out of range of your paired phone for more than 90
minutes, your headset will conserve its battery power by entering into a DeepSleep™mode.
Once back in range with your phone, tap the Call button to exit DeepSleep mode. If your
phone is also ringing, tap the Call button again to answer your call.
Your headset has an indicator light that flashes in response to a change in status or after
a button press.
Some examples of what you will see are:
 • Solidreduntilchargingcompleteandthenoff
 • Flashingredandwhiteduringpairing
 • Tripleredashwhenlessthan10minutesoftalktime
 • Triplewhiteashatincomingcall
Your headset tells you about status changes in English. For example:
 • “Poweron”
 • “Pairingsuccessful”
 • “Talktime(x)hours”
 • “Muteon”
 • “Lostconnection”
 • “Rechargeheadset”
This headset only speaks and understands English. If you prefer to use the Call button
to answer or reject calls, you can disable the voice commands “Answer” or “Ignore.”
With the headset powered on, simultaneously press the Call and Volume buttons until
you see the indicator light flash white two times. Repeat these steps to reactivate
the commands.
Simply check the Headset battery meter on your iPhone (automatically displayed) or
Android smartphone (enabled by the MyHeadset™or Find Myheadset™apps)
Save power
Decipherthelights
Hear it whisper
Disablevoicecommands
Checkingbatterylevel
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
More features

10
This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
Specifications
Talktime Up to 7 hours
Standbytime Up to 11 days
Headset weight 7 grams
DeepSleeptechnology • Activateswhenpairedheadsetisoutofrangefor
over 90 minutes
• Providesupto180days*ofbatteryreadiness
Multipointtechnology Use one headset to answer calls from either of two
paired Bluetooth phones
Charge connector Micro USB charging
Batterytype Rechargeable non-replaceable lithium ion polymer
Chargetime(maximum) 90 minutes for full charge
Headsetbatterymeter On-screen for iPhone. Enabled by MyHeadset™or
Find MyHeadset™apps for Android smartphones
Bluetoothversion Bluetooth v3.0
Bluetoothproles Advanced Audio Distribution Profile (A2DP), Wideband
Hands Free (HFP) Profile 1.6 and Headset (HSP)
Profile 1.2
Operatingtemperature 0 – 40°C (32°F – 104°F)
NOTEPerformance is dependent upon battery and may vary by device.

This version of the wordmark can only be
used at this size. It has a larger registration
mark than the other size wordmarks.
Please use one of the other sizes if you need
a larger version.
PlantronicsB.V.
Scorpius 140
2132 LR Hoofddorp
Netherlands
plantronics.com
plantronics.com/support
© 2012 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All other
trademarks are the property of their respective owners.
Patents US 5,712,453; Patents Pending
89142-07(10.12)
Safetyinformation:see the separate “For Your Safety” booklet
2-yearlimitedwarrantydetails:plantronics.com/warranty
Support
EN
Tel:0800410014
AR
Tel:+44(0)1793842443*
CS
Tel:+44(0)1793842443*
DA
Tel:80884610
DE
Deutschland 08009323400
Österreich 0800242500
Schweiz 0800932340
EL
Tel:+44(0)1793842443*
ES
Tel:900803666
NO
Tel:80011336
PL
Tel:+44(0)1793842443*
PT
Tel:0800844517
RO
Tel:+44(0)1793842443*
RU
Tel: [phone]
Tel:+44(0)1793842443*
SV
Tel:0200214681
TR
Tel:+44(0)1793842443*
FI
Tel:0800117095
FR
Tel:0800945770
GA
Tel:1800551896
HE
Tel:+44(0)1793842443*
HU
Tel:+44(0)1793842443*
IT
Tel:800950934
NL
NL 08007526876
BE 080039202
LUX 80024870
*SupportinEnglish