Plantronics PULSAR 260 User manual

USER GUIDE
P UL SA RT M 260
..................................................................................
STEREO BLUETOOTH®HEADSET
Pl antronics Pulsar™260
Stereo Bluetooth headSet
U S E R G U I D E
Sold by:
http://www.TWAcomm.com
Toll Free: [phone]

2
|
TABLE OF CONTENTS
Package Contents and Feataures 3
Charging 4
Powering 4
Indicator Lights 4
Pairing 5
Making/Answering/Ending Calls 5
Wearing Options 6
Powered Speaker & Stereo Uses 6
Pendant Controls 7
Headset Controls 8
Troubleshooting 9
System Reset 9
Product Specifications 10
Warranty 10
Technical Assistance 11
Regulatory Information 11
Warnings 12
Register Your Product Online
Visit www.plantronics.com/productregistration to register your product online so we
can provide you with the best possible service and technical support.
This User Guide provides instructions on the setup and usage of the Plantronics Pulsar™
260 Bluetooth®Headset. Before getting started, please review the safety booklet included
in your package.
For additional help, service or support information, refer to product warranty card,
Troubleshooting on page 9 or visit www.plantronics.com.
WELCOME

|
3
Mute/Play/Pause
Volume up
Volume down
Track forward
Track back
PACKAGE CONTENTS & FEATURES
Pulsar 260 Headset
Sound-isolating
earbuds
2.5mm plug
Microphone with call
control button
Audio-out cable
Stereo Bluetooth Pendant
Detachable clip
Indicator light
Power on/off/Pairing
Power on/off/Pairing
2.5mm port
Mini-USB port
LanyardAC charger
Pendant
Controls:

4
|
Action Light
Charging Flashes Red
Fully charged Solid blue
Power/battery status
3 red flashes =
2 red flashes =
1 red flash =
NOTE: Flashes red
when headset is
initially powered on.
Pairing/connect Flashes red and blue
Bluetooth pendant connected
to headset
Flashes blue
CHARGING
You must charge for 3 hours before first use.
To charge, connect AC charger to pendant
mini-USB socket.
Pendant indicator light flashes red when
charging and changes to solid blue when fully
charged.
POWERING ON/OFF
Press and hold power on/off switch for >2 seconds.
PENDANT INDICATOR LIGHTS

|
5
PAIRING
To pair pendant with phone:
Begin with pendant powered on.
1. Press and hold both the
mute/play/pause button and the
power on/off/pairing button
simultaneously. When the
indicator light flashes red and
blue, release buttons.
2. While pendant is flashing red and
blue, use the phone menu to search
for Bluetooth devices and select
“260 Plantronics.”
3. When prompted for passkey,
enter 0000.
Pendant flashes blue when paired
successfully.
For set up and pairing instructions with
Bluetooth devices other than mobile
phones, please consult your Bluetooth
device user guide.
1
260Plantronics
M3000 Plantronics
M2500 Plantronics
2
0000
Enter
Passkey
3
MAKING/ANSWERING/ENDING CALLS
To make a call:
Dial on phone; call transfers
automatically to headset.
To answer or end a call:
Briefly press call control
button on headset.
To adjust volume:
Short press +or –buttons on
pendant for incremental change,
hold for continuous change.

6
|
WEARING OPTIONS
Pulsar 260 can be worn in two ways:
• Clipped to your belt or clothing
• Around your neck using the
lanyard
POWERED SPEAKER & STEREO USES
For public listening you can connect the
stereo Bluetooth pendant directly to pow-
ered speakers or your home stereo with
the included audio-out cable (provided
your speakers/ home stereo is fitted with
a Line-in or Auxiliary 3.5mm audio sock-
et). Please consult your equipment guide.
1. Ensure the stereo Bluetooth
pendant and your speakers/home
stereo are powered off.
2. Connect the audio-out cable
2.5mm plug to the stereo Bluetooth
pendant and the 3.5mm plug to to
the powered speakers/home ste-
reo Line-in or Auxiliary 3.5mm au-
dio socket as shown below.
3. Power on both the stereo
Bluetooth pendant and your
speakers/home stereo.

|
7
PENDANT CONTROLS
Key Feature Action Tone
Power on/off Short press No tone
Track forward
and back*
Short press to skip to
next track or to go back
to previous track
High tone
Mute call/audio Short press to mute/unmute Repeating low tone
every 60 seconds
Play and pause* Short press to pause/
resume audio
High tone
Adjusting volume Short press Mid tone for each
adjustment, double
low tone at limit
*Only works if Bluetooth device supports Bluetooth Audio/Video Remote Control Profile (AVRCP).
Power on/off

8
|
Key Feature Action Tone
Making/answering/ending
calls
Short key press High tone
Switching an active call
from headset to phone or
phone to headset
Long key press High tone
followed by
low tone
HEADSET CONTROLS
Key Feature Action Tone
Activate last
number redial
Double short key press High tone for each
key press
Activate voice dial Long key press High tone followed
by low tone
Call reject Long key press High tone followed
by low tone
Hands-Free Features
Features must be supported by Bluetooth device or service provider.

|
9
TROUBLESHOOTING
Problem Solution
My headset does not work
with my phone. • See page 5 “Pairing.”
• Perform a reset on Pulsar 260 as described below.
Callers cannot hear me. • Headset is muted. Press the mute button on the
pendant to unmute the microphone.
• Be sure pendant is powered on and headset is
paired with audio device. See page 5 “Pairing.”
Callers say my voice is
too quiet. Ensure that microphone is pointing towards
your mouth.
I cannot hear caller/dial
tone or audio sound. • Pendant is turned off. Check the indicator light for
status.
• Headset is out of range. Walk to within 10 metres of
the phone and check the Bluetooth link on your
phone’s display.
• Battery is dead. Charge your battery using the AC
charger supplied.
• Listening volume is too low. Press the volume up
button to increase the sound heard in the headset.
I cannot hear music from
my powered speakers/
Hi-Fi when using the audio-
out cable.
• Pendant must be turned on and connected to the
powered speakers/Hi-Fi with the audio-out cable.
• Check music player on Bluetooth phone is switched
on and Pulsar 260 is the active Bluetooth device.
SYSTEM RESET
2
1
2
A reset button is located
(recessed) behind the
clothing clip.
To reset:
1. Remove clip as shown
at right.
2. Press and release
button using a pen.

10
|
PRODUCT SPECIFICATIONS
Listen Time* Up to 7 hours
Talk Time* Up to 9 hours
Standby Time* Up to 200 hours
Charge Time 3 hours
Range Bluetooth standard 10 metres
Headset and Pendant Weight 25 grams
Power Requirements 5VDC - 300 mA
Battery Type Lithium Ion Polymer
Speaker Frequency Response •Telephony 300 Hz to 3600 Hz (CVSD)
•Stereo Audio 20 Hz to 20 kHz(16-bit 48kHz SBC Coding)
Impedance 32 +-4 Ohms x1 kHz
Distortion <5% to 19 kHz
Version Bluetooth 2.0
Supports Bluetooth Hands-Free and Headset Profiles, Advanced Audio Distribution Profile (A2 DP),
Audio/Video Remote Control Profile (AVRCP), and Generic Audio/Video Distribution Profile
(GAVDP). For stereo sound, Bluetooth enabled devices must support the Advanced Audio
Distribution Profile (A2DP).
*Performance may vary by device.
WARRANTY
LIMITED WARRANTY
• This warranty covers defects in materials and workmanship of products
manufactured, sold or certified by Plantronics which were purchased and used
in the United States.
• The warranty lasts for one year from the date of purchase of the products.
• This warranty extends to you only if you are the end user with the original
purchase receipt.
• We will at our option, repair or replace the products that do not conform to the
warranty. We may use functionally equivalent reconditioned/refurbished/
remanufactured/pre-owned or new products or parts.
• To obtain service in the U.S., contact Plantronics at (866) 363-BLUE (2583).
• THIS IS PLANTRONICS’ COMPLETE WARRANTY FOR THE PRODUCTS.
• This warranty gives you specific legal rights, and you may also have other
rights that vary from state to state. Please contact your dealer or our service
center for the full details of our limited warranty, including items not covered
by this limited warranty.